Fujitsu ETERNUS DX60 S4 Manuel utilisateur

FUJITSU Storage

ETERNUS DX, ETERNUS AF

Configuration Guide (Power Synchronized Unit)

ETERNUS DX S4/S3 series Hybrid Storage Systems,

ETERNUS DX60 S2/DX80 S2/DX90 S2 Disk Storage Systems,

ETERNUS AF series, ETERNUS DX200F All-Flash Arrays

P3AM-8012-10ENZ0

This page is intentionally left blank.

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide (Power Synchronized Unit)

Preface

Fujitsu would like to thank you for purchasing our power synchronized unit for the ETERNUS DX/AF storage

systems.

The power synchronized unit is a device that synchronizes power operations of the ETERNUS DX/AF storage

systems with servers.

This manual introduces the user to the power synchronized unit, and explains the regular checks and

maintenance that are required.

Please carefully review the information outlined in this manual.

This manual is designed for use with the following ETERNUS DX/AF storage systems:

•ETERNUS DX60 S4/DX100 S4/DX200 S4 Hybrid Storage Systems

•ETERNUS DX500 S4/DX600 S4 Hybrid Storage Systems

•ETERNUS DX60 S3/DX100 S3/DX200 S3 Hybrid Storage Systems

•ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems

•ETERNUS DX8100 S3/DX8700 S3/DX8900 S3 Hybrid Storage Systems

•ETERNUS DX60 S2/DX80 S2/DX90 S2 Disk Storage Systems

•ETERNUS AF250 S2 All-Flash Arrays

•ETERNUS AF650 S2 All-Flash Arrays

•ETERNUS AF250 All-Flash Arrays

•ETERNUS AF650 All-Flash Arrays

•ETERNUS DX200F All-Flash Arrays

Tenth Edition

October 2017

Applicable Environment

The power synchronized unit was designed and manufactured with user safety for general office

environments in mind. When using the power synchronized unit, follow the handling instructions, placement

and cautionary notes listed in this manual. If used beyond the limits described, the users may be at risk of

personal injury and/or material damage.

Using this Manual

This manual contains important information regarding safe usage.

Please read this manual carefully before using the power synchronized unit. Pay special attention to

"Safety Precautions" (page 9), and understand the contents thoroughly before using the power synchronized

unit. Keep this manual in a safe place for future reference.

Fujitsu pays careful attention to the safe use of its products to prevent user injury and/or material damage. To

use the power synchronized unit properly, please follow the instructions in this manual.

Preface

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide (Power Synchronized Unit)

Compliance with Standards

The power synchronized unit is compliant with the following standards.

The company names, product names and service names mentioned in this document are registered

trademarks or trademarks of their respective companies.

Microsoft product screen shot(s) reprinted with permission from Microsoft Corporation.

Type Standard

Product safety UL60950-1, CSA-C22.2 No. 60950-1, EN60950-1, IEC60950-1

Electromagnetic Compatibility FCC CFR47 part 15 Class A, ICES-003 Class A, EN55022 Class A, VCCI Class A

Electromagnetic Immunity EN55024

CE certification Electromagnetic Compatibility Directive 2004/108/EC

Low Voltage Directive 2006/95/EC

Environmental compliance RoHS-compliant (Restriction of hazardous substances)

WEEE-compliant (Waste electrical and electronic equipment)

The power synchronized unit is designed, developed and manufactured as contemplated for general use,

including without limitation, general office use, personal use, household use, and ordinary industrial use,

but is not designed, developed and manufactured for use in situations with accompanying fatal risks or

dangers that, unless extremely high safety is secured, could lead directly to death, personal injury, severe

physical damage or other loss (hereinafter "High Safety Required Use"), including without limitation,

nuclear reaction control in nuclear facility, aircraft flight control, air traffic control, mass transport control,

medical life support system, and missile launch control in weapon systems. Do not use the power

synchronized unit for High Safety Required Use without securing the sufficient safety level required. If you

wish to use the power synchronized unit for High Safety Required Use, please consult with our sales

representative before such use.

Preface

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide (Power Synchronized Unit)

●Traditional Chinese

●Simplified Chinese

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide (Power Synchronized Unit)

About this Manual

Organization

This manual is composed of the following six chapters:

●Chapter 1 Overview

This chapter provides overviews, features, specifications, and system configuration examples of the power

synchronized unit. The names and usage of the various components for the power synchronized unit are

also described.

●Chapter 2 Installation

This chapter describes how to install the power synchronized unit.

●Chapter 3 Powering On and Off

This chapter describes how to turn on and off the power synchronized unit.

●Chapter 4 Connection and Settings

This chapter describes the connection and setup procedures to operate the power synchronized unit.

●Chapter 5 Adding a Connecting Device

This chapter describes how to connect the power synchronized unit when a device is added.

●Chapter 6 Operation and Maintenance

This chapter describes how to change the configuration and appropriate responses for any problems that

may occur.

Read this chapter when operating or performing maintenance on the power synchronized unit, or if an

error occurs.

Refer to the manuals for each peripheral concerning details not included in this manual.

About this Manual

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide (Power Synchronized Unit)

Warning Notations

Warning signs are shown throughout this manual in order to prevent injury to the user and/or material

damage. These signs are composed of a symbol and a message describing the recommended level of caution.

The following section explains the symbols, their levels of caution, and their meanings as used in this manual.

The following symbols are used to indicate the type of warnings or cautions being described.

WARNING

This symbol indicates the possibility of serious or fatal injury if the power

synchronized unit is not used properly.

CAUTION

This symbol indicates the possibility of minor or moderate personal injury, as

well as damage to the power synchronized unit and/or to other users and their

property, if the power synchronized unit is not used properly.

This symbol indicates IMPORTANT information for the user to note when using

the power synchronized unit.

Electric Shock

The triangle emphasizes the urgency of the WARNING and CAUTION

contents. Inside the triangle and above it are details concerning the symbol

(e.g. Electric Shock).

No Disassembly

The barred "Do Not..." circle warns against certain actions.

The action which should be avoided is both illustrated inside the barred circle

and written above it (e.g. No Disassembly).

Unplug

The black "Must Do..." circle indicates actions that must be taken.

The required action is both illustrated inside the black circle and written above

it (e.g. Unplug).

About this Manual

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide (Power Synchronized Unit)

How Warnings are Presented in this Manual

A message is written beside the symbol indicating the caution level. This message is marked with a vertical

ribbon in the left margin, to distinguish this warning from ordinary descriptions.

An example is shown here.

Symbols Used in this Manual

•The following symbol is used throughout this manual:

•"ETERNUS DX/AF" refers to the ETERNUS DX60 S4/DX100 S4/DX200 S4, ETERNUS DX500 S4/DX600 S4,

ETERNUS DX60 S3/DX100 S3/DX200 S3, ETERNUS DX500 S3/DX600 S3, and ETERNUS DX8100 S3/DX8700 S3/

DX8900 S3 Hybrid Storage Systems; the ETERNUS DX60 S2/DX80 S2/DX90 S2 Disk Storage Systems; and

the ETERNUS AF250 S2/AF650 S2, ETERNUS AF250/AF650 and ETERNUS DX200F All-Flash Arrays in this

manual.

About the Latest Version of this Manual and Contact Details

The information in this manual is subject to change without notice for improvement and functionality

expansion of the power synchronized unit.

The latest version of this manual and important service and support contacts (see "Contact Fujitsu") for Fujitsu

Customer Service in your country of purchase is available at the following website:

http://www.fujitsu.com/global/support/products/computing/storage/disk/manuals/manual.html

Warning Level Indicator

Warning Type Indicator

Warning Details

•To avoid damaging the power synchronized unit, pay

attention to the following points when cleaning the power synchronized

unit.

Make sure to disconnect the power when cleaning.-

Be careful that no liquid seeps into the power synchronized unit

when using cleaners, etc.

Do not use alcohol or other solvents thinners to clean the

power synchronized unit.

Warning Layout Ribbon

Example Warning

Functions and know how which can be useful when setting up or operating the

power synchronized unit.

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide (Power Synchronized Unit)

Safety Precautions

This section describes safety precautions.

Make sure to follow the instructions described below to ensure the safe use of the power synchronized unit.

■If you detect an unusual occurrence during operation

WARNING

Do Not

•If the power cord and/or power plug is damaged, do not use the power

synchronized unit and contact your sales representative or your maintenance

engineer. Never attempt to repair the power synchronized unit by yourself. Not

doing so may cause electric shock or fire.

Unplug

•If the power synchronized unit overheats, gives off smoke or an unusual odor,

makes an unusual sound, or shakes abnormally, immediately disconnect the

power plug from the socket. After the problem has subsided, contact your

sales representative or your maintenance engineer. Never attempt to repair

the power synchronized unit by yourself. Not doing so may cause electric

shock or fire.

•If any liquids such as water or foreign objects like metal fragments get into the

power synchronized unit, immediately disconnect the power plug from the

socket. Then, contact your sales representative or your maintenance engineer.

Do not attempt to repair the power synchronized unit by yourself. Doing so

may cause electric shock or fire.

•If the power synchronized unit is dropped or covers are damaged, immediately

disconnect the power plug from the socket. Then, contact your sales

representative or your maintenance engineer. Do not attempt to repair the

power synchronized unit by yourself. Doing so may cause electric shock or fire.

Safety Precautions

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide (Power Synchronized Unit)

■Instructions for installation

WARNING

Do Not

•Do not place the power synchronized unit in an area with bad ventilation or

where anything that may cause a fire, or flammable gases are generated.

Doing so may cause a fire and damage the power synchronized unit.

•Do not place the power synchronized unit in locations subject to oil smoke,

steam, humidity and dust, or in places where the power synchronized unit

may come into contact with water. Doing so may lead to electric shock, fire,

and/or damage the power synchronized unit.

•Do not place any objects containing water such as vases and cups on or near

the power synchronized unit. Doing so may cause water to get into the power

synchronized unit and lead to electric shock, fire, and/or damage the power

synchronized unit.

•Do not place the power synchronized unit on an unstable floor. Doing so may

cause the power synchronized unit to fall, resulting in injury or damage to the

power synchronized unit.

•Do not connect power cords or any other cables to the power synchronized unit

during thunderstorms. Doing so may lead to electric shock and/or fire.

Unplug

•When the power synchronized unit is installed or moved, disconnect the power

plug from the socket. Remove all the connected cables. Watch your step during

the operation. Not doing so may damage the power cords and cause electric

shock or fire. Failure to do so may also cause the power synchronized unit to

fall and injure others.

CAUTION

Do Not

•Do not use the power synchronized unit in an area affected by corrosive gas or

in a salty environment. Doing so may cause device failure.

•Do not knock or place heavy objects on the power synchronized unit or

optional products. Doing so may cause injury or damage the power

synchronized unit.

Autres manuels pour ETERNUS DX60 S4

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Fujitsu Stockage

Fujitsu

Fujitsu GRANPOWER 5000 GP5-HDH461 Manuel utilisateur

Fujitsu

Fujitsu ETERNUS DX S2, ETERNUS DX S3, ETERNUS DX S4, ETERNUS... Manuel utilisateur

Fujitsu

Fujitsu Eternus DX80 S2 Manuel utilisateur

Fujitsu

Fujitsu ETERNUS LT140 Manuel utilisateur

Fujitsu

Fujitsu ETERNUS DX60 Manuel utilisateur

Fujitsu

Fujitsu MHX2300BT - Mobile 300 GB Hard Drive Manuel utilisateur

Fujitsu

Fujitsu ETERNUS DX100 S4 Mode d’emploi

Fujitsu

Fujitsu ETERNUS DX Disk Manuel utilisateur

Fujitsu

Fujitsu MAV2036RC - 36.7 GB Hard Drive Manuel utilisateur

Fujitsu

Fujitsu ETERNUS LT160 Manuel utilisateur

Fujitsu

Fujitsu ETERNUS DX60 S2 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY S10 Manuel utilisateur

Fujitsu

Fujitsu ETERNUS DX100 S3 Manuel utilisateur

Fujitsu

Fujitsu MHY2250BH - Mobile 250 GB Hard Drive Manuel utilisateur

Fujitsu

Fujitsu MHV2040AT - Hard Drive - 40 GB Manuel utilisateur

Fujitsu

Fujitsu MAY2036RC Product/ Manuel utilisateur

Fujitsu

Fujitsu MHS2030AT - 2.5" Notebook 30GB Drive Manuel utilisateur

Fujitsu

Fujitsu ETERNUS DX100 S3 Manuel utilisateur

Fujitsu

Fujitsu Eternus DX80 S2 Manuel utilisateur

Fujitsu

Fujitsu ETERNUS Manuel utilisateur

Fujitsu

Fujitsu M2301B Manuel utilisateur

Fujitsu

Fujitsu ETERNUS DX60 Manuel utilisateur

Fujitsu

Fujitsu MAU3147RC SERIES Manuel utilisateur

Fujitsu

Fujitsu MBA3073RC SERIES Manuel utilisateur

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

HP StorageWorks MSL2024 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

HP P9000 Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur