FunkTronic Major 4a Manuel utilisateur
Major 4a
Major 5a
English 1.0
m4a_5a (06.08.2012)
- 2 -
Kompetent für Elektroniksysteme
m4a_5a (06.08.2012) - 3 -
Kompetent für Elektroniksysteme
Page
Inhalt
Order Information 2
General Features 3
Control Elements Major 4a 4
Control Elements Major 5a 4
Display Elements Major 4a/5a 5
Sockets Pinout Major 4a/5a 6
Rearview Major 4a/5a 6
RS232 Interface 7
RS232 Cable for Flashing/Printing/Monitoring 7
Adjustments RS232 Interface 7
Keypad Layout in Programming Mode Major 4a 8
Keypad Layout in Programming Mode Major 5a 8
Differences between Major 4a and Major 5a 8
Menu Structure 9
Software Configuration 12
Programming Short Call 12
Individual Programming of the Buttons 13
Loudspeaker Button Coding 14
Encoder Prefix 15
Transmitting 6/7/8-Tone Sequences 15
Reset to Factory Defaults 16
Channel Scanning Function 16
FMS Option 16
Muting 5-Tone Sequence 16
Sample Configurations 4a/5a 17
Sample Configurations 4a/5a, DC controlled 17
Sample Configurations Major 4a/5a, AC controlled 18
Two-Wire Connection using FT630 19
Hardware Configuration 19
Two/Four-Wire Configuration 19
Connecting Major 4a/5a --> Two-Way-Radio via Multiwire 20
Connecting Major 4a/5a --> LIM-AC 20
Table of Registers Major 4a/5a 21
Keyboard Functions 27
Reset to Factory Defaults 31
Technical Data 32
Table of Tones 32
General Safety Information 33
Returning of Old Equipment 33
Release Notes 34
Order Information
Ord.-No. Description
681000 Major 4a Attention: Power supply units for Major
Major 4a with FMS option 4a/5a are not included!
Major 4a with BOS option
714000 Major 5a
Major 5a with FMS option
Major 5a with BOS option
900012 Power supply unit (230/12 Volt), suitable for Major 4a and Major 5a
m4a_5a (06.08.2012)
- 2 -
Kompetent für Elektroniksysteme
m4a_5a (06.08.2012) - 3 -
Kompetent für Elektroniksysteme
The Major 4a/5a is the newer design of the well-known Major 4/5 An alphanumeric LC Display with
background lighting has replaced the LED Display. A gooseneck microphone with a high dynamic
range is part of the standard equipment of Major 5a as well as Major 4a. By using a plain text based
menu structure the programmable features have been extended significantly and at the same time
programming has become more straightforward. All buttons are freely programmable. Hence, each
of the buttons can be assigned two different functions.
A radio set can be connected directly (multiwire) or via 2- or 4-wire line. All viable tone sequences
can be transmitted and interpreted.
There are two sockets for headsets. One can be used for a remote PTT foot switch. The 7 digital
outputs can be used for remote channel select or for other functions. For operation an external 12-
volt power supply is necessary.
The Major 4a/5a can be programmed via the serial interface or keypad. It is also possible to connect
a printer or a terminal to the serial interface. For printers with a parallel interface an additional
interface is available.
General Features
m4a_5a (06.08.2012)
- 4 -
Kompetent für Elektroniksysteme
m4a_5a (06.08.2012) - 5 -
Kompetent für Elektroniksysteme
Control Elements Major 4a
handpiece with
PTT button
gooseneck microphone
loudspeaker (LS)
button
call button
short call button PTT button
LC display
function buttons
special buttons
status LEDs
Control Elements Major 5a
loudspeaker
gooseneck microphone
loudspeaker button
call button
short call button
PTT button
LC display
status LEDs
volume button
m4a_5a (06.08.2012)
- 4 -
Kompetent für Elektroniksysteme
m4a_5a (06.08.2012) - 5 -
Kompetent für Elektroniksysteme
Display Elements Major 4a/5a
LC Display
All alphanumeric readouts are presented by a LC display with background lighting.
Status LEDs
Carrier Display (Squelch)
The carrier display LED can be controlled by voice (2-wire connection) or via squelch input
(using the radio set). If the light is on, the radio circuit is occupied, that is, a carrier signal (carrier
is keyed) is present.
PTT Display (Push-to-Talk)
The PTT display LED is on, if the transmitter is keyed. Keying of the transmitter is achieved by
pressing the PTT button during telephony or by sending a call.
Loudspeaker Display (Incoming Call)
The loudspeaker display LED is on, if the loudspeaker or the earphone capsule in the handpiece
are switched on.
m4a_5a (06.08.2012)
- 6 -
Kompetent für Elektroniksysteme
m4a_5a (06.08.2012) - 7 -
Kompetent für Elektroniksysteme
PWR operating voltage 12V, max. 1,5 A
inside: positive terminal, outside: earth
Rearview Major 4a/5a
Pinout I/O
Digital In/Outputs (ST3)
IN/OUT 0 1
IN/OUT 1 2
IN/OUT 2 3
IN/OUT 3 4
IN/OUT 4 5
IN/OUT 5 6
IN/OUT 6 7
GND 8
Pinout RS232
(ST4)
NC 1
NC 2
TxD 3
RxD 4
GND 5
NC 6
Pinout S/E
Radio Circuit (ST1)
AF input B 1
AF input A 2
Squelch input 3
GND 4
output +12 V, max. 200 mA 5
sender keying active, low 6
AF output A 7
AF output B 8
Pinout PTT
Headset (ST2)
GND 1
GND AF input (mic. -) 2
NF earphone 3
GND earphone 4
AF input (mic. +) 5
PTT, active GND 6
Sockets Pinout Major 4a/5a
All AF in/outputs are equipped with transformers
and, hence, potential-free. PIN 5 is for supply
(+12V) of external devices (LIM-AC, FT634C,
FT633AC).
Attention: Do not use PIN 5 to supply a radio
set. 200 mA output current is not sufficient.
There are two sockets for connecting a headset.
One is for connecting the headset, the other
for the use of an external PTT button (e.g. foot
switch)
The digital connections can be configured as
inputs or outputs, respectively. Usually, these are
used as outputs for remote channel select. To socket RS232 a printer can be connected.
All of the schemes show the sockets as viewed from the rear of the Major.
ST1
ST2AST4 ST2ST3PWR
Pinout HS
Headset (ST2A)
GND 1
AF input (mic. +) 2
AF earphone 3
GND earphone 4
GND AF input (mic. -) 5
PTT, active GND 6
m4a_5a (06.08.2012)
- 6 -
Kompetent für Elektroniksysteme
m4a_5a (06.08.2012) - 7 -
Kompetent für Elektroniksysteme
5 GND
ST4 RS232 Interface
RS232 Interface
Pinout
RS232 ST4
1
2
3
4
5
6
RS232 Cable for Flashing/Printing/Monitoring
7 GND
2 TxD RS232
3 RxD RS232
RS232 25-pin connector on computer RS232 socket on Major
TxD
RxD
GND
Pinout
RS232 ST4
1
2
3
4
5
6
TxD
RxD
GND
3 TxD RS232
2 RxD RS232
RS232 9-pin connector on computer RS232 socket on Major
Adjustments RS232 Interface
9600 baud, 8 data bits, no parity, 1 stop bit, no protocol
m4a_5a (06.08.2012)
- 8 -
Kompetent für Elektroniksysteme
m4a_5a (06.08.2012) - 9 -
Kompetent für Elektroniksysteme
Keypad Layout in Programming Mode Major 4a
Button reduces by 1 and button increases
by 1.
To the buttons S1 bis S4, * and # the values A
to F are assigned.
¡13
5
4
8
2
0
9
*
7
6
#
A
EF
+
-
S1
¡
B
S2
¡
C
S3
¡
D
S4
1 3
54
8
2
0
9
*
7
6
#
A B C
D E F
Keypad Layout in Programming Mode Major 5a
Long pressing of the buttons 1 to 6 allows to
achieve the additional values A to F.
The call button reduces by 1 and the PTT but-
ton increases by 1.
+
-
Major 4a and Major 5a show the following differences:
1. different keyboards
2. Major 4a includes a handset, Major 5a does not
3. minor differences in the software, resulting from 1. and 2.
4. optional telephone interface only for Major 4a
Differences between Major 4a and Major 5a
m4a_5a (06.08.2012)
- 8 -
Kompetent für Elektroniksysteme
m4a_5a (06.08.2012) - 9 -
Kompetent für Elektroniksysteme
Menu Structure
Simultaneuos pressing of the buttons * and # opens the menu.
Due to the different keypad designs, for the same operations different keys are used in Major 4a and
Major 5a. In the following, the handling of Major 4a is described. For the respective keys that have
to be used in Major 5a please consider the table below.
Function Major 4a Major 5a
next menu *
select menu item #
escape discarding changes *
save changes and escape #
increase value by 1
reduce value by 1
- enter the register number
to be programmed
- with 222 the factory default
values are programmed
- overwrite the code with the
desired values
1 = input level
nominal value: 300mV
indicated on the display
2 = output level
as required
3 = GN microphone level *
* and #
È
ÆÆ
È È È
- displayed 3 seconds
- the potis can be adjusted
from 0 to 255
- input directly via keypad
or
= increase value by 1
= reduce value by 1
= escape menu
discarding changes
= save changes,
escape menu
= escape menu
discarding changes
= save changes,
escape menu
select number:
EEPROM programming : F4
Next menu : F3
Software Version : F4
Next menu : F3
Level settings : F4
Next menu : F3
Register: Software: Major 4a V1.24
Date : 23.09.04
Poti-Nr. (1-6):
Register: 000
Code 12345
*
GN = gooseneck
HA = Handapparat
HS = Headset
m4a_5a (06.08.2012)
- 10 -
Kompetent für Elektroniksysteme
m4a_5a (06.08.2012) - 11 -
Kompetent für Elektroniksysteme
0 = 200 Hz
1 = 300 Hz
2 = 400 Hz
3 = 600 Hz
4 = 800 Hz
5 = 1000 Hz
6 = 1600 Hz
7 = 2400 Hz
8 = 3400 Hz
9 = 4000 Hz
S1 = 2900 Hz
S2 = 3000 Hz
S3 = 3100 Hz
S4 = 3300 Hz
* = 1200 Hz
# = 1800 Hz
= escape menu
* und #
È
continued
ÆÆÆ
È
Æ
È
= reduce contrast by 1
= increase contrast by 1
= escape menu
discarding changes
= save changes,
escape menu
È
Æ
= one digit to the left
= one digit to the right
= escape menu
discarding changes
= save changes,
escape menu
The values can be changed
directly using the buttons 0
to 9.
Menu Structure
select number:
Transmit test tone : F4
Next menu : F3
Change frequency 0.....C
F3 for ESC Hz
Kontrast einstellen : F4
nächstes Menü : F3
Displaycontrast: 90
F1- F2+ F3ESC F4STORE
Datum/Uhr einstellen: F4
nächstes Menü : F3
15.10.04 22:47:01
Autres manuels pour Major 4a
4
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels FunkTronic Système de microphone
Manuels Système de microphone populaires d'autres marques
Sennheiser
Sennheiser Evolution Wireless Digital EW-DX EM 2 Manuel utilisateur
Alpha Technologies
Alpha Technologies RBMS Manuel utilisateur
SWIT Electronics Co.,LTD.
SWIT Electronics Co.,LTD. CW-S150 Manuel utilisateur
Shure
Shure UA844 Manuel utilisateur
Panasonic
Panasonic SHFX70 - DVD HOME THEATER WIRELESS SYSTEM Manuel utilisateur
Pyle
Pyle PDWM5000 Manuel utilisateur