Fujitsu PRIMERGY CX400 M6 Manuel utilisateur

FUJITSU Server PRIMERGY CX400 M6

Server Enclosure

Upgrade and Maintenance Manual

Upgrade and Maintenance Manual - English

06/2021

Comments… Suggestions… Corrections…

The User Documentation Department would like to know your opinion of this manual. Your

feedback helps us optimize our documentation to suit your individual needs.

Feel free to send us your comments by e-mail to [email protected].

Documentation creation according to DIN EN ISO 9001:2015

To ensure a consistently high quality standard and user-friendliness, this documentation was

created to meet the regulations of a quality management system which complies with the

requirements of the standard DIN EN ISO 9001:2015.

cognitas. Gesellschaft für Technik-Dokumentation mbH www.cognitas.de

Delivery subject to availability; right of technical modifications reserved.

All hardware and software names used are trademarks of their respective manufacturers.

–The contents of this manual may be revised without prior notice.

–Fujitsu assumes no liability for damages to third party copyrights or other rights arising from

the use of any information in this manual.

–No part of this manual may be reproduced in any form without the prior written permission

of Fujitsu.

Microsoft, Windows, Windows Server, and Hyper-V are trademarks or registered trademarks of

Microsoft Corporation in the USA and other countries.

Intel and Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries

in the USA and other countries.

Before reading this manual

For your safety

This manual contains important information for safely and correctly using this

product.

Carefully read the manual before using this product. Pay particular attention to

the accompanying manual "Safety Notes and Regulations" and ensure that

these safety notes are understood before using the product. Keep this manual

and the "Safety Notes and Regulations" manual in a safe place for easy

reference while using this product.

Radio interference

This product is a "Class A" ITE (Information Technology Equipment). In a

domestic environment this product may cause radio interference, in which case

the user may be required to take appropriate measures.

VCCI-A

Aluminum electrolytic capacitors

The aluminum electrolytic capacitors used in the printed circuit board

assemblies of the product and in the mouse and keyboard are limited-life

components. Use of these components beyond their operating life may result

in electrolyte leakage or depletion, potentially causing emission of foul odor or

smoke.

As a guideline, in a normal office environment (25 °C) operating life is not

expected to be reached within the maintenance support period (5 years).

However, operating life may be reached more quickly if, for example, the

product is used in a hot environment. The customer shall bear the cost of

replacing replaceable components which have exceeded their operating life.

Note that these are only guidelines, and do not constitute a guarantee of

trouble-free operation during the maintenance support period.

High safety use

This product has been designed and manufactured to be used in commercial

and/or industrial areas as a server.

CX400 M6 Upgrade and Maintenance Manual

The product is not suitable for use at visual display workplaces according to §2

of the Workplace Regulations (applies to all server systems except TX server

systems).

When used as visual display workplace, it must not be placed in the direct field

of view to avoid incommoding reflections (applies only to TX server systems).

The device has not been designed or manufactured for uses which demand an

extremely high level of safety and carry a direct and serious risk of life or body

if such safety cannot be assured.

These uses include control of nuclear reactions in nuclear power plants,

automatic airplane flight control, air traffic control, traffic control in mass

transport systems, medical devices for life support, and missile guidance

control in weapons systems (hereafter, "high safety use"). Customers should

not use this product for high safety use unless measures are in place for

ensuring the level of safety demanded of such use. Please consult the sales

staff of Fujitsu if intending to use this product for high safety use.

Measures against momentary voltage drop

This product may be affected by a momentary voltage drop in the power supply

caused by lightning. To prevent a momentary voltage drop, the use of an

uninterruptible power supply is recommended.

(This notice follows the guidelines of Voltage Dip Immunity of Personal

Computer issued by JEITA, the Japan Electronics and Information Technology

Industries Association.)

Technology controlled by the Foreign Exchange and Foreign Trade

Control Law of Japan

Documents produced by Fujitsu may contain technology controlled by the

Foreign Exchange and Foreign Trade Control Law of Japan. Documents which

contain such technology should not be exported from Japan or transferred to

non-residents of Japan without first obtaining authorization in accordance with

the above law.

Harmonic Current Standards

This product conforms to harmonic current standard JIS C 61000-3-2.

Upgrade and Maintenance Manual CX400 M6

Only for Japan: About SATA HDDs

The SATA version of this server supports HDDs with SATA/BC-SATA storage

interfaces. Please note that the usage and operation conditions differ

depending on the type of HDD used.

For more information on the usage and operation conditions of each available

type of HDD, see the following internet address:

https://jp.fujitsu.com/platform/server/primergy/harddisk/

Only for Japan:

Shielded LAN cables should be used in this product.

UK Importer information

Fujitsu Services Limited

22 Baker Street, London, W1U 3BW, United Kingdom

CX400 M6 Upgrade and Maintenance Manual

Version history

Issue

number

Issue date Description

V 1.0 11/2020 Early release

V 2.0 06/2021 General release

Upgrade and Maintenance Manual CX400 M6

Content

1 Introduction 13

1.1 Concept and target groups of this manual 13

1.2 Notational conventions 13

2 Before you start 15

2.1 Basic information 15

2.1.1 Proceeding 15

2.1.2 Advanced Thermal Design (ATD) 15

2.1.3 Installing optional components 16

2.2 Classification of procedures 16

2.2.1 Assignment of unit categories 16

2.2.2 Customer Replaceable Units (CRU) 17

2.2.3 Upgrade and Repair Units (URU) 17

2.2.4 Field Replaceable Units (FRU) 18

2.3 Average task duration 19

2.4 Tools you need at hand 20

2.5 Documentation overview 21

2.5.1 About availability of manuals 21

2.5.2 List of documents 21

2.5.3 Further documents 23

3 Important information 25

3.1 Introduction 25

3.2 Safety instructions 25

3.2.1 Basic safety instructions 25

3.2.2 Before starting up 26

CX400 M6 Upgrade and Maintenance Manual

3.2.3 Installation and operation 26

3.2.4 Batteries 29

3.2.5 Working with optical disk drives (ODDs) and media 30

3.2.6 Laser information 32

3.2.7 Modules with Electrostatic-Sensitive Devices (ESD modules) 32

3.2.8 Transporting the server enclosure 33

3.2.9 Installing the server enclosure in the rack 34

3.2.10 Other important information 34

3.3 ENERGY STAR 35

3.4 CE conformity 35

3.5 FCC Class A Compliance Statement 36

3.6 Environmental protection 37

4 Basic hardware procedures 39

4.1 Using diagnostic information 39

4.1.1 Proceeding 39

4.1.2 Locating the defective server 39

4.1.3 Determining the error class 40

4.1.4 Locating the defective component 40

4.2 Shutting down the server 41

4.3 Disconnecting the power cord 42

4.4 Removing server nodes from the server enclosure 43

4.5 Removing the server node dummy module 45

4.6 Installing or removing the front bezel 46

4.7 Getting access to the component 49

4.7.1 Safety notes 49

4.7.2 Extending the server enclosure out of the rack 49

4.7.3 Removing the server enclosure from the rack 50

4.7.4 Removing the top covers 54

Content

Upgrade and Maintenance Manual CX400 M6

4.8 Reassembling 56

4.8.1 Installing the top covers 56

4.8.2 Installing the rack rails 59

4.8.3 Installing the server enclosure in the rack 64

4.8.4 Sliding the server enclosure into the rack 68

4.8.5 Installing the cable management arm (CMA) 70

4.9 Installing the server node dummy module 80

4.10 Installing server nodes in the server enclosure 81

4.11 Connecting the power cord 84

4.12 Switching on the server nodes 86

5 Basic software procedures 87

5.1 Starting the maintenance task 87

5.1.1 Switching on the ID indicator 87

5.2 Completing the maintenance task 88

5.2.1 Verifying system information backup or restore 88

5.2.2 Performing a RAID array rebuild 89

5.2.3 Switching off the ID indicator 90

5.2.4 Viewing and clearing the System Event Log (SEL) 91

5.2.5 Performing a fan test 94

5.2.6 Updating Server View RAID Manager 95

5.2.7 Using the Chassis ID Prom Tool 96

6 Power supply unit (PSU) 97

6.1 Safety notes 97

6.2 Basic information 97

6.3 Replacing the hot-plug PSU 99

6.4 Removing/installing the PSU dummy module 103

Content

CX400 M6 Upgrade and Maintenance Manual

7 Hard disk drive (HDD) / solid state disk (SSD) 107

7.1 Safety notes 107

7.2 Basic information 108

7.3 Installing 2.5-inch HDD/SSD modules 112

7.4 Removing 2.5-inch HDD/SSD modules 115

7.5 Replacing a 2.5-inch HDD/SSD module 118

7.6 Replacing a 2.5-inch HDD/SSD backplane 119

7.7 Installing or removing the HDD/SSD bridge board 130

7.8 Replacing the HDD/SSD bridge board 135

7.9 Changing HDD/SSD cage bezels 139

8 Fans 145

8.1 Safety notes 145

8.2 Basic information 145

8.3 Replacing a fan module 146

9 High speed riser module 149

9.1 Safety notes 149

9.2 Basic information 149

9.3 Replacing a high speed riser module 150

10 Power distribution board 155

10.1 Safety notes 155

Content

Upgrade and Maintenance Manual CX400 M6

Table des matières

Autres manuels Fujitsu Serveur

Fujitsu

Fujitsu PRIMERGY RX200 S3 Mode d’emploi

Fujitsu

Fujitsu PRIMERGY TX200 S2 Guide rapide

Fujitsu

Fujitsu PRIMERGY BX620 S6 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY RX1330 M4 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY BX900 Manuel utilisateur

Fujitsu

Fujitsu SPARC M12 Series Manuel d'installation et d'exploitation

Fujitsu

Fujitsu PRIMERGY RX600 S6 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY RX200 S6 Manuel du propriétaire

Fujitsu

Fujitsu GP 7000F Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY RX300 S6 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY RX100 S7 Manuel utilisateur

Fujitsu

Fujitsu Primergy RX100 S3 Mode d’emploi

Fujitsu

Fujitsu PRIMERGY RX2530 M6 Manuel utilisateur

Fujitsu

Fujitsu SPARC Enterprise M4000 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY TX1320 M4 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY TX300 Manuel utilisateur

Fujitsu

Fujitsu primergy TX150 Manuel utilisateur

Fujitsu

Fujitsu FUTRO S930 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY TX150 S6 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY TX200 S5 Manuel utilisateur

Fujitsu

Fujitsu BS2000 SE Series Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY RX600 S4 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY TX100 S3 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY BX600 Manuel utilisateur

Manuels Serveur populaires d'autres marques

HP AlphaServer ES47 Manuel utilisateur

Dell

Dell PowerEdge R410 Manuel utilisateur

PowerNAS

PowerNAS CMA Manuel utilisateur

Supero

Supero FatTwin F617R3-FT Manuel utilisateur

MSI

MSI P1-109N-L70 Manuel utilisateur

Dell

Dell PowerEdge XE9640 Manuel

Dell

Dell PS4100 Instructions de montage

EtroVISION

EtroVISION EV3151 Manuel utilisateur

NEC

NEC Express5800/T110j Manuel utilisateur

HP ProLiant Gen9 Manuel utilisateur

Compaq

Compaq ProLiant 3000 Manuel

Dell

Dell PowerEdge 3YPMN Manuel utilisateur

iRobo

iRobo IPC2U Manuel utilisateur

Nortel

Nortel 1000 Con?guration guide Manuel utilisateur

Asus

Asus AP7500 Manuel d'utilisation et d'entretien

Avid Technology

Avid Technology AirSpeed 5000 Manuel utilisateur

HP Integrity rx2600 Guide d'installation

Milestone

Milestone Husky IVO 350T Manuel utilisateur