Frigidaire FFMS121CQ10 Manuel utilisateur
Refer to Page 2 for table of contents.
www.frigidaire.com USA 1-866-942-1567 www.frigidaire.ca Canada 1-866-942-1567
16122000A16518 (June 2009)
All about the
Installation
of your
Split Type Room Air Conditioner
Welcome
01
Welcome to the world of
simple handling and no worries
Environmental advices
Attention!!
Thank you for choosing Frigidaire. This manual contains all of the information
required to guarantee your safety and the appropriate use of your air
conditioner.
Please read all of the instructions before using the air conditioner and keep
this manual for future reference.
We know you will enjoy your new air conditioner and thank you for choosing
our product.
We hope you will consider us for future purchases.
The packaging material used is recyclable. We
recommend that you separate plastic, paper and
cardboard and give them to recycling companies.
If you need to dispose of this appliance in the
future, do not throw it away with the rest of your
domestic garbage.
The air conditioner that you have bought may be slightly different from
the one illustrated in this manual. Please refer to the information related
to the model you have.
This air conditioner is for domestic use only. It is not recommended for
heavy commercial or industrial use.
02
Contents
Contents
01. Welcome..........................................................................................01
02. Environmental advices........................................................................01
03. Contents...........................................................................................02
04. Safety precautions.............................................................................03
05. Installation:
5.1 Choosing the installation site.................................................04
5.2 Parts list..............................................................................06
5.3 Indoor unit installation..........................................................08
5.4 Outdoor unit installation....................................................... 11
5.5 Refrigerant piping connection................................................12
5.6 Electrical work.....................................................................14
5.7 Purging the system............................................................... 18
5.8 Electrical safety....................................................................21
5.9 Gas leak check....................................................................21
5.10 Initial operation test..............................................................22
Satety precautions
03
Safety precautions
This appliance must be installed by a qualified licensed HVAC
technician in accordance with all applicable codes. All electrical
connections should be performed by a licensed electrician.
Manufacturer's warranty will be voided with failure to comply.
Incorrect Handling cound result in Serious Injury or Death!
1. Do not attempt to install the split air
conditioner by yourself.
2. This air conditioner contains no
user-serviceable parts. Always call
an authorized Frigidaire servicer
for repairs.
3. When moving the air conditioner,
always call an authorized Frigidaire
servicer for disconnection and re-
installation.
4. Do not insert fingers or place
objects into the discharge area in
the front of the indoor unit.
5. Do not insert fingers or place
objects into the discharge area in
the front of the outdoor unit.
6. Do not start or stop the air
conditioner by turning off the power
at the electrical box.
7. In the event of a malfunction (sparks,
burning smell, etc.) immediately
power off unit and call an
authorized Frigidaire servicer.
8. Do not operate the air conditioner
with wet hands.
9. Do not drink any water or
condensation that is drained from
the air conditioner.
10
.Provide occasional ventilation
during use. Do not direct airflow
at fire places or other heat related
sources as this could cause flare
ups or make units run excessively.
11. Do not climb on or place objects
on the outdoor unit.
12. Do not hang objects off the indoor
unit.
13. Do not place objects containing
water on the indoor and/or
outdoor units.
14. Turn off the air conditioner at the
power source when it will not be
used for an extended period of
time.
15. Periodically check the condition of
the outdoor unit’s installation base
for any damage.
16. Do not apply heavy pressure to
the coil fins of the indoor and/or
outdoor units.
17. Operate the indoor unit with air
filters in place.
18. Do not block or cover the intake
grille, discharge area and outlet
ports.
19. Ensure that any electrical/
electronic equipment is 36” away
from the indoor unit and outdoor
unit.
20. Do not use or store flammable
gases near the indoor and/or
outdoor units.
Choosing the installation site 04
Choosing the installation site
Installation Warnings
1. Carefully read the installation manual before beginning.
2. Follow each step as shown.
3. Observe all local, state and national electric codes. This appliance must
be installed by a qualified licensed HVAC technician in accordance with
all applicable codes. All electrical connections should be performed
by a licensed electrician. Failure to comply will result in a void of the
manufacturer's warranty.
4. Pay attention to all safety notices.
Precautions for Installation
Installation at the following sites may cause problems. If you must inevitably
install the unit at one of these sites, please consult your local distributor
beforehand:
1. Sites with machine oil.
2. Sites with a high concentration of salinity, such as coastal areas.
3. Sites with sulfuric gas, such as hot water springs.
4. Sites with high frequency equipment, such as wireless equipment, welding
machines and medical installations.
5. Sites with flammable gases or volatile material.
6. Sites with special environmental conditions.
7. Laundry rooms.
05 Choosing the installation site
Indoor Unit
1. Install unit where air flow will not
be obstructed.
2. The installation location must
support the weight of the indoor
unit.
3. The site must be easily accessible
for maintenance and replacement
of the air filter.
4. The installation location must allow
for the necessary space around the
indoor unit, as shown in the figure
1.1.
5. There should be at least 3 feet (1
meter) between the unit and radio
or television devices. It is ideal that
the unit be installed at the center of
the wall.
6. The indoor unit must be kept away
from fire, smoke and flammable
gases.
Outdoor Unit
1. The outdoor unit must be installed
at a convenient site that is not
exposed to strong winds. The site
should be dry and well ventilated.
2. The site must support the weight
of the outdoor unit and allow for
vertical installation.
3. The site must be kept away from
flammable gases.
4. The site must provide enough space
around the unit, as shown in figure
1.2.
5. Children must not be able to access
the installation site.
7. We recommend the indoor unit to
be installed as high up as possible
on the inside wall (minimum of 7
feet high), always leaving a space
of at least 6" between the top of the
indoor unit and the ceiling.
8. The installation location must
allow for the easy removal of the
connector pipe and drain hose.
9. The unit must be installed at a
location protected from direct
sunlight.
More
More
than 6"
than 6"
More
than 6"
More than
19-13/16"
More
More than
79-1/5"
More
More than
19-13/16"
than 12"
More
than 2"
than 12"
06
Figure 1.1
Figure 1.2
06
Part list
Wall Mounting Bracket
Drain Joint (Heat Pump only)
Remote Control
Self-tapping screws
(For Wall mounting Bracket)
Connecting pipe
assembly
1
1
5
5
1
1
7
6Remote Control Holder 1
Self-tapping screws (For Remote Control Holder) 2
Part list
(capacity = 12000 Btu's)
(capacity = 9000 Btu's)
capacity = 9000 Btu's
capacity = 12000 Btu's
6
72
72
Part list
07
4
3
1
Indoor unit
Outdoor
unit
5
6
Air filter
A
BC
More than
79-1/5"
More than 12"
More than
19-13/16"
More than
19-13/16"
More than 6"
More than 6"
More than 6"
2
7
6
Attention!!
1. This illustration is for explanation purposes only.
2. Copper tubes must be insulated independently.
72
72
08
Indoor unit installation
Indoor unit installation
Wall mounting brackets and dimensions
150mm/5.9in or more to ceiling
100/3.9
800/31.5
120mm/4.7in
or more to wall
Left rear side
refrigerant pipe
hole Ф65/2.6in
95/3.7 Indoor unit outline
120mm/4.7in
or more to wall
275/10.8
45/1.8
Right rear side
refrigerant pipe
hole Ф65/2.6in
Installing the Wall Mounting Bracket
Drilling the Hole
1. Install the wall mounting bracket
horizontally over the structural
parts on the wall using the spaces
indicated on the bracket, as shown
in figure 1.3.
2. In the case of tiled, concrete or
similar walls, create 13/64"
diameter holes. Place anchor
supports for the appropriate
assembly screws.
3. Install the wall mounting bracket to
1. Determine the position of the
hole for the pipes using the wall
mounting bracket and drill the
pipe hole so that it is tilted slightly
downward.
2. Always use a pipe cover with an
opening when drilling.
Wall mounting bracket
Wall
Indoor unit Outdoor unit
0.2"-0.3"
Attention!!!
Fit the wall mounting bracket and drill holes in the wall according to the
wall structure and corresponding mounting points on the wall mounting
bracket (Dimensions are in “inches” unless otherwise stated).
the wall with 5 self-tapping screws.
4. At all times securing to the wall
studs is recommended.
Figure 1.3
Indoor unit installation
09
Connective pipe and drainage installation
Fastening the Indoor Unit
Connective pipe
1. For the left-hand and right-hand
piping, remove the pipe cover from
the side panel. The pipe cover can
be kept as it may be used when
relocating the air conditioner to any
other place.
2. For the rear-right-hand and rear-
left-hand piping, install the piping
as shown in figure 1.4. Bend the
connective pipe to be laid at a
height of 1-11/16" or less from the
wall. Fix the end of the connective
pipe.
Drainage
1. Run the drain hose sloping
downward. Do not install the drain
hose as illustrated in figure 1.5.
2. When connecting extension drain
hose, insulate the connecting part
of extension drain hose with a
shield pipe, do not let the drain
hose slack.
1. Pass the piping through the hole in
the wall.
2. Put the upper claw at the back of
the indoor unit on the upper hook
of the wall mounting bracket, move
the indoor unit from side to side to
see that it is securely hooked.
piping
Pipe cover
(left)
Pipe
holder
Pipe cover
(right)
Right piping
Connective
pipe
Indoor unit
outline
Rear right
piping
Rear left
Left piping
1-11/16
"
Do not put the end
of drain hose into water.
Do not block
water flow
by a rise.
Do not block
water flow
by a rise.
Upper hook
Lower hook
Figure 1.4
Figure 1.5
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Frigidaire Climatiseur
Frigidaire
Frigidaire FAH086S1T - Through The Wall Room Air... Manuel utilisateur
Frigidaire
Frigidaire FRA083AT7 Manuel utilisateur
Frigidaire
Frigidaire FAX054P7A6 Manuel utilisateur
Frigidaire
Frigidaire CRA052XT70 Manuel utilisateur
Frigidaire
Frigidaire FRA08EZT1 Manuel utilisateur
Frigidaire
Frigidaire FRA12EZU2 Instructions d'installation
Frigidaire
Frigidaire FRA186MT2 Manuel utilisateur
Frigidaire
Frigidaire LRA18HMT20 Manuel utilisateur
Frigidaire
Frigidaire FAA052N7A Manuel utilisateur
Frigidaire
Frigidaire FAC127P1A Manuel utilisateur
Frigidaire
Frigidaire FAA065M7A1 Manuel utilisateur
Frigidaire
Frigidaire FRA084KT7 Manuel utilisateur
Frigidaire
Frigidaire FAS226N2 Manuel utilisateur
Frigidaire
Frigidaire FAA053M7A1 Guide de démarrage rapide
Frigidaire
Frigidaire FAH125P2T1 Manuel utilisateur
Frigidaire
Frigidaire Home Comfort FRA09EPT1 Instructions d'installation
Frigidaire
Frigidaire FAS225M2A2 Manuel utilisateur
Frigidaire
Frigidaire P/N 66121621 Manuel utilisateur
Frigidaire
Frigidaire FAH086J1T1 Manuel utilisateur
Frigidaire
Frigidaire FRA14EHT2 Instructions d'installation
