Fujitsu FTP-624DSL113 Manuel utilisateur
FTP-624MCL303/304/FTP-624DSL113
■OVERVIEW
FTP-624MCL303/304 is a high speed, battery driven thermal
printer with a miniature cutter, printing on 2-inch wide paper
(58mm/60mm). A newly developed, long life, compact, light
weight cutter has been partnered with a FTP-624MCL
mechanism to produce this new product.
The design allows easy maintenance, head cleaning, head
replacement, and cutter replacement.
This printer is suitable for a variety of applications, such as
hand held POS terminals, measurement and medical
instruments.
A dedicated LSI (microcontroller) for driving the printer or an
interface board mounting this LSI is also available.
■HIGHLIGHTS
• Long life
Due to our proprietary cutter driving mechanism, the life of
the cutter is 300,000 cuts.
• High speed printing
It can print at 60 mm/s (480 dotlines) maximum by using
Fujitsu's unique head drive control.
• Paper auto loading function
Thermal paper can be loaded without head-up lever
operation.
• Two types of cut functions
Full and partial cut are possible.
• UL Recognized
File No. E171434
BATTERY DRIVE, MICRO LINE THERMAL PRINTER
2” TYPE MECHANISM AND INTERFACE BOARD
WITH MINIATURE CUTTER
FTP-624MCL303/304
FTP-624DSL113
FTP-624CU
1
2
FTP-624MCL303/304/FTP-624DSL113
■DESIGNATION
*1: 303 is for front paper insertion (curl path) and 304 is for rear paper insertion (straight path).
*2: Includes ANK+Kanji and Flash Memory.
Printer mechanism FTP-624MCL303/304*1
Interface board (Centronics /RS-232C) FTP624DSL113*2
LSI Micro Controller Unit FTP-624CU112
Thermal head cable FTP-624Y001
Parallel interface cable FTP-441Y201
Cables Serial interface cable FTP-624Y301
Power cables FTP-621Y401
FTP-621Y601
Part numberItem
Part number FTP-624MCL303/304
Printing method Thermal-sensitive line dot method
Dot structure 384 dots/line
Dot pitch (Horizontal) 0.125 mm (8 dots/mm)—Dot density
Dot pitch (Vertical) 0.125 mm (8 dots/mm)—Line feed pitch
Effective printing area 48 mm
Paper width (MCL303) 58 mm
Paper width (MCL304) 60 mm
Paper thickness 60 to 100 µm
Number of columns 32 columns/line (24 ×12 dot font)
480 dotlines/s (60 mm/s)
Conditions: 1 ply, printing on high sensitive thermal paper,
8 columns of “H” /line, double density 16 ×8 dot font,
room temperature, 8.5 VDC drive
JIS ANK : 128 International : 195
Character types ASCII : 31
JIS KANJI : approximately 6800
24 ×12 dots, (3.0 ×1.5 mm), 32 columns
16 ×8 dots, (2.0 ×1.0 mm), 48 columns
16 ×16 dots, (2.0 ×2.0 mm), 24 columns
24 ×24 dots, (3.0 ×3.0 mm), 16 columns
Interface Centronics / RS-232C (selectable by dip swtich)
■GENERAL SPECIFICATIONS
SpecificationsItem
Maximum printing speed
Character, dimensions (H×W), number of
characters
(Continued)
3
FTP-624MCL303/304/FTP-624DSL113
For head Voltage: 4.2-8.5 VDC
Peak current: approx. 2.6 A (conditions: room temp., 7.2 VDC, 64 dots on)
For motor Voltage: 4.2-8.5 VDC
Peak current: approx. 0.8 A (conditions: room temperature, 7.2 VDC)
For logic Voltage: 5.0 VDC ±5%
Current: 0.2 A maximum
For cutter Voltage: 5.0 VDC ±5%
Current: Approximately 5.0A (in-rush)
Approximately 1.0A (average)
Mechanism 97 (W) ×57 (D) ×38 (H) mm
Dimensions Interface board 131 (W) ×89 (D) ×24 (H) mm
Weight (Mechanism) Approximately 280 g
Mechanism Pulse durability: 1 ×108pulse/dot (using Fujitsu Takamisawa's standard
driving method)
Expected life Wear resistance: 50 km (at 25% print ratio)
Cutter 300,000 cuts minimum
Operating temperature 0 to +50°C*1
Operating humidity 20 to 85% RH (no condensation)
Storage temperature –20 to +60°C (excluding paper)
Storage humidity 5 to 95% RH (no condensation)
Head temperature By thermistor (applied energy control, abnormal temperature detection)
Detection Paper out/Mark detect By photointerrupter
Head-up By microswitch
For front insertion use (58 mm width) : FTP-020PU001, FTP-020P0104/
P0701
For rear insertion use (60 mm width) : FTP-020P0020, FTP-020P0105/
P0702
Recommended thermal sensitive paper In Europe (58 mm width) : FTP-021P0060-45
· Oji Paper : PD150R, PD160R-N, PD170R
· NIPPON Paper : TF50KS-E4,TF60KS-E,TF50KS-E
· MITSUBISHI Paper Mills : P220VBB-1, AFP-235
SpecificationsItem
(Continued)
Power
supply
Environmental
conditions
*1: Guarantee +5°C to +40°C.
4
FTP-624MCL303/304/FTP-624DSL113
■DIMENSIONS
Printer mechanism
Unit: mm
(Motor)
(Sensor)
5
FTP-624MCL303/304/FTP-624DSL113
Interface board
Unit: mm
17.0
1.6
5.0 23.6
120.7
105.4
86.4
69.9
56.7
15.233.0 71.1
105.4
120.7
130.8
5.1
5.1 5.1
5.1
CN3
CN9 CN10 CN6 CN5
CN11 CN1 CN2 CN4
5.1
CN8
39.4
39.4
78.7
88.9
5.1
5.1
5.1
Mounting height
Mounting height
4-ø3.6
6
FTP-624MCL303/304/FTP-624DSL113
■CONNECTOR PIN ASSIGNMENT FOR PRINTER MECHANISM
1. Thermal Head
Head side : B16B-PH-K-S-2.2 (J.S.T.) or equivalent
Board side : PHR-16 (J.S.T.) or equivalent
2. Motor connectors
Motor side : PHR-4 (J.S.T.) or equivalent
Board side : B4B-PH-K-S (J.S.T.) or equivalent
*1: Symbol: " " means a negative logic signal
1, 2, 3, ......................................15, 16
Motor Thermal head heat sink Head up level
Connector Pin No.
3. Sensor connectors
Sensor : PHR-5 (J.S.T.) or equivalent
Board side : B5B-PH-K-S (J.S.T.) or equivalent
7
FTP-624MCL303/304/FTP-624DSL113
■FUNCTION
metImetI
.1noitcnuftnirptseT.8noitcetedytilamronbarettuC
.2noitcetedtuorepaP.9noitcnufgnivasrewoprotoM
.3noitceteddneraenrepaP.01noitcnufnoitcetedkraM
.4noitcetedpudaeH.11noitcetedytilamronbanoitarepoUCM
.5 ytilamronbaerutarepmetdaehlamrehT
noitceted .21noitcetorpecneuqesFFO/NOrewoP
.6noitcetedesuftuo-wolB.31noitcetorptnerruc-revorotoM
.7noitcetedytilamronbaegatlovdaeH.41remiterawdraH
3. Cutter
Mech side : EHR-4 (J.S.T.) or equivalent
Board side : B4B-EH (J.S.T.) or equivalent
© 2002 Fujitsu Components America, Inc. All company and product names are trademarks or registered
trademarks of their respective owners. Rev. 06/2002
Japan
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: [email protected]
Web: www.fcl.fujitsu.com
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fax: (1-408) 745-4970
Email: [email protected]
Web: www.fcai.fujitsu.com
Europe
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: [email protected]
Web: www.fceu.fujitsu.com
Asia Pacific
Fujitsu ComponentsAsia Ltd.
102E Pasir Panjang Road
#04-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 6375-8560
Fax: (65) 6273-3021
Email: [email protected]
www.fcal.fujitsu.com
Fujitsu Components
International
Headquarter
Offices
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels Fujitsu Imprimante
Fujitsu
Fujitsu FTP-631MCL101 Manuel utilisateur
Fujitsu
Fujitsu 10 ppm Manuel utilisateur
Fujitsu
Fujitsu N7100E Manuel utilisateur
Fujitsu
Fujitsu FP-510II Manuel utilisateur
Fujitsu
Fujitsu M304X series Manuel
Fujitsu
Fujitsu FTP-628WSL210 Series Manuel utilisateur
Fujitsu
Fujitsu FTP-627USL401 Manuel utilisateur
Fujitsu
Fujitsu RX7300E Manuel utilisateur
Fujitsu
Fujitsu FTP-621DCL012 Manuel utilisateur
Fujitsu
Fujitsu TM 14ADV Manuel utilisateur
Fujitsu
Fujitsu fi-453PR Manuel
Fujitsu
Fujitsu JOYRITER Manuel utilisateur
Fujitsu
Fujitsu FTP-622MCL301 Manuel utilisateur
Fujitsu
Fujitsu DL2600 Manuel utilisateur
Fujitsu
Fujitsu VM2200 Manuel utilisateur
Fujitsu
Fujitsu FTP-624CU102 Manuel utilisateur
Fujitsu
Fujitsu DL900 Manuel utilisateur
Fujitsu
Fujitsu DL3100 Manuel utilisateur
Fujitsu
Fujitsu Impact 3650 Manuel utilisateur
Fujitsu
Fujitsu FTP-632MCL001 Manuel utilisateur
