Fujitsu M3096EX Manuel

M3096EX AND M3096GX

IMAGE SCANNER

OPERATOR’S GUIDE

C150-E009-07EN

Date published

June, 1994

August, 1994

Janualy, 1995

April, 1995

September, 1995

January, 1996

August, 1996

The contents of this manual is subject to change

without prior notice.

Edition

Specification No.: C150-E009-07EN

ThisdigitalapparatusdoesnotexceedtheClassAlimitforradionoiseemissionsfromdigitalapparatussetoutintheRadio

interference Regulations of the Canadian Department of Communications.

Le présent appareil numérique n’ément pas de bruits radioélectriques dépassant les limites applicables aux appareils

numériques de la classe A prescridtes dans le Réglesment sur le brouillage radioélectrique édicté par le ministere des

Communications du Canada.

Maschinenlärmlnformationsverordnung 3. GSGV, 18.01.1991:Der arbeisplatzbezogene Schalldruckpegel beträgt 70

dB(A)oder weniger gemäß ISO 7779.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case

the user will be required to correct the interference at his own expense.

REVISION RECORD

Revised contents

First edition

Contents revised

Pick Roller replacement procedure added

Pad replacement procedure added

Appendix C, Declaration of Conformity added

Declaration of Conformity revised

Conventions Special information, such as warnings, cautions are indicated as

follows:

WARNING

A WARNING indicates that personal injury may result if you do not

follow a procedure correctly.

CAUTION

A CAUTION indicates that damage to the scanner may result if you

do not follow a procedure correctly.

NOTICE

A NOTICE provides “how-to” tips or suggestions to help you perform

a procedure correctly. NOTEs are particularly useful for first-time

users.

iii

CONTENTS

page

CHAPTER 1 PREFACE .....................................................................................................1-1

CHAPTER 2 COMPONENTS ............................................................................................2-1

2.1 Checking the Components ..........................................................................................2-1

2.2 Part Names and Functions............................................................................................2-2

2.2.1 Exterior view of image scanner ...........................................................................2-2

2.2.2 Functions of each part..........................................................................................2-3

2.3 Indication Panel Functions (standard model)...............................................................2-4

2.3.1 Indicators .............................................................................................................2-4

2.4 Operator Panel Functions (LCD model) ......................................................................2-4

2.4.1 Indicators .............................................................................................................2-5

2.4.2 Buttons and liquid crystal display screen ............................................................2-5

2.4.3 Liquid crystal display screen ...............................................................................2-6

2.4.4 Messages ............................................................................................................2-11

CHAPTER 3 INSTALLATION AND CONNECTIONS .................................................3-1

3.1 Precautions ...................................................................................................................3-1

3.2 Removing the Carrier Fixing Bracket..........................................................................3-2

3.3 Connections..................................................................................................................3-3

3.4 Mounting the Stacker ...................................................................................................3-5

3.5 SCSI -ID Setting ..........................................................................................................3-6

CHAPTER 4 OPERATIONS ..............................................................................................4-1

4.1 Turning on the Power...................................................................................................4-1

4.2 Reading a Document in Flatbed Mode ........................................................................4-2

4.2.1 Reading a standard-size document ......................................................................4-2

4.2.2 Reading a page from a thick book .......................................................................4-3

4.2.3 Reading a document larger than the document board..........................................4-4

4.3 Reading Documents in ADF Mode..............................................................................4-5

CHAPTER 5 MAINTENANCE ..........................................................................................5-1

5.1 Removing Jammed Documents ...................................................................................5-1

5.2 Notes on Daily Use ......................................................................................................5-2

5.3 Cleaning .......................................................................................................................5-2

5.3.1 Cleaning the document cover, document holding pad, and document bed .........5-2

5.3.2 Cleaning the ADF ................................................................................................5-3

5.4 Consumables/Periodical replacement parts .................................................................5-4

5.4.1 Parts number and replacement cycle ...................................................................5-4

5.4.2 Replacing pad ASY .............................................................................................5-4

5.4.3 Replacing pick roller............................................................................................5-5

CHAPTER 6 TROUBLESHOOTING ...............................................................................6-1

APPENDIX A ..........................................................................................................................A-1

A.1 Installation Specifications ...........................................................................................A-1

A.2 External Dimensions ...................................................................................................A-2

APPENDIX B ..........................................................................................................................B-1

B.1 Test mode for maintenance .........................................................................................B-1

APPENDIX C ..........................................................................................................................C-1

C.1 Option..........................................................................................................................C-1

C.2 IPC-2/CMP-2 option board installation ......................................................................C-1

FIGURES

page

2.1 Received components ..................................................................................................2-1

2.2 M3096EX/GX parts names ..........................................................................................2-2

2.3 M3096EX/GX Indication panel ...................................................................................2-4

2.4 M3096EX (LCD model) operator panel ......................................................................2-4

3.1 SCSI-ID setting ............................................................................................................3-6

4.1 Flatbed reading.............................................................................................................4-3

4.2 Removing the document cover.....................................................................................4-4

4.3 ADF paper chute setting ..............................................................................................4-7

4.4 Loading the document..................................................................................................4-9

5.1 Removing jammed documents.....................................................................................5-1

5.2 Cleaning the document cover, document holding pad, and document bed..................5-2

5.3 Cleaning the ADF ........................................................................................................5-3

5.4 Pick Roller replacement ...............................................................................................5-5

5.5 Move the Retaining spring...........................................................................................5-6

5.6 Slide the Pick Roller ....................................................................................................5-6

5.7 Remove the Pick Roller ...............................................................................................5-6

A.1 External dimensions ....................................................................................................A-2

TABLES

page

1.1 The differences between the M3096EX and the M3096GX........................................1-1

3.1 SCSI-ID setting ............................................................................................................3-6

6.1 Check items..................................................................................................................6-1

A.1 Installation specifications............................................................................................A-1

B.1 LED at an error............................................................................................................B-2

1 – 1

Automatic

document feeder

Yes

Max. 50 pages

(A4)

CHAPTER 1 PREFACE

This manual describes how to operate the M3096EX and M3096GX image scanners. An image

scanner optically reads image information from a document and outputs the information to the

host system. The differences between the M3096EX and the M3096GX image scanners are

listed in table 1.1.

Table 1.1 The differences between the M3096EX and the M3096GX

Model number

M3096EX

LCD model 



Standerd model

*

M3096GX

(Standerd

model)

Interface

RS232C

VIDEO

SCSI2

Shipping

models

North America

Europe

North America

Europe

Image size

A3 size or

double-letter

size

*Standerd model is the model which does not have LCD on operator panel.

This manual should be read before operating the image scanner to ensure correct operation.

Note on Copyright Act

This document cannot be reproduced or copied for any use other than private without the

author’s permission.

1 – 2

This page is intentionally left blank.

2 – 1

CHAPTER 2 COMPONENTS

2.1 Checking the Components

2.2 Part Names and Functions

2.3 Indication Panel Functions

2.4 Operator Panel Functions

After unpacking image scanner, confirm that all the components have been received. This

section describes the components of the image scanner and their functions.

2.1 Checking the Components

These high precision components must be handled with care. Confirm

that all the components shown in figure 2.1 have been received. If

any component is missing, please contact your local Fujitsu sales

person.

Figure 2.1 Received components

Image scanner

One stacker and

two extensions

Operator’s Guide

(this manual)

Inspection

report

Power cable for

North America

Power cable

for Europe

Terminator

(for M3096GX)

Pads

Autres manuels pour M3096EX

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Fujitsu Scanner

Fujitsu

Fujitsu fi-4340C Guide de configuration

Fujitsu

Fujitsu S1500M - ScanSnap - Document Scanner Manuel utilisateur

Fujitsu

Fujitsu fi-6130Z Manuel utilisateur

Fujitsu

Fujitsu ScanSnap iX500 Manuel utilisateur

Fujitsu

Fujitsu ScanSnap iScanner fi-6010N Manuel

Fujitsu

Fujitsu fi-65F Manuel utilisateur

Fujitsu

Fujitsu M3091DC Manuel utilisateur

Fujitsu

Fujitsu M3096EX/GX Manuel

Fujitsu

Fujitsu fi-6240C Guide de configuration

Fujitsu

Fujitsu SCANPARTNER 600C Manuel utilisateur

Fujitsu

Fujitsu SCANPARTNER 600C Manuel utilisateur

Fujitsu

Fujitsu M3097DE Manuel utilisateur

Fujitsu

Fujitsu FI 4220C - Document Scanner Manuel

Fujitsu

Fujitsu ScanSnap fi-5110EOXM Manuel utilisateur

Fujitsu

Fujitsu PA03630-B055 Manuel utilisateur

Fujitsu

Fujitsu fi-6130Z Manuel

Fujitsu

Fujitsu fi-6800 Guide de configuration

Fujitsu

Fujitsu FI-7600 Manuel

Fujitsu

Fujitsu 5110C - fi - Document Scanner Manuel utilisateur

Fujitsu

Fujitsu M3099EX/EH Manuel d'installation et d'exploitation

Fujitsu

Fujitsu fi-5650C Guide de configuration

Fujitsu

Fujitsu fi-5110 SERIES S500 Guide de configuration

Fujitsu

Fujitsu FI-5530C2 Manuel utilisateur

Fujitsu

Fujitsu M3096E+ Manuel

Manuels Scanner populaires d'autres marques

Plustek

Plustek Scanner Manuel utilisateur

Z/I Imaging

Z/I Imaging PhotoScan 2001 Manuel utilisateur

Renkforce

Renkforce DS100-5M Manuel utilisateur

Image Access

Image Access WideTEK A2 Manuel utilisateur

Canon

Canon imageFORMULA CR-120N Manuel utilisateur

GeoSlam

GeoSlam ZEB Horizon Instructions d'installation

Kodak

Kodak i5800 Scanner Manuel utilisateur

Kodak

Kodak i7300 Manuel utilisateur

Revopoint

Revopoint POP Manuel utilisateur

Eddyfi Technologies

Eddyfi Technologies Floormap X Manuel utilisateur

Faselase

Faselase F6 Manuel utilisateur

Uniden

Uniden BC340CRS Manuel utilisateur

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Manuel utilisateur

Mustek

Mustek PageExpress 4800 Pro Manuel utilisateur

Optex

Optex 750830 Manuel utilisateur

Innova

Innova 5210 Manuel utilisateur

Visioneer

Visioneer CardReader 100 Guide de démarrage rapide

Rohde & Schwarz

Rohde & Schwarz TSME6 Manuel utilisateur