Fujitsu FI-4120C Manuel utilisateur

for Fujitsu Scanners

Cleaning and Consumable Replacement Instructions

IManualnstruction

Versitec is a division of Cranel, Inc.

fi-4120C/fi-4220C/

fi-5120C/fi-5220C

INSTRUCTION MANUAL FOR

Fujitsu -4120C/-4220C/ -5120C/-5220C

CLEANING AND CONSUMABLE

REPLACEMENT INSTRUCTIONS

Versitec 1 - 8 8 8-722-6548 w w w . versitec.com

-4220C

Versitec 1- 888 - 722 - 6548 www.versitec.com

FI-4120C/FI-4220C

TABLE OF CONTENTS

I. fi-4120C/fi-4220C Parts Replacement

Parts and Consumable Replacement Cycles

Step One: Replacing the Pad Assembly......................... 3 - 4

Step Two: Replacing the Pick Roller.................................5-7

II. fi-4120C/fi-4220C Cleaning Instructions

Parts and Consumable Cleaning Cycles

Step One: Cleaning the Exterior Surfaces and

Document Support........................................................ 8

Step Two: Cleaning the Automatic

Document Feeder .................................................. 9-10

*For the Fi-4120c & Fi-4220c.

Step Three: Cleaning the Flatbed .............................. 10 -11

*For the Fi-4220c Only.

For inquiries during any of these procedures,

contact the Versitec Customer Support Center

at 1-800-224-3475.

2Versitec 1- 888 - 722 - 6548 www.versitec.com

I. fi-4120C/fi-4220C Parts Replacement

Fire or electrical shock may occur when replacing

any of the equipment’s consumables.

Disconnect the AC adapter power plug

from the outlet.

Parts and Consumable Replacement Cycles:

Consumable Item Replacement Cycle (standard)

Pad Assembly Every 50,000 sheets or annually

Pick Roller Every 100,000 sheets or annually

NOTE:

The replacement cycle is estimated for letter size, high quality paper

(20lb, 65 kg/ ream, 75/m) and will differ depending on the type of

paper used.

NOTE:

The pick and roller counter can be reset on the host PC depending on

the operating system you are using. Check your Fujitsu scanner

operator’s guide for instructions.

Step One: Replacing the Pad Assembly

1 Clear the Automatic Document Feeder (ADF) of any documents.

Versitec 1- 888 - 722 - 6548 www.versitec.com

2Push the ADF cover release button and open the ADF cover to

the front. Be careful that the open cover does not close on

your hands during this process.

3 Remove the original pad assembly by gently pushing in the

knobs on the top of the pad assembly and then pulling it up

and out towards you.

4Install the new pad assembly by gently pushing in on the knobs

at the top of the pad assembly and attaching it to the ADF.

NOTE:

Make sure that the new pad assembly is securely installed. If it is

installed incorrectly document jamming and misfeeding will result.

5Close the ADF and press the ADF button to lock it in place.

6 Reset the pad counter if you have access to the host computer.

4Versitec 1- 888 - 722 - 6548 www.versitec.com

Step Two: Replacing the Pick Roller

1Clear the Automatic Document Feeder (ADF) of any documents.

2Remove the ADF paper tray from the scanner.

3Push the ADF cover release button and open the ADF cover to

the front. Be careful that the open cover does not close on

your hands during this process.

Versitec 1- 888 - 722 - 6548 www.versitec.com

4Remove the original pick roller from the scanner.

A) Squeeze the knobs of the sheet guide.

B) Lift up the sheet guide cover and remove.

C) Rotate the original pick roller bushing counter-clockwise.

6Versitec 1- 888 - 722 - 6548 www.versitec.com

D) Lift the original pick roller upward to free it from

the shaft.

E) Remove the pick roller from the shaft by lifting up the tab

and pushing the roller away from the retaining key towards

the end of the shaft.

5Attach the new pick roller:

A) Slip the new roller onto the shaft and align the tab with the

retaining key.

B) The new pick roller is properly attached when you hear the

roller click into place.

6Mount the new pick roller in the reverse order of the

removal procedure.

NOTE:

Make sure that the roller assembly is properly installed;

otherwise document jamming and misfeeding will result.

Versitec 1- 888 - 722 - 6548 www.versitec.com

II. fi-4120C/fi-4220C Cleaning Instructions

Fire or electrical shock may occur when cleaning

any of the equipment’s consumables. Disconnect the

AC adapter power plug from the outlet.

Step One: Cleaning the Exterior Surfaces and Document Support

1 Open the flatbed cover.

2Use a dry cloth or a cloth moistened with F1 Cleaner and gently

wipe the glass.

Key Point:

Never use an organic solvent such as paint thinner, as solvents can

damage the scanner surface finish.

NOTE:

Do not allow moisture inside the scanner during cleaning.

3Close the flatbed cover.

8Versitec 1- 888 - 722 - 6548 www.versitec.com

Step Two: Cleaning the Automatic Document Feeder

*For the Fi-4120c & Fi-4220c

1Clear the Automatic Document Feeder (ADF) of any documents.

2Push the ADF cover release button and open the ADF cover to

the front. Be careful that the open cover does not close on your

hands during this process.

3Using a soft dry cloth or a cloth moistened with F1 Cleaner,

clean the following items:

Pad Assembly: Gently wipe the pad assembly in a downward

motion. Be careful not to bend the metal pick springs.

Pick Roller Unit: Gently clean this roller. If dust or debris

becomes attached to the roller it will degrade

feed performance.

Feed Roller: Gently clean these four rollers. Dust, particles, or

toner residue on the rollers may affect paper feeding.

*** You can make the rollers rotate to facilitate cleaning the entire

roller surface by first:

A) Open the ADF cover while the operator panel reads anything

except “P” or “0”.

B) Then press and hold down the “Send” and “Scan” buttons.

Autres manuels pour FI-4120C

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Fujitsu Scanner

Fujitsu

Fujitsu Scan Snap S1300i Manuel

Fujitsu

Fujitsu ScanSnap iX1500 Guide de configuration

Fujitsu

Fujitsu ScanSnap iX500 Manuel

Fujitsu

Fujitsu FI-4120C Guide de référence

Fujitsu

Fujitsu fi-4860C Manuel utilisateur

Fujitsu

Fujitsu FI-6130 Manuel utilisateur

Fujitsu

Fujitsu fi-8190 Manuel utilisateur

Fujitsu

Fujitsu fi-6800 Guide de configuration

Fujitsu

Fujitsu FI-800R Manuel utilisateur

Fujitsu

Fujitsu FI-4990C Manuel

Fujitsu

Fujitsu FI-5900C Manuel utilisateur

Fujitsu

Fujitsu ScanSnap N1800 Manuel

Fujitsu

Fujitsu ScanSnap FI-4110EOX2 Manuel

Fujitsu

Fujitsu fi-6130Z Manuel utilisateur

Fujitsu

Fujitsu fi-7800 Manuel

Fujitsu

Fujitsu M3097G Manuel d'installation et d'exploitation

Fujitsu

Fujitsu Scan Partner 300C Manuel utilisateur

Fujitsu

Fujitsu ScanPartner 15C Manuel d'installation et d'exploitation

Fujitsu

Fujitsu C150-E146-02EN Manuel

Fujitsu

Fujitsu i-4990C Manuel

Fujitsu

Fujitsu FI-5900C Guide de configuration

Fujitsu

Fujitsu ScanPartner 620C Manuel utilisateur

Fujitsu

Fujitsu fi-6800 Manuel utilisateur

Fujitsu

Fujitsu FI-4860C2 Manuel utilisateur

Manuels Scanner populaires d'autres marques

Plustek

Plustek Scanner Manuel utilisateur

Z/I Imaging

Z/I Imaging PhotoScan 2001 Manuel utilisateur

Renkforce

Renkforce DS100-5M Manuel utilisateur

Image Access

Image Access WideTEK A2 Manuel utilisateur

Canon

Canon imageFORMULA CR-120N Manuel utilisateur

GeoSlam

GeoSlam ZEB Horizon Instructions d'installation

Kodak

Kodak i5800 Scanner Manuel utilisateur

Kodak

Kodak i7300 Manuel utilisateur

Revopoint

Revopoint POP Manuel utilisateur

Eddyfi Technologies

Eddyfi Technologies Floormap X Manuel utilisateur

Faselase

Faselase F6 Manuel utilisateur

Uniden

Uniden BC340CRS Manuel utilisateur

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Manuel utilisateur

Mustek

Mustek PageExpress 4800 Pro Manuel utilisateur

Optex

Optex 750830 Manuel utilisateur

Innova

Innova 5210 Manuel utilisateur

Visioneer

Visioneer CardReader 100 Guide de démarrage rapide

Rohde & Schwarz

Rohde & Schwarz TSME6 Manuel utilisateur