Fujitsu FP-510II Manuel utilisateur

THERMAL PRINTER

Type name:FP-510II/FP-510

USER’S MANUAL

Fujitsu Isotec Limited

KA02072-Y904-05

1 / 125

Notes on use

All the company names and product names mentioned in this document are the

trademarks or registered trademarks of their respective companies.

This document is subject to change without notice.

Unauthorized reproduction or copying of this document, whether in part or in

whole is prohibited.

Although we have made every effort to ensure accuracy in creating this document,

if you find any discrepancies such as unclear locations or wrong or missing

descriptions, please make inquiries with the dealer where you purchased the

product.

Please be aware that we cannot be held liable in any way for the effects of

operating this product in accordance with this document or damages caused due to

negligence.

We cannot accept any responsibility for damage caused by this product being used

inappropriately, being used without following the stipulations of the manual, or

being repaired or altered by third parties other than our company or parties

specified by our company.

We also cannot be responsible where problems occur due to optional parts other

than official products or specified items or expendable items being attached.

2 / 125

How to Use This Product Safely

Using This Document

This document contains important information for using the product safely.

Carefully read and understand this manual before using the product.

After reading this manual, store it with care at a place where it can be found at any time,

such as near the product.

Using Recycled Parts

In consideration of the environment, some recycled parts have been used in this

product.

High Safety Usage of This Product

This Product is designed, developed and manufactured as contemplated for general

use, including without limitation, general office use, personal use, household use,

and ordinary industrial use, but is not designed, developed and manufactured as

contemplated for use accompanying fatal risks or dangers that, unless extremely

high safety is secured, could lead directly to death, personal injury, severe physical

damage or other loss (hereinafter "High Safety Required Use"), including without

limitation, nuclear reaction control in nuclear facility, aircraft flight control, air

traffic control, mass transport control, medical life support system, missile launch

control in weapon system. You shall not use this Product without securing the

sufficient safety required for the High Safety Required Use. If you wish to use this

Product for High Safety Required Use, please consult with our sales

representatives in charge before such use.

Export Control

This manual contains technology which is subject to the Foreign Exchange and

Foreign Trade Law of Japan. This manual should not be exported or transferred to

foreign countries in any form or method, or released to anyone other than the

residents of Japan prior to obtaining applicable license from your local government

or authorities and/or the Ministry of Economy, Trade and Industry of Japan in

accordance with the above law.

3 / 125

Warning

This is a class A product of Electromagnetic Interference (EMI)

standard. In a domestic environment this product may cause radio

interference in which case the user may be required to take adequate

measures.

For United States Users

Federal Communications Commission

Radio Frequency Interference Statement

Warning

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses and can radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his own expense

Notice

The contents of this manual may be revised without prior notice.

No part of this manual may be reproduced in any form without permission.

■About the name of this printer．

・Model name : FP-510

・Type name : FP-510II / FP-510

4 / 125

Declaration of Conformity

FCC Compliance Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause

undesired operation.

Note:

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and

used in accordance with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his own

expense.

FCC CAUTION

Changes or modifications not expressly approved by the party responsible for compliance could

void the user’s authority to operate the equipment.

RF Exposure Compliance

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled

environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has

very low levels of RF energy that are deemed to comply without testing of specific absorption

rate(SAR).

5 / 125

Canadian Compliance Statement

This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the

following two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, including interference that may cause undesired

operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts

de licence. L’exploitation est autorisée aux deux conditions suivantes :

1) l’appareil ne doit pas produire de brouillage;

2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est

susceptible d’en compromettre le fonctionnement.

Note:

This Class A digital apparatus complies with Canadian ICES-003.

Remarque concernant les utilisateurs au Canada Avertissement:

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

RF Exposure Compliance

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment

and meets RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels

of RF energy that are deemed to comply without testing of specific absorption rate (SAR).

Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées pour un

environnement non contrôlé et respecte les règles d’exposition aux fréquences radioélectriques (RF)

CNR-102 de l’IC. Cet équipement émet une énergie RF très faible qui est considérée conforme sans

évaluation du débit d’absorption spécifique (DAS).

6 / 125

Safety Precautions

Warning Marks

This document uses the following warning marks in order to ensure safe

and correct use of the product and to prevent any harm or damage to you or

to others.

Warning

Caution

Used for instructions intended

to alert the user to the risk of

death or severe injury should

the product be used improperly

without paying attention to

this mark.

Used for instructions intended to

alert the user to the risk of injury

or material damage should the

product be used improperly without

paying attention to this mark.

Graphic Symbols Used and their Meanings, with Examples

The

symbol alerts the user to warnings and

cautions. The specific meaning of the symbol is

determined by the design contained within the

triangle (

in this example, caution for electric

shock).

The

symbol alerts the user to actions that must

never be carried out (prohibited action). The

specific action that is prohibited is indicated inside

or to the side of the circle (in this example,

disassembly is prohibited).

The symbol

alerts the user to actions that

must necessarily be performed. The specific action

is indicated by the design contained within the

circle (in this example, the power plug must be

removed from the outlet).

7 / 125

Warning

Only the AC adapter specified by Fujitsu Isotec may be

used with this printer. Using any other AC adapter carries

the risk of fire and electric shock.

When connecting the drawer kick cable, do not use any

method not specified in the instruction manual. This may

result in fire or electric shock.

Do not place metals or vessels containing water, such as a

vase, flower pot or cup on the top of, or near the product, or

pour water on it.

This may result in electric shock or fire.

Do not place this product in places with high humidity, dust,

smoke or bad ventilation, or in places with fire hazards. This

may result in electric shock or fire.

When connecting the AC adapter, do not use voltages

outside the range indicated on the adapter. In addition,

void using multiple cords connected to one outlet. This

may result in electric shock or fire.

Do not insert or remove the power plug using wet hands.

This may result in electric shock or fire.

Do not scratch or tamper with the power cable.

Placing heavy objects on the power cable

, pulling it,

bending it forcibly, twisting it, or tampering with it can

damage the power cable and result in fire or electric shock.

Do not insert or drop foreign matter, such as metals or

combustible materials, into the produ

ct from its aperture.

This may result in fire or electric shock.

8 / 125

In case of emergency involving heat, smoke or acrid fumes

occurring, immediately turn off the power switch, and

remove the power plug from the outlet. Request the sales

company (or maintenance service center) for repair after

confirming the smoke has gone. Users must under no

circumstances whatsoever try to repair the product due to

the dangers involved. Using the product in the abnormal

state without taking any corrective action may r

esult in fire

or electric shock.

If any foreign matter (such as a piece of metal or water or

other liquids) enters the product, immediately turn off the

power switch and remove the power plug from the outlet.

Afterwards, contact the sales company (or maintenance

service center). This may result in fire or electric shock if no

action is taken. When the product is dropped, or if the cover

or some other part is damaged, turn off the power switch,

and remove the power plug from the outlet. Afterwards,

contact the sales company (or maintenance service center).

Using the product without take any corrective action

may result in fire or electric shock.

When inserting the power cable into the AC adapter to

connect the product, be sure to confirm that the product power

switch has been turned off. Also, when inserting it into the

outlet, confirm that the AC adapter is properly connected to

the product. Not doing so result in electric shock.

In order to prevent any hazards from the vinyl bag that

packages this product, please place it out of the reach of

children.

In case of any accident with the bag, please consult a

doctor immediately.

If any dirt is found on or around the metal pins of the power

plug, wipe it off using a dry cloth. Not doing so may result

in fire.

Do not alter the product in any way. For internal check or

repair, please request the sales company (or maintenance

service center). There are high voltage parts and sharp

parts inside which can cause electric shock or injury.

9 / 125

Caution

Do not place heavy objects on the product.

This may destroy the balance and cause the product to fall

over or down, resulting in injuries.

Do not locate the product on a place with severe vibration, or

on an unstable or inclined surface. The product may fall over

or down, resulting in injuries.

Do not leave the product in high-temperature locations, such

as directly under the sun or near a heater, for long periods of

time. High temperature may cause the cover or other parts to

be heated, deformed, or melted, and the temperature inside

the product may also rise, resulting in fire.

Do not open the cover of the print section of the device and

insert any objects including your fingers during or

immediately after use. This may result in injury or burns.

Do not touch the print head or motor during or immediately

after printing.

This may result in burns.

During printer operation, do not touch the movable parts,

such as gears or cutters. Touching movable parts may result

in injury.

Do not touch the cutter blade.

As there is a cutter at the paper exit, do not attempt to insert

your hands inside it at any time, whether or not the printer is

in operation.

Do not open the cover of the print section of the device and

touch the print head during or immediately after use., This

may result in injury or burns.

Do not touch the cutter blade.

As there is a cutter at the paper exit, do not attempt to insert

your hands inside it at any time, whether or not the printer is

in operation.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Fujitsu Imprimante

Fujitsu

Fujitsu DL1100 Mode d’emploi

Fujitsu

Fujitsu DL3300 Manuel utilisateur

Fujitsu

Fujitsu ScanPartner 15C Guide de configuration

Fujitsu

Fujitsu DL7600 Manuel utilisateur

Fujitsu

Fujitsu N7100E Manuel utilisateur

Fujitsu

Fujitsu DL700 Manuel utilisateur

Fujitsu

Fujitsu PrintPartner 10V Manuel utilisateur

Fujitsu

Fujitsu FP-1000 Manuel utilisateur

Fujitsu

Fujitsu DL5800 Manuel utilisateur

Fujitsu

Fujitsu JOYRITER Manuel utilisateur

Fujitsu

Fujitsu FTP-628WSL210A Manuel utilisateur

Fujitsu

Fujitsu FTP-641MCL101/102 Guide d'installation

Fujitsu

Fujitsu FTP-628 Series Manuel utilisateur

Fujitsu

Fujitsu FTP-641MCL351 Manuel utilisateur

Fujitsu

Fujitsu FTP-628WSL220 Series Manuel utilisateur

Fujitsu

Fujitsu RX7300 Manuel utilisateur

Fujitsu

Fujitsu SP-1120 Manuel

Fujitsu

Fujitsu DX2100 Manuel utilisateur

Fujitsu

Fujitsu DL2400 Manuel utilisateur

Fujitsu

Fujitsu PrintPartner 8000 Manuel utilisateur

Fujitsu

Fujitsu DL3700 Pro Manuel utilisateur

Fujitsu

Fujitsu DL7600 Manuel utilisateur

Fujitsu

Fujitsu DX2300 Manuel utilisateur

Fujitsu

Fujitsu DL3400 Manuel utilisateur

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur