Fujitsu PRIMERGY RX330 S1 Manuel utilisateur

PRIMERGY RX330 S1

Server

Options Guide

Edition August 2009

Comments…Suggestions…Corrections…

The User Documentation Department would like to

know your opinion of this manual. Your feedback helps

us optimize our documentation to suit your individual

needs.

Feel free to send us your comments by e-mail to

[email protected].

Certified documentation

according to DIN EN ISO 9001:2000

To ensure a consistently high quality standard and

user-friendliness, this documentation was created to

meet the regulations of a quality management system

which complies with the requirements of the standard

DIN EN ISO 9001:2000.

cognitas. Gesellschaft für Technik-Dokumentation mbH

www.cognitas.de

Delivery subject to availability; right of technical modifications reserved.

All hardware and software names used are trademarks of their respective manufacturers.

RX330 S1 Options Guide

Contents

1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1.1 Concept and target groups . . . . . . . . . . . . . . . . . . . 5

1.2 Overview of the documentation . . . . . . . . . . . . . . . . . 5

1.3 Extensions and conversions . . . . . . . . . . . . . . . . . . 7

1.4 Notational conventions . . . . . . . . . . . . . . . . . . . . . 8

2 Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

3 Safety notes . . . . . . . . . . . . . . . . . . . . . . . . . . 11

4 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

4.1 Opening the server . . . . . . . . . . . . . . . . . . . . . . . 17

4.2 Removing the air duct . . . . . . . . . . . . . . . . . . . . . 19

5 Processors . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

5.1 Installing a second processor . . . . . . . . . . . . . . . . . 21

6 Main memory . . . . . . . . . . . . . . . . . . . . . . . . . . 29

6.1 Equipping rules . . . . . . . . . . . . . . . . . . . . . . . . . 29

6.2 Extending/replacing the main memory . . . . . . . . . . . . 30

7 Accessible drives . . . . . . . . . . . . . . . . . . . . . . . 33

7.1 Installing an accessible 5.25-inch drive . . . . . . . . . . . . 33

OptionsGuide RX330 S1

Contents

8 Expansion boards . . . . . . . . . . . . . . . . . . . . . . . . 37

8.1 Installing an expansion board . . . . . . . . . . . . . . . . . 37

8.2 Changing the riser card . . . . . . . . . . . . . . . . . . . . . 45

8.3 Installing the SAS RAID controller D2516 . . . . . . . . . . . 46

8.3.1 Assembling the SAS RAID controller D2516 . . . . . . . . . . . 46

8.3.2 Cabling SAS RAID controller . . . . . . . . . . . . . . . . . . . 50

9 Completion . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

9.1 Inserting the air duct . . . . . . . . . . . . . . . . . . . . . . 59

9.2 Closing the server . . . . . . . . . . . . . . . . . . . . . . . . 60

10 Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

10.1 Cabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

RX330 S1 Options Guide 5

1 Introduction

The PRIMERGY RX330 S1 server is an AMD-based server for small and

medium-sized networks. The PRIMERGY RX330 S1 is the perfect choice for

operational areas data centers, Internet- and application-hosting.

1.1 Concept and target groups

This Options Guide shows you how to extend and upgrade your server.

VCAUTION!

The activities described in this manual may only be performed by

technical specialists.

IThe installation and removal of the hot-plug components is described in

the Operating Manual supplied with the server.

1.2 Overview of the documentation

More information on your PRIMERGY RX330 S1 can be found in the following

documents:

– “Quick Start Hardware - PRIMERGY RX330 S1” leaflet (only included as a

printed copy)

– “Quick Start Software - Quick Installation Guide” leaflet (only included as a

printed copy)

– “Safety notes and other important information” manual

– “Warranty” manual

– “Ergonomics” manual

– “Returning used devices” manual

– “Helpdesk” leaflet

– Technical manual for the system board D2440/D2932

– “PRIMERGY RX330 S1 Server Operating Manual”

– “PRIMERGY RX330 S1 Server Options Guide”

6 OptionsGuide RX330 S1

Overview of the documentation Introduction

– “ServerView RAID Manager Operating Manual”

– “Integrated RAID for SAS User’s Guide”

– “Integrated Mirroring User’s Guide”

– “LSI SATA Software RAID User’s Guide”

– “BIOS Setup” manual

IPRIMERGY manuals are available in PDF format on the ServerView

Suite DVD 2 (ServerBooks). This DVD is part of the ServerView Suite

supplied with every server.

The PDF files of the manuals can also be downloaded free of charge

from the Internet. The overview page showing the online documentation

available on the Internet can be found using the URL:

http://manuals.fujitsu-siemens.com. The PRIMERGY server documentation

can be accessed using the Industry standard servers navigation option.

If you need a replacement copy of the ServerView Suite DVD2, send the

details of your server to the following e-mail address: Reklamat-PC-

[email protected]

Further sources of information:

– PRIMERGY Abbreviations and Glossary on the PRIMERGY

ServerView Suite DVD 2

– Manual for the monitor

– Documentation for the boards and drives

– Operating system documentation

– Information files in your operating system

RX330 S1 Options Guide 7

Introduction Extensions and conversions

1.3 Extensions and conversions

Second processor

The server can be upgraded to a so-called dual processor system. A dual

processor system needs a multi processor operating system. The second

processor must have the same type and clock rate as the first.

Extension of the main memory

Eight slots (4 banks with 2 modules) are available for the main memory. Each

memory bank can be populated with 512 Mbyte (only D2440), 1 Gbyte, 2 Gbyte

or 4 Gbyte ECC DDR 2 SDRAM memory modules.

If the memory modules are populated in pairs, each pair must consist of

identical memory modules (2-way interleaved mode).

Additional accessible drive

One 5.25-inch bay is available for accessible drives.

Expansion boards in the PCI slots

The system board offers 1x PCI-Express x8 slot.

Additional the following slots are available by a riser card:

– 1 x PCI Express x8 slot, 1 x PCI Express x4 slot and

1 x PCI-X (64 Bit / 66 MHz, ZCR) slot, or

– 1 x PCI Express x8 slot, 1 x PCI-X (64 Bit / 66 MHz) slot and

1 x PCI-X (64 Bit / 66 MHz, ZCR) slot.

8 OptionsGuide RX330 S1

Notational conventions Introduction

1.4 Notational conventions

The following notational conventions are used in this manual:

Text in italics indicates commands, menu items or software programs.

“Quotation marks” indicate names of chapters and terms that are being

emphasized.

Êdescribes activities that must be performed in the order

shown.

VCAUTION! pay particular attention to texts marked with this symbol.

Failure to observe this warning may endanger your life,

destroy the system or lead to the loss of data.

Iindicates additional information, notes and tips.

RX330 S1 Options Guide 9

2Procedure

VCAUTION!

●The actions described in this manual should only be performed by

technical specialists.

●Equipment repairs should only be performed by service personnel.

●Any unauthorized opening and improper repairs could expose the

user to risks (electric shock, energy hazards, fire hazards) and could

also damage the equipment.

●Any unauthorized opening of the device will result in the invalidation

of the warranty and exclusion from all liability.

ÊFirst of all please familiarize yourself with the safety instructions in the

section chapter “Safety notes” on page 11 et seq. .

ÊEnsure that all required manuals (see “Overview of the documentation” on

page 5) are available, printing out the PDF files if necessary. You will

definitely need the Operating Manual for the server and the Technical

Manual for the system board.

ÊShut down the server correctly, switch it off, pull out the power plug(s),

and open the server as described in the chapter “Preparation” on page 17 et

seq. .

ÊExtend or upgrade your server as described in the relevant chapter.

IThe Operating Manual for the server describes how you

install/remove the hot-plug components.

ÊClose the server, connect it to the power outlet, and switch it on as described

in the chapter “Completion” on page 59 et seq. .

ÊStart the operating system and, if necessary, configure it as required (see

the Operating Manual).

Autres manuels pour PRIMERGY RX330 S1

Table des matières

Autres manuels Fujitsu Serveur

Fujitsu

Fujitsu PRIMERGY TX150 S8 Guide de l'utilisateur

Fujitsu

Fujitsu Primergy TX300 S4 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY CX420 S1 Manuel utilisateur

Fujitsu

Fujitsu Primergy N800 Manuel utilisateur

Fujitsu

Fujitsu Primergy RX100 S5 Mode d’emploi

Fujitsu

Fujitsu PRIMERGY TX2560 M2 Manuel utilisateur

Fujitsu

Fujitsu FUTRO S5010 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY BX620 S5 Manuel utilisateur

Fujitsu

Fujitsu SPARC Enterprise M4000 Guide d'installation

Fujitsu

Fujitsu SPARC Enterprise M4000 Manuel de service

Fujitsu

Fujitsu PRIMERGY Econel 50 Manuel du propriétaire

Fujitsu

Fujitsu PRIMERGY BX900 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY CX2550 M6 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY CX2550 M1 Manuel utilisateur

Fujitsu

Fujitsu teamserver M851i Manuel utilisateur

Fujitsu

Fujitsu BS2000 SE700 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY TX600 S2 Manuel utilisateur

Fujitsu

Fujitsu BS2000 SE Series Manuel utilisateur

Fujitsu

Fujitsu primergy h250 Manuel utilisateur

Fujitsu

Fujitsu SPARC Enterprise M3000 Manuel de service

Fujitsu

Fujitsu PRIMERGY RX300 S8 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY RX2530 M1 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY TX140 S2 Manuel utilisateur

Fujitsu

Fujitsu PRIMEQUEST 2000 Series Manuel utilisateur

Manuels Serveur populaires d'autres marques

HP AlphaServer ES47 Manuel utilisateur

Dell

Dell PowerEdge R410 Manuel utilisateur

PowerNAS

PowerNAS CMA Manuel utilisateur

Supero

Supero FatTwin F617R3-FT Manuel utilisateur

MSI

MSI P1-109N-L70 Manuel utilisateur

Dell

Dell PowerEdge XE9640 Manuel

Dell

Dell PS4100 Instructions de montage

EtroVISION

EtroVISION EV3151 Manuel utilisateur

NEC

NEC Express5800/T110j Manuel utilisateur

HP ProLiant Gen9 Manuel utilisateur

Compaq

Compaq ProLiant 3000 Manuel

Dell

Dell PowerEdge 3YPMN Manuel utilisateur

iRobo

iRobo IPC2U Manuel utilisateur

Nortel

Nortel 1000 Con?guration guide Manuel utilisateur

Asus

Asus AP7500 Manuel d'utilisation et d'entretien

Avid Technology

Avid Technology AirSpeed 5000 Manuel utilisateur

HP Integrity rx2600 Guide d'installation

Milestone

Milestone Husky IVO 350T Manuel utilisateur