Fujitsu MAA3182FC Series Manuel utilisateur

C141-E054-02EN

MAA3182FC SERIES

MAF3364FC SERIES

MAG3091FC, MAG3182FC SERIES

DISK DRIVES

FIBRE CHANNEL INTERFACE SPECIFICATIONS

C141-E054-02EN i

FOR SAFE OPERATION

Handling of This manual

This manual contains important information for using this product. Read thoroughly before

using the product. Use this product only after thoroughly reading and understanding

especially the section “Important Alert Items” in this manual. Keep this manual handy, and

keep it carefully.

FUJITSU makes every effort to prevent users and bystanders from being injured or from

suffering damange to their property. Use the product according to this manual.

Functional Limitations

There may be certain functional limitations concerning the specifications and functions of the

products covered by this manual depending on the equipment version, especially concerning

the following functions.

Versions in which there functions can be used will be communicated through

“ENGINEERING CHANGE REQUEST/NOTICE”, issued by Fujitsu.

Function Equipment Version Which Supports These Functions

Equipment

Version No. EPROM

Version No. Standard INQUIRY Data Product

Revision (ASCII)

READ RAM Command These commands cannot be used in the current version.

WRITE RAM

Command

(Proceed to the Copyright Page)

C141-E054-02ENii

Related Standards

Specifications and functions of products covered by this manual comply with the following

standards.

Standard (Text) No. Name Enacting

Organization

NCITS TR-19 FIBRE CHANNEL PRIVATE LOOP

SCSI DIRECT ATTACH (FC-PLDA) American National

Standards Institute

(ANSI)

ANSI X3. 230-1994 FIBRE CHANNEL PHYSICAL AND

SIGNALING INTERFACE (FC-PH) American National

Standards Institute

(ANSI)

ANSI X3. 297-1996 FIBRE CHANNEL PHYSICAL AND

SIGNALING INTERFACE-2 (FC-PH-2) American National

Standards Institute

(ANSI)

ANSI X3. 272-199x FIBRE CHANNEL ARBITRATED

LOOP (FC-AL) American National

Standards Institute

(ANSI)

ANSI X3. 269-199x FIBRE CHANNEL PROTOCOL FOR

SCSI (SCSI-FCP) American National

Standards Institute

(ANSI)

C141-E054-02EN iii

REVISION RECORD

Edition Date

published Revised contents

01 April, 1998

02 May, 1999

Specification No.: C141-E054-**EN

The contents of this manual is subject to

change without prior notice.

FUJITSU LIMITED

This page is intentionally left blank.

C141-E054-02EN v

PREFACE

This manual explains concerning the MAA3182FC (hereinafter described as MAA31xxFC),

MAF3364FC (hereinafter described as MAF33xxFC), MAG3091FC, MAG3182FC

(hereinafter described as MAG3xxxFC) series 3.5 inch hard disk drives with internal Fibre

channel controller.

The purpose of this manual is to provide the specifications and functions of Fibre channel (FC)

for use of these magnetic disk drives incorporated into user systems, and to present the

information necessary for creating host system software. This manual is written for users who

have a basic knowledge of hard disk drives and their use in computer systems.

The composition of manuals related to these disk drives and the range of subjects covered in

this manual are shown in “Manual Organization,” provided on a subsequent page. Please use

these other manuals along with this manual as necessary.

Composition and Contents of This Manual

This manual is composed of the six chapters shown below, a glossary and a list of

abbreviations.

Chapter 1 Fibre Channel Interface

This chapter describes the topology, physical and electrical requirements, interface protocol,

and other operations of the Fibre channel (FC) interface which connects the MAA31xxFC,

MAF33xxFC, MAG3xxxFC.

Chapter 2 Command Processing

This chapter describes the basic logical specifications related to Fibre channel processing.

Chapter 3 Data Buffer Management

This chapter describes the data buffer configuration, data transfer processing functions and

cache operations.

Chapter 4 Command Specifications

This chapter describes detailed command specifications and how to use them.

Chapter 5 Sense Data and Error Recovery Methods

This chapter describes the configuration and contents of sense data which report to the host

system when an error occurs, etc., key information necessary for error recovery, recommended

procedures for error recovery to be executed through host system software and retry

processing.

Chapter 6 Disk Media Management

This chapter describes the procedure for initializing the disk media, methods of treating media

defects and data recovery methods.

vi C141-E054-02EN

Glossary

The glossary explains technical terms which are necessary to the reader’s understanding when

reading this manual.

List of Abbreviations

This list shows the full spelling of abbreviations used in this manual.

The model name of disk drives covered by this manual differs in its ending suffix (Note 1)

depending on its device type (three types), the electrical conditions of the Fibre channel

interface used to connect the disk drive to the host system and its capacity and data format at

the time it was shipped, but in this manual, except in cases where models need to be especially

distinguished, a representative model name (Note 2) is used. In addition, these disk drives are

called Intelligent Disk Drive (IDD), “drive” or “device” in this manual.

Note 1: Model Name

M AF 3364 FC

Interface type FC: Fibre Channel

Formatted capacity (100 MB units)

Disk size 3: 3.5 inch

Type AA: 1.6 inch height, 7,200 rpm

AF: 1.6 inch height, 10,000 rpm

AG: 1 inch height, 10,000 rpm

Warning Indications

The following warning indications are shown in this manual to prevent the user and other

nearby persons or property from being injured or damaged.

IMPORTANT This indicates information that could help the user use the product more

efficiently.

In the text, the alert signal is centered, followed below by the indented message. A wider line

space precedes and follows the alert message to show where the alert message begins and

ends. The following is an example:

(Example)

IMPORTAMT

Before moving the drive, remove the optical disk cartridge to avoid

head or disk damage

C141-E054-02EN vii

Requesting for User’s Comments

Please use the User’s Comment Form attached to the end of this manual to identify user

comments including error, inaccurate and misleading information of this manual. Contact to

your Fujitsu representative for additional comment forms if required.

viii C141-E054-02EN

This page is intentionally left blank.

C141-E054-02EN ix

Manual Organization

Product Manual 1. Outline

2. Specifications

3. Data Format

4. Installation Conditions

5. Installation Procedure

6. Diagnosis and Maintenance

Interface Specifications

(This Manual) 1. Fibre Channel Interface

2. Command Processing

3. Data Buffer Management

4. Command Specifications

5. Sense Data and Error Recovery Methods

6. Disk Media Management

Maintenance Manual 1. Specifications and Equipment Configuration

2. Maintenance and Diagnosis

3. Troubleshooting

4. Removal and Replacement Procedures

5. Operating Theory

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Fujitsu Stockage

Fujitsu

Fujitsu MHT2020AT Manuel utilisateur

Fujitsu

Fujitsu ETERNUS DX60 S2 Manuel utilisateur

Fujitsu

Fujitsu ETERNUS AF250 S2 Manuel utilisateur

Fujitsu

Fujitsu ETERNUS DX60 S3 Manuel utilisateur

Fujitsu

Fujitsu ETERNUS LT20 S2 Comment utiliser

Fujitsu

Fujitsu MHS2030AT - 2.5" Notebook 30GB Drive Manuel utilisateur

Fujitsu

Fujitsu GP5-HDH8B Manuel utilisateur

Fujitsu

Fujitsu MHV2040BH Manuel utilisateur

Fujitsu

Fujitsu GP5-HD9G3 Manuel utilisateur

Fujitsu

Fujitsu MAS3367FC Manuel utilisateur

Fujitsu

Fujitsu ETERNUS AF S3 Series Instructions de montage

Fujitsu

Fujitsu ETERNUS DX60 Manuel utilisateur

Fujitsu

Fujitsu MHK2120AT - Mobile 12 GB Hard Drive Manuel utilisateur

Fujitsu

Fujitsu M2488 Manuel utilisateur

Fujitsu

Fujitsu M2488 Manuel utilisateur

Fujitsu

Fujitsu MHW2040AT - Mobile 40 GB Hard Drive Manuel utilisateur

Fujitsu

Fujitsu ETERNUS DX100 S4 Instructions de montage

Fujitsu

Fujitsu ETERNUS CS800 Manuel utilisateur

Fujitsu

Fujitsu ETERNUS DX60 S2 Manuel utilisateur

Fujitsu

Fujitsu ETERNUS DX S4 Series Manuel utilisateur

Fujitsu

Fujitsu SDLT 160 GBYTE Manuel utilisateur

Fujitsu

Fujitsu ETERNUS DX60 S2 Manuel utilisateur

Fujitsu

Fujitsu MAT3300NC Manuel utilisateur

Fujitsu

Fujitsu ETERNUS DX500 S4/DX600 S4 Mode d’emploi

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

HP StorageWorks MSL2024 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

HP P9000 Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur