Fujitsu FD-1000AT Manuel utilisateur
Console Drawer (FD-1000AT)
(for PC SERVER)
User’s Manual
Linux is a registered trademark or trademark of Linus Trovalds in the United States of
America and other countries.
The name and logo TurboLinux are trademarks or registered trademarks of
TurboLinux, Inc.
Caldera System and OpenLinux are trademarks or registered trademarks of Caldera
Systems Inc.
Red Hat and any trademarks or logos based on Red Hat are the trademark or
registered trademarks of Red Hat, Inc. in the United States of America and other
countries.
Other names such as product names are the registered trademarks or trademarks of
their respective companies.
All Rights Reserved, Copyright© FUJITSU COMPONENT LIMITED 2003
Declaration of Conformity Model Number : FD-1000AT series
Trade Name : CONSOLE Drawer
Responsible party : FUJITSU COMPONENT AMERICA, INC.
A
ddress : 250 East Caribbean Drive, Sunnyvale,CA94089
Telephone number : (408) 745-4900
This device complies with Part 15 of the FCC Rules. Operation Is subject to the
following two conditions : (1) this device may not cause harmful Interference,
and (2) this device must accept any Interference received, Including
Interference that ma
y
cause undesired o
p
eration.
This Product is designed, developed and manufactured as contemplated for
general use, including without limitation, general office use, personal use,
household use, and ordinary industrial use, but is not designed, developed and
manufactured as contemplated for use accompanying fatal risks or dangers
that, unless extremely high safety is secured, could lead directly to death,
personal injury, severe physical damage or other loss (hereinafter "High Safety
Required Use"), including without limitation, reaction core control in nuclear
power facilities, aircraft autopilot flight control, air traffic control, operation
control in mass transport control systems, medical instruments for life support
systems, missile launching control in weapon systems. You shall not use this
Product without securing the sufficient safety required for the High Safety
Required Use. If you wish to use this Product for High Safety Required Use,
please consult with our sales person representatives in charge before such
use.
i
Contents
PREFACE .....................................................................................................................1
Conventions .............................................................................................................1
Packing List ..............................................................................................................1
IMPORTANT NOTICES ................................................................................................3
Safety .......................................................................................................................3
Precautions..........................................................................................................3
Disposal...............................................................................................................4
Moving Console Drawer ...........................................................................................4
INSTALLATION ............................................................................................................5
Installing Guide Rails................................................................................................5
Installing Console Drawer ........................................................................................7
Installing the 4-port KVM Switch (CRT/KB Switcher) ...............................................8
CONNECTING AND REMOVING CABLES ...............................................................12
Connecting Cables .................................................................................................12
Removing Cables ...................................................................................................12
Connecting to Ports................................................................................................13
OPERATION ...............................................................................................................14
Operating the Console Drawer...............................................................................14
Adjusting the Monitor..............................................................................................17
Basic Adjustment Procedure .............................................................................18
Menu Screen Display Example .........................................................................18
Menu Description...............................................................................................19
Resolution and Refresh Rate ............................................................................20
Using a Linux Operating System............................................................................21
Keyboard Operation ...............................................................................................22
Pointing Device Operation......................................................................................22
The Hot-key and Reset Buttons .............................................................................23
Using CRT/KB Switcher .........................................................................................23
Storing Console Drawer .........................................................................................24
Cleaning Console Drawer ......................................................................................26
TECHNICAL SPECIFICATIONS ................................................................................27
ii
1
Preface
Congratulations on your purchase of the server rack mountable Console Drawer.
Using this product will greatly improve the efficiency and functionality of the
workspace around your racks. Space that was used in previous layouts can now be
used more freely due to our compact sliding module design.
The 15-inch TFT monitor has a resolution of 1024 to 768 dots with 16,770,000 colors.
Also, it is equipped with a keyboard and 2-button pointing device.
Conventions
Symbols and terminology that are used in this manual are described below.
This symbol indicates the possibility of physical damage (such as
damage to the Console Drawer) or physical injury, which may
result if by ignoring this symbol the Console Drawer is operated
incorrectly.
This logo indicates supplemental information, comments or hints.
●Text that is preceded by a number (such as 1.) indicates that the operation must
be done in the order indicated.
●Reference to important chapter titles and terminology are in brackets [ ].
Packing List
Make sure that the items in the following list were included in the shipping package.
●Console Drawer 1 ea.
●Power Cable (2 m) 1 ea.
(Not included in European configuration [FD-1000AT/E])
●Operation Manual (this manual) 1 ea.
●Warranty 1 ea.
(Make sure that the warranty includes all the required information.)
We recommend keeping the box and packing material in which the Console Drawer
was purchased. They may be required when moving it to another location.
If something is missing from the package, contact your place of purchase or a Fujitsu
maintenance person.
CAUTION
2
Please note the safety information in [Important Notices].
1. Check the package delivered and whether the Console Drawer has been damaged
when unpacking.
2. Remove the rubber stabilizer from the front left side of the Console Drawer.
The rubber stabilizer is inserted to prevent the Console Drawer
from sliding when installing or moving it. Be sure to keep it after
finishing the installation for when it needs to be used again.
Rubber stabilizer removal diagram
CAUTION
3
Important Notices
This chapter contains cautions that must be taken when operating the Console
Drawer and information related to safety. Carefully read this chapter to use the
Console Drawer correctly.
Safety
Precautions
This device adheres to the safety regulations related to information processing
equipment such as electronic office machines that are used in an office environment.
If you have any questions please contact your place of purchase or a Fujitsu
maintenance person.
●To prevent extreme bumping or shaking when moving the Console Drawer use
the original shipping container or a box similar to it.
●During installation and before using the Console Drawer, carefully read
[Installation] and the section about environmental conditions in [Technical
Specifications] to use the Console Drawer correctly.
●Moving the Console Drawer from a cold environment to the installation location
may cause condensation to occur. Before using the Console Drawer allow it to
dry out completely and to reach the ambient temperature of the installation
location.
●Make sure that the local power supply voltage is within the acceptable range of
the Console Drawer. Make sure that the rated voltage meets the specifications of
this device (Refer to [Technical Specifications] and the model plate on this
device).
●The power cable for the Console Drawer is specially certified. Do not connect it
to anyplace other than a grounded wall outlet.
●Arrange the immediate area around the Console Drawer's power socket and the
rack's power outlet so that the plug can be quickly pulled.
●Lay all the cables so that they will not be damaged. Refer to the relevant
sections in [Installation] when connecting and removing cables.
●Do not connect or remove the data transmission cables during thunderstorms.
●Do not allow foreign substances (such as necklaces or paperclips) or liquids
inside the Console Drawer.
●In an emergency (such as: damage to the housing, parts or cables; or liquid or a
foreign object has fallen into the Console Drawer) remove the power cable as
soon as possible and contact your place of purchase or a Fujitsu maintenance
person.
●Only licensed engineers can repair the Console Drawer. An unlicensed user that
opens the Console Drawer and makes incorrect repairs may cause electric
shock or fire.
●Avoid using the keyboard when in poor health or for extended periods of time.
●Always hold the connector portion and do not jerk the cables when removing
them.
●Avoid operating the Console Drawer with wet hands.
CAUTION
4
●Do not unplug connectors with wet hands.
●Do not place such unnecessary items as cups on the top of the Console Drawer.
●Do not modify or repair the Console Drawer.
●Only licensed personal can uncouple, remove or switch parts (such as
electromagnetic wave devices) which bear a warning mark (such as a lightening
bolt).
●Only the resolution and refresh rate specified in the monitor explanation in
[Technical Specifications] can be set. Doing settings other than those noted may
damage the monitor. Contact your place of purchase or a Fujitsu maintenance
person if you have any questions.
●To prevent interference it is necessary to adequately isolate the data cables
connected to peripheral equipment.
●Unplug the power plug from the grounded power outlet if there is a power
outage.
●Follow the instructions in the appropriate section in [Operation] when cleaning
the server.
●Keep this manual with the Console Drawer. If you give the Console Drawer to a
third party give them this manual also.
●Do not use the Console Drawer as a foot rest or lean against it with it drawn out.
Doing so may unbalance the rack, causing it to fall over.
Disposal
This device is manufactured with metal and plastic parts. Dispose of it according the
relevant government regulations.
Moving Console Drawer
When moving the Console Drawer to a different location, use the
box in which it was purchased or a box that protects the product
from bumping and shaking. Do not unpack the Console Drawer
until the move has been completed.
CAUTION
5
Installation
Please note the safety information in [Important Notices].
Maintain the area around the equipment when using the Console
Drawer (See [Technical Specifications] for more information).
Avoid dust, humidity and extreme temperatures. Installation may
require more than two people in some situations. Be careful not to
pinch your fingers or hands between the guide rails and the
Console Drawer.
Installing Guide Rails
Install the guide rails with the guides toward the front so that the
Console Drawer can be mounted on them. (Rear Spacers will be
at the back)
See the installing the guide rail diagram on page 6.
1. Insert the rear spacer studs of the guide rails into the holes in the rear rack pillars.
Fasten each guide rail with two screws inserted from the outside of the pillar, one
into each of the top and bottom holes of the rear spacer.
2. Extend the guide rails to reach the inside of the front rack pillar.
Fasten each guide rail in place with two screws, one into each of the top and bottom
holes of the front spacer. (Attach the guide rails inside the front/rear rack pillar so
that the guides face inwards.)
3. Install the left and right guide rails at the same height.
Refer to the enclosed manual for details on how to install additional guide rails.
CAUTION
6
Installing the Guide Rails diagram
Table des matières
Autres manuels Fujitsu Tiroir LCD
Manuels Tiroir LCD populaires d'autres marques
Acnodes
Acnodes KD 8228 Manuel utilisateur
Ameriwood
Ameriwood 9524328PCOM Manuel utilisateur
Kesseböhmer
Kesseböhmer TANDEM solo Manuel utilisateur
Crystal Image Technologies
Crystal Image Technologies RMD-151-A Series Manuel utilisateur
APW Wyott
APW Wyott Ease Extreme HDX-1-120 Manuel utilisateur
NTI
NTI RACKMUX-V17-N Manuel utilisateur
GRASS
GRASS DWD XP Manuel utilisateur
StarTech.com
StarTech.com DuraView RACKCONS1701 Manuel utilisateur
Fisher & Paykel
Fisher & Paykel IZONA CoolDrawer RB36S Manuel utilisateur
Synergy Global Technology
Synergy Global Technology LCD1U17-44 Manuel utilisateur
Acnodes
Acnodes RK 1000B Manuel utilisateur
I-Tech
I-Tech RKP115 Manuel utilisateur