Fri-Jado S Manuel utilisateur
INSTALLATION MANUAL
MODEL
S- control ovens
- NOTICE -
This manual is prepared for the use of trained Service Technicians and should not be used by
those not properly qualified. If you have attended a training for this product, you may be
qualified to perform all the procedures in this manual.
This manual is not intended to be all encompassing. If you have not attended a training for
this product, you should read, in its entirety, the repair procedure you wish to perform to
determine if you have the necessary tools, instruments and skills required to perform the
procedure. Procedures for which you do not have the necessary tools, instruments and
skills should be performed by a trained technician.
Reproduction or other use of this Manual, without the express written consent of Fri-
Jado, is prohibited.
Connecting to Smart connect cloud
2
Index
Connecting to the SmartConnect cloud........................................................................................................ 3
1. SmartConnect cloud.............................................................................................................................. 3
2. Store WiFi network ............................................................................................................................... 5
3. Oven with S control............................................................................................................................... 5
4. Fri-Jado Connector app......................................................................................................................... 7
5 Getting connected ................................................................................................................................ 9
6 Instructions for using static IP address ...............................................................................................21
7 WiFi settings S controller ....................................................................................................................23
3
Connecting to the SmartConnect cloud
Smart connect cloud gives you a real-time overview of your fleet and lets you access and monitor your
equipment anytime, anywhere, and on any device. The oven connectivity is based on four separate parts
wich has to run/work all in order to be able to connect the oven and use the system.
1. Smart connect cloud
2. Store WiFi network
3. Oven with S control
4. Fri-Jado connector app
1. SmartConnect cloud
The first part is the Smart connect cloud which is a web based enviroment where you can manage Users,
devices and groups. You have also a dashboard available to monitor the ovens and perfom exports and
downloads.
To acces the Smart connect cloud you can use the folowing link:
https://smartconnect.frijado.com/
4
You need to enter your Username and Password which has been send to you by email to be able to
login. If you did not receive it please contact your local distributor or Fri-Jado.
Note: Password must contain at least 8 characters, one uppercase letter, one number, and one special
character (@$!^#*?)
The oven must be known in the SmartConnect cloud, in one of the groups you have access to. You can
type the serial number in the search bar in the “my devices” page to find it quickly.
Go to https://smartconnect.frijado.com/ , log in with your credentials (same as used for the app) and
check if the serial number is known.
5
2. Store Wi-Fi network
Make sure there is a 2.4GHz Wi-Fi network with password protection available, a 5GHz network will not
work. Keep the name and password of this Wi-Fi network at hand while connecting. The signal to the
oven should be stable and strong. Recommended RSSI reading is between -60dBm and -25dBm.
When a firewall blocks the connection make sure the following address is opened:
Frijado-prod-iot-hub.azure-devices.net
Port number; 8883
3. Oven with S control
Ovens with S control (touch screen) have an integrated Wi-Fi module to connect the oven with the store
Wi-Fi network.
Make sure the oven has the latest software version installed. (V 1.00.34 or higher) If not please update
the oven first. See service manual for instructions.
6
Activate Wi-Fi on the oven
First thing we need to do, is making it possible for the oven to communicate with your
smartphone. This is necessary to configure the wi-fi connection and to set the date, time and
location of the oven.
Switch on the oven and select the settings symbol and go to the service parameters page.
Select service, enter the service code: 4878 and confirm.
7
Scroll down to the WiFi settings and make the following settings:
•‘Wifi Smartphone’ Allowed (= smartphone connection )
•‘Wifi Cloud’ enable (= cloud connection )
4. Fri-Jado Connector app
To connect the oven to the Smart connect cloud you need a smartphone with the Fri-Jado connector
app installed. With this connector app you connect the oven to the smart Cloud and determine its
location.
Download the latest version of the Fri-Jado connector app on your smartphone and make sure you have
the credentials to log in.
You can download the latest Fri-Jado connector app version via the link below:
https://apps.gillz.net/b5640515ba
After this you can choose between an Android and a iOS app depending on the platform your
smartphone is running on.
8
Once you have downloaded the app you need to install the app on you smartphone.
Note: While using the app to connect the oven make sure mobile data is switched off on your
smartphone.
9
5 Getting connected
This guide will take you step by step trough the connecting process of the Oven to the Smart Connect
Cloud.
The 2 following signs will be used to show on which device action is required:
When you see this icon, actions are required on the oven controller.
When you see this icon, actions are required on your smartphone.
On the oven go to the Home menu select ‘settings’ and next select ‘service’.
Enter the service code: 4878 and confirm.
10
Scroll down to ‘Start Config’ and select it. A screen with the options ‘no and yes’ pops up. Push ‘yes’ to
start the configuration.
Wait approximately 10-30 seconds till the Smartphone icon shows up in the top right side
of the Oven display. The oven will switch to wi-fi access point mode now, to be able to connect
to your smartphone.
Table des matières
Autres manuels Fri-Jado Four
Fri-Jado
Fri-Jado TG50 H Manuel utilisateur
Fri-Jado
Fri-Jado BC 5-p Manuel utilisateur
Fri-Jado
Fri-Jado BC 5-p Manuel utilisateur
Fri-Jado
Fri-Jado TDR 8 p gas Manuel utilisateur
Fri-Jado
Fri-Jado TDR 7 AC Manuel utilisateur
Fri-Jado
Fri-Jado TDR 5 M Manuel utilisateur
Fri-Jado
Fri-Jado TG50 M Manuel utilisateur
Fri-Jado
Fri-Jado Deli Multisserie with Grease Separator Manuel utilisateur
Fri-Jado
Fri-Jado FJ 1000 Manuel utilisateur
Fri-Jado
Fri-Jado TDR-AC Manuel utilisateur
Fri-Jado
Fri-Jado STG5 P Manuel utilisateur
Fri-Jado
Fri-Jado Bake Star intelligent series Manuel utilisateur
Fri-Jado
Fri-Jado STG5 Manuel utilisateur
Fri-Jado
Fri-Jado TDR5 M Manuel utilisateur
Fri-Jado
Fri-Jado FJ 1000 Manuel utilisateur
Fri-Jado
Fri-Jado TG50 M Manuel utilisateur
Fri-Jado
Fri-Jado TDR 5 M Manuel utilisateur
Fri-Jado
Fri-Jado TDR 5 M Manuel utilisateur
Fri-Jado
Fri-Jado STG7 P Manuel utilisateur
Fri-Jado
Fri-Jado STG Manuel utilisateur
