Fujitsu SPARC Enterprise M4000 Manuel

C120-E361-04EN

SPARC®Enterprise

M4000/M5000/M8000/M9000 Server

RCI Build Procedure

C120-E361-04EN

ABOUT THIS PRODUCT

This product is designed and manufactured for use in standard applications such as

office work, personal device, household appliance, and general industrial

applications. This product is not intended for use in nuclear-reactor control systems,

aeronautical and space systems, air traffic control systems, mass transportation

control systems, medical devices for life support, missile launch control systems or

other specialized uses in which extremely high levels of reliability are required, the

required levels of safety cannot be guaranteed, or a failure or operational error could

be life-threatening or could cause physical injury (referred to hereafter as "high-risk"

use). You shall not use this product without securing the sufficient safety required for

high-risk use. If you wish to use this product for high-risk use, please consult with

sales representatives in charge before such use.

TRADEMARK ACKNOWLEDGEMENTS

zUNIX is a registered trademark of The Open Group in the United States and other

countries, licensed exclusively through X/Open Company Limited.

zSun, Sun Microsystems, the Sun Logo, Solaris and all Solaris based marks and

logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the

U.S. and other countries, and are used under license.

zEthernet is a registered trademark of Xerox Corporation in the United States and in

certain other countries.

zAll SPARC trademarks are registered trademarks of SPARC International, Inc.

Products bearing the SPARC trademarks are based on an architecture developed by

Sun Microsystems, Inc.

zAll other product names mentioned herein are the trademarks or registered

trademarks of their respective owners.

zSystem and product names in this manual are not always noted with trademark or

registered trademark symbols(™), (®).

The contents of this manual may be revised without prior notice.

The contents of this manual shall not be disclosed in any way or reproduced in any

media without the express written permission of Fujitsu Limited.

C120-E361-04EN i

Preface

This manual explains the RCI build procedure of the SPARC Enterprise M4000/M5000/M8000/M9000 server.

This manual is intended for authorized service personnel who perform maintenance work of the server or field

engineers.

In this manual, the verification of the standalone operation of the server is assumed to have been completed. Read

this manual together with the reference manuals cited in it.

This manual explains the following:

zStructure and Contents of This Manual

zSPARC Enterprise Mx000 Servers Documentation

zText Conventions

zPrompt Notations

zSyntax of the Command Line Interface (CLI)

Structure and Contents of This Manual

This manual is organized as described below.

Chapter 1, "RCI Build Procedure"

Explains the initial build procedure of the Remote Cabinet Interface (RCI) in the installation work.

Appendix A, "Troubleshooting."

Explains how to deal with possible problems during the RCI setup.

ii C120-E361-04EN

Preface

SPARC Enterprise Mx000 Servers Documentation

The manuals listed below are provided for reference.

(a) Manuals on the Web

The latest versions of all the SPARC Enterprise Series manuals are available at the following websites:

Global Site

http://www.fujitsu.com/sparcenterprise/manual/

Japanese Site

http://primeserver.fujitsu.com/sparcenterprise/manual/

Book Titles Manual Codes

SPARC Enterprise M4000/M5000 Servers Site Planning Guide C120-H015

SPARC Enterprise M8000/M9000 Servers Site Planning Guide C120-H014

SPARC Enterprise Equipment Rack Mounting Guide C120-H016

SPARC Enterprise M4000/M5000 Servers Getting Started Guide C120-E345

SPARC Enterprise M8000/M9000 Servers Getting Started Guide C120-E323

SPARC Enterprise M4000/M5000 Servers Overview Guide C120-E346

SPARC Enterprise M8000/M9000 Servers Overview Guide C120-E324

Important Safety Information for Hardware Systems C120-E391

SPARC Enterprise M4000/M5000 Servers Safety and Compliance Guide C120-E348

SPARC Enterprise M8000/M9000 Servers Safety and Compliance Guide C120-E326

External I/O Expansion Unit Safety and Compliance Guide C120-E457

SPARC Enterprise M4000 Server Unpacking Guide C120-E349

SPARC Enterprise M5000 Server Unpacking Guide C120-E350

SPARC Enterprise M8000/M9000 Servers Unpacking Guide C120-E327

SPARC Enterprise M4000/M5000 Servers Installation Guide C120-E351

SPARC Enterprise M8000/M9000 Servers Installation Guide C120-E328

SPARC Enterprise M4000/M5000 Servers Service Manual C120-E352

SPARC Enterprise M8000/M9000 Servers Service Manual C120-E330

External I/O Expansion Unit Installation and Service Manual C120-E329

SPARC Enterprise M4000/M5000/M8000/M9000 Servers RCI Build Procedure C120-E361

SPARC Enterprise M4000/M5000/M8000/M9000 Servers Administration Guide C120-E331

SPARC Enterprise M4000/M5000/M8000/M9000 Servers XSCF User’s Guide C120-E332

SPARC Enterprise M4000/M5000/M8000/M9000 Servers XSCF Reference Manual C120-E333

SPARC Enterprise M4000/M5000/M8000/M9000 Servers Dynamic Reconfiguration

(DR) User’s Guide

C120-E335

SPARC Enterprise M4000/M5000/M8000/M9000 Servers Capacity on Demand (COD)

User’s Guide

C120-E336

SPARC Enterprise M4000/M5000/M8000/M9000 Servers RCI User’s Guide C120-E360

SPARC Enterprise M4000/M5000 Servers Product Notes Go to the Web

SPARC Enterprise M8000/M9000 Servers Product Notes Go to the Web

External I/O Expansion Unit Product Notes C120-E456

Note: Product Notes and Release Notes are available on the website only. Please check for the recent

update on your product.

C120-E361-04EN iii

Preface

(b) Documentation CD

For the Documentation CD, please contact your local sales representative.

- SPARC Enterprise M4000/M5000 Servers Documentation CD (C120-E365)

- SPARC Enterprise M8000/M9000 Servers Documentation CD (C120-E364).

Remote maintenance service

(d) Provided in system

Man page of the XSCF

(e) Solaris Operating System-related manuals

http://docs.sun.com

(f) Information on Using the RCI function

For information on using the RCI function, refer to the SPARC Enterprise M4000/M5000/M8000/M9000

Servers RCI Build Procedure (This manual) and SPARC Enterprise M4000/M5000/M8000/M9000 Servers

RCI User’s Guide provided on the website.

Text Conventions

This manual uses the following fonts and symbols to express specific types of information:

Book Titles Manual Codes

Enhanced Support Facility User's Guide for REMCS C112-B067

Note: The man page can be referenced on the XSCF Shell, and it provides the same content as the

SPARC Enterprise M4000/M5000/M8000/M9000 Servers XSCF Reference Manual.

Typeface or symbol Meaning Example

AaBbCc123 What you type, when contrasted

with on-screen computer output.

This font represents the example of

command input in the frame.

XSCF> adduser jsmith

AaBbCc123 The names of commands, files, and

directories; on-screen computer

output.

This font represents the example of

command input in the frame.

XSCF> showuser -p

User Name: jsmith

Privileges: useradm

auditadm

Italic Indicates the name of a reference manua See the XSCF User's Guide.

" " Indicates names of chapters, sections,

items, buttons, or menus

See Chapter 2, "Preparation for

Installation."

iv C120-E361-04EN

Preface

Prompt Notations

The notation used for prompts in this manual is shown below.Syntax of the Command Line Interface (CLI)

Syntax of the Command Line Interface (CLI)

The command syntax is described below.

Command syntax

The command syntax is as follows:

zA variable that requires input of a value is enclosed in < >.

zAn optional element is enclosed in [ ].

zA group of options for an optional keyword is enclosed in [ ] and delimited by |.

zA group of options for a mandatory keyword is enclosed in {} and delimited by |.

zThe command syntax is shown in a frame.

Example

Shell Prompt notation

XSCF XSCF>

C shell machine-name%

C shell superuser machine-name#

Bourne shell and Korn shell $

Bourne shell and Korn shell super-users #

OpenBoot PROM ok

XSCF> showuser -a

Autres manuels pour SPARC Enterprise M4000

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Fujitsu Serveur

Fujitsu

Fujitsu PRIMERGY RX100 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY TX120 S2 Manuel du propriétaire

Fujitsu

Fujitsu PRIMERGY CX400 M1 Guide de l'utilisateur

Fujitsu

Fujitsu FUTRO S9011 Manuel utilisateur

Fujitsu

Fujitsu SPARC Enterprise M8000 Manuel utilisateur

Fujitsu

Fujitsu PRIMEPOWER850 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY TX300 S8 Manuel utilisateur

Fujitsu

Fujitsu SPARC Enterprise T2000 Manuel de service

Fujitsu

Fujitsu PRIMERGY TX300 S5 Manuel utilisateur

Fujitsu

Fujitsu SE700 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY MX130 S1 Manuel utilisateur

Fujitsu

Fujitsu Primergy RX100 S3 Manuel utilisateur

Fujitsu

Fujitsu SPARC Enterprise T2000 Manuel de service

Fujitsu

Fujitsu PRIMERGY TX300 S7 Guide de l'utilisateur

Fujitsu

Fujitsu PRIMERGY RX200 S3 Manuel du propriétaire

Fujitsu

Fujitsu SPARC Enterprise M3000 Manuel de service

Fujitsu

Fujitsu PRIMERGY RX2520 M1 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY TX300 S7 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY BX924 S3 Manuel utilisateur

Fujitsu

Fujitsu Primergy CX250 S2 Manuel utilisateur

Fujitsu

Fujitsu Primergy TX120 Manuel utilisateur

Fujitsu

Fujitsu SPARC Enterprise M4000 Manuel de service

Fujitsu

Fujitsu PRIMERGY TX2540 M1 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY TX300 S3 Manuel du propriétaire

Manuels Serveur populaires d'autres marques

HP AlphaServer ES47 Manuel utilisateur

Dell

Dell PowerEdge R410 Manuel utilisateur

PowerNAS

PowerNAS CMA Manuel utilisateur

Supero

Supero FatTwin F617R3-FT Manuel utilisateur

MSI

MSI P1-109N-L70 Manuel utilisateur

Dell

Dell PowerEdge XE9640 Manuel

Dell

Dell PS4100 Instructions de montage

EtroVISION

EtroVISION EV3151 Manuel utilisateur

NEC

NEC Express5800/T110j Manuel utilisateur

HP ProLiant Gen9 Manuel utilisateur

Compaq

Compaq ProLiant 3000 Manuel

Dell

Dell PowerEdge 3YPMN Manuel utilisateur

iRobo

iRobo IPC2U Manuel utilisateur

Nortel

Nortel 1000 Con?guration guide Manuel utilisateur

Asus

Asus AP7500 Manuel d'utilisation et d'entretien

Avid Technology

Avid Technology AirSpeed 5000 Manuel utilisateur

HP Integrity rx2600 Guide d'installation

Milestone

Milestone Husky IVO 350T Manuel utilisateur