Fujitsu Primergy BX900 S2 Manuel utilisateur

Operating Manual - English

PRIMERGY BX900 S2

Blade Server

System Unit Operating Manual

Edition December 2012

Comments…Suggestions…Corrections…

The User Documentation Department would like to

know your opinion of this manual. Your feedback helps

us optimize our documentation to suit your individual

needs.

Feel free to send us your comments by e-mail to

[email protected]su.com.

Certified documentation

according to DIN EN ISO 9001:2008

To ensure a consistently high quality standard and

user-friendliness, this documentation was created to

meet the regulations of a quality management system

which complies with the requirements of the standard

DIN EN ISO 9001:2008.

cognitas. Gesellschaft für Technik-Dokumentation mbH

www.cognitas.de

Delivery subject to availability; right of technical modifications reserved.

All hardware and software names used are trademarks of their respective manufacturers.

–The contents of this manual may be revised without prior notice.

– Fujitsu assumes no liability for damages to third party copyrights or other rights arising from

the use of any information in this manual.

–No part of this manual may be reproduced in any without the prior written permission of

Fujitsu.

Microsoft, Windows, Windows Server, and Hyper V are trademarks or registered trademarks of

Microsoft Corporation in the USA and other countries.

Intel and Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries

in the USA and other countries.

BX900S2 Operating Manual

Before reading this manual

For your safety

This manual contains important information for safely and correctly using this

product.

Carefully read the manual before using this product. Pay particular attention to

the accompanying manual "Safety Notes and Regulations" and ensure these

safety notes are understood before using the product. Keep this manual and the

manual "Safety Notes and Regulations" in a safe place for easy reference while

using this product.

Radio interference

This product is a "Class A" ITE (Information Technology Equipment). In a

domestic environment this product may cause radio interference, in which case

the user may be required to take appropriate measures. VCCI-A

Aluminum electrolytic capacitors

The aluminum electrolytic capacitors used in the product's printed circuit board

assemblies and in the mouse and keyboard are limited-life components. Use of

these components beyond their operating life may result in electrolyte leakage

or depletion, potentially causing emission of foul odor or smoke.

As a guideline, in a normal office environment (25°C) operating life is not

expected to be reached within the maintenance support period (5 years).

However, operating life may be reached more quickly if, for example, the

product is used in a hot environment. The customer shall bear the cost of

replacing replaceable components which have exceeded their operating life.

Note that these are only guidelines, and do not constitute a guarantee of

trouble-free operation during the maintenance support period.

High safety use

This product has been designed and manufactured to be used in commercial

and/or industrial areas as a server.

When used as visual display workplace, it must not be placed in the direct field

of view to avoid incommoding reflections (applies only to TX server systems).

The device has not been designed or manufactured for uses which demand an

extremely high level of safety and carry a direct and serious risk of life or body

if such safety cannot be assured.

Operating Manual BX900S2

These uses include control of nuclear reactions in nuclear power plants,

automatic airplane flight control, air traffic control, traffic control in mass

transport systems, medical devices for life support, and missile guidance

control in weapons systems (hereafter, "high safety use"). Customers should

not use this product for high safety use unless measures are in place for

ensuring the level of safety demanded of such use. Please consult the sales

staff of Fujitsu if intending to use this product for high safety use.

Measures against momentary voltage drop

This product may be affected by a momentary voltage drop in the power supply

caused by lightning. To prevent a momentary voltage drop, use of an AC

uninterruptible power supply is recommended.

(This notice follows the guidelines of Voltage Dip Immunity of Personal

Computer issued by JEITA, the Japan Electronics and Information Technology

Industries Association.)

Technology controlled by the Foreign Exchange and Foreign Trade

Control Law of Japan

Documents produced by Fujitsu may contain technology controlled by the

Foreign Exchange and Foreign Trade Control Law of Japan. Documents which

contain such technology should not be exported from Japan or transferred to

non-residents of Japan without first obtaining authorization in accordance with

the above law.

Harmonic Current Standards

This product conforms to harmonic current standard JIS C 61000-3-2.

Only for the Japanese market:

IAlthough described in this manual, some sections do not apply to the

Japanese market. These options and routines include:

– CSS (Customer Self Service)

BX900S2 Operating Manual

Contents

1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

1.1 Concept and target groups for this manual . . . . . . . . . . 7

1.2 Documentation overview . . . . . . . . . . . . . . . . . . . . 8

1.3 Notational conventions . . . . . . . . . . . . . . . . . . . . 10

2 Functional overview . . . . . . . . . . . . . . . . . . . . . . 11

2.1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

2.2 System unit specification . . . . . . . . . . . . . . . . . . . 29

3 Installation steps, overview . . . . . . . . . . . . . . . . . . 33

4 Important information . . . . . . . . . . . . . . . . . . . . . 35

4.1 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . 35

4.2 CE conformity . . . . . . . . . . . . . . . . . . . . . . . . . 43

4.3 FCC Class A Compliance Statement . . . . . . . . . . . . . 43

4.4 Environmental protection . . . . . . . . . . . . . . . . . . . 45

5 Hardware installation . . . . . . . . . . . . . . . . . . . . . . 47

5.1 Unpacking the system unit . . . . . . . . . . . . . . . . . . 48

5.2 Installing/removing the system unit . . . . . . . . . . . . . . 49

5.2.1 Installation in PRIMECENTER/DataCenter rack . . . . . . . . . 51

5.2.2 Installing/removing the system unit . . . . . . . . . . . . . . . 57

5.3 Connecting devices to the system unit . . . . . . . . . . . . 60

5.3.1 Cable routing . . . . . . . . . . . . . . . . . . . . . . . . . . 61

5.4 Connecting the system unit to the mains . . . . . . . . . . 61

5.4.1 Using cable ties . . . . . . . . . . . . . . . . . . . . . . . . . 64

5.5 Notes on connecting/disconnecting cables . . . . . . . . . 65

Operating Manual BX900S2

Contents

6 Starting up and operation . . . . . . . . . . . . . . . . . . . . 67

6.1 Control and display elements . . . . . . . . . . . . . . . . . 67

6.1.1 Front of system . . . . . . . . . . . . . . . . . . . . . . . . . . 67

6.1.1.1 Control elements . . . . . . . . . . . . . . . . . . . . . . . 70

6.1.1.2 LEDs on the control panel . . . . . . . . . . . . . . . . . . . 70

6.1.1.3 ID card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

6.1.2 Back of system . . . . . . . . . . . . . . . . . . . . . . . . . . 73

6.1.2.1 Control and display elements on the management blade . . . 73

6.1.2.2 Indicators on the hot-plug power supply units . . . . . . . . . 76

6.1.2.3 Indicators on the hot-plug fans . . . . . . . . . . . . . . . . 77

6.1.3 Indicators and connectors of the connection blades . . . . . . . 78

6.1.3.1 Connection Blade GbE Switch/IBP 18/6 (SB6) . . . . . . . . 78

6.1.3.2 Connection Blade GbE Switch/IBP 36/12 (SB11A) . . . . . . 79

6.1.3.3 Connection Blade GbE Switch/IBP 36/8+2 (SB11) . . . . . . 81

6.1.3.4 Connection Blade 10 GbE Switch/IBP 18/8 . . . . . . . . . . 83

6.1.3.5 Connection Blade Ethernet Pass Thru 10Gb 18/18 . . . . . . 85

6.1.3.6 Connection Blade 8Gb FC Switch 18/8 . . . . . . . . . . . . 86

6.1.3.7 Connection Blade 8Gb FC Pass Thru 18/18 . . . . . . . . . 87

6.1.3.8 Connection Blade DCB SW 10Gb 18/6+6 . . . . . . . . . . . 88

6.1.3.9 Connection Blade FEX B22F 10Gb (Cisco) . . . . . . . . . . 90

6.1.3.10 Connection Blade Infiniband Switch 40 Gb 18/18 . . . . . . 91

6.1.3.11 Connection Blade Infiniband Switch 56 Gb 18/18 FDR . . . . 92

6.1.3.12 Connection Blade SAS Switch 6 Gb 18/6 . . . . . . . . . . . 93

6.2 Switching the system unit on/off . . . . . . . . . . . . . . . . 94

6.3 Configuring management blades . . . . . . . . . . . . . . . . 96

6.4 Cleaning the system unit . . . . . . . . . . . . . . . . . . . 102

7 Property and data protection . . . . . . . . . . . . . . . . . 103

8 Troubleshooting and tips . . . . . . . . . . . . . . . . . . . 105

8.1 System power indicator does not light up . . . . . . . . . . 105

8.2 Front or back error LED flashes orange . . . . . . . . . . . 106

8.3 System switches itself off . . . . . . . . . . . . . . . . . . . 107

BX900S2 Operating Manual 7

1 Introduction

The PRIMERGY BX900 S2 system unit is a highly compact, energy-saving and

scalable server system for installation in a 19-inch rack. The BX900 S2 system

unit has space for up to 18 server and storage blades.

With its advanced infrastructure modules, the BX900 S2 system unit offers the

server blades a high level of connectivity and availability. These include hot-plug

connection blades, redundant management blades and power supply units, the

server management of the ServerView suite, Prefailure Detection and

Analyzing (PDA), and Automatic Server Reconfiguration and Restart (ASR&R).

Security functions in the BIOS-Setup of the server blades and on the system

boards protect the data on the blade server from manipulation. Additional

security is provided by the lockable rack door.

The BX900 S2 system unit takes up 10 height units (U) in the rack.

1.1 Concept and target groups for this manual

This operating manual describes how to install, set up and operate your system

unit.

This operating manual is intended for those responsible for installing the

hardware and ensuring that the system runs smoothly. It contains all the

information you need to put your PRIMERGY BX900 S2 system unit into

operation.

To understand the various expansion options, you will need to be familiar with

the fields of hardware and data transmission and you will require a basic

knowledge of the underlying operating system.

8 Operating Manual BX900S2

Introduction

1.2 Documentation overview

More information on your PRIMERGY BX900 S2 system unit can be found in

the following documents:

– "Quick Start Hardware - PRIMERGY BX900 S2 Blade Server" leaflet

"はじめにお読みください -PRIMERGY BX900 S2 Blade Server" for the

Japanese market

(only included as a printed copy)

– "Quick Start Software - Quick Installation Guide" DVD booklet

(only included with the ServerView Suite as a printed copy)

– "Safety Notes and Regulations" manual

"安全上のご注意 " for the Japanese market

– "Warranty" manual

"保証書 " for the Japanese market

– "Returning used devices" manual and "Service Desk" leaflet

"サポート＆サービス " for the Japanese market

– "PRIMERGY BX900 S2 System Unit Operating Manual"

– "PRIMERGY BX900 S2 System Unit Upgrade and Maintenance Manual"

– “PRIMERGY BX900 Blade Server Systems ServerView Management

Blade S1" User Interface Description

BX900S2 Operating Manual 9

Introduction

IPRIMERGY manuals are available in PDF format on the

ServerView Suite DVD 2. The ServerView Suite DVD 2 is part of the

ServerView Suite supplied with every server.

If you no longer have the ServerView Suite DVDs, you can obtain the

relevant current versions using the order number U15000-C289 (the

order number for the Japanese market: please refer to the configurator

of the server http://jp.fujitsu.com/platform/server/primergy/system/).

The PDF files of the manuals can also be downloaded free of charge

from the Internet. The overview page showing the online documentation

available on the Internet can be found using the URL (for EMEA market):

http://manuals.ts.fujitsu.com. The PRIMERGY server documentation can

be accessed using the Industry standard servers navigation option.

For the Japanese market:

Please refer to the following URL for the latest product manuals:

http://jp.fujitsu.com/platform/server/primergy/manual/

Before using the product, please check for additional information that

may be available under the following URL:

http://jp.fujitsu.com/platform/server/primergy/products/note/

Further sources of information:

– ServerView Suite Glossary on the ServerView Suite DVD 2

– Manual for the monitor

– Documentation for the boards and drives

– Operating system documentation

– Information files in your operating system

10 Operating Manual BX900S2

Introduction

1.3 Notational conventions

The following notational conventions are used in this manual:

Text in italics indicates commands or menu items.

"Quotation marks" indicate names of chapters and terms that are being

emphasized.

Êdescribes activities that must be performed in the order

shown.

VCAUTION! pay particular attention to texts marked with this symbol.

Failure to observe this warning may endanger your life,

destroy the system or lead to the loss of data.

Iindicates additional information, notes and tips.

Autres manuels pour Primergy BX900 S2

Table des matières

Autres manuels Fujitsu Serveur

Fujitsu

Fujitsu PRIMERGY RX300 S6 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY BX900 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY BX924 S4 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY RX2530 M6 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY TX1310 M3 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY BX924 S3 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY TX120 S3 Manuel utilisateur

Fujitsu

Fujitsu SPARC Enterprise T5440 Server Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY CX420 S1 Guide de l'utilisateur

Fujitsu

Fujitsu SPARC Enterprise T5120 Manuel technique

Fujitsu

Fujitsu PRIMERGY RX600 S3 Manuel du propriétaire

Fujitsu

Fujitsu SPARC Enterprise M4000 Guide d'installation

Fujitsu

Fujitsu PRIMERGY RX600 S4 Manuel utilisateur

Fujitsu

Fujitsu Primergy RX300 S3 Mode d’emploi

Fujitsu

Fujitsu PRIMERGY MX130 S1 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY 10/40GbE Connection Blade 18/8+2 Manuel de la liste des pièces

Fujitsu

Fujitsu B23Q8WD-G-01-J Instructions d'installation

Fujitsu

Fujitsu Primergy RX100 S3 Manuel utilisateur

Fujitsu

Fujitsu SPARC ENTERPRISE T1000 Manuel technique

Fujitsu

Fujitsu BS2000/OSD Manuel utilisateur

Fujitsu

Fujitsu primequest 2400E2 Mode d’emploi

Fujitsu

Fujitsu SPARC Enterprise M3000 Manuel utilisateur

Fujitsu

Fujitsu SPARC Enterprise M3000 Manuel de service

Fujitsu

Fujitsu PRIMERGY TX200 S2 Mode d’emploi

Manuels Serveur populaires d'autres marques

HP AlphaServer ES47 Manuel utilisateur

Dell

Dell PowerEdge R410 Manuel utilisateur

PowerNAS

PowerNAS CMA Manuel utilisateur

Supero

Supero FatTwin F617R3-FT Manuel utilisateur

MSI

MSI P1-109N-L70 Manuel utilisateur

Dell

Dell PowerEdge XE9640 Manuel

Dell

Dell PS4100 Instructions de montage

EtroVISION

EtroVISION EV3151 Manuel utilisateur

NEC

NEC Express5800/T110j Manuel utilisateur

HP ProLiant Gen9 Manuel utilisateur

Compaq

Compaq ProLiant 3000 Manuel

Dell

Dell PowerEdge 3YPMN Manuel utilisateur

iRobo

iRobo IPC2U Manuel utilisateur

Nortel

Nortel 1000 Con?guration guide Manuel utilisateur

Asus

Asus AP7500 Manuel d'utilisation et d'entretien

Avid Technology

Avid Technology AirSpeed 5000 Manuel utilisateur

HP Integrity rx2600 Guide d'installation

Milestone

Milestone Husky IVO 350T Manuel utilisateur