Fortec Star ADVANTECH AIMB-229 Manuel utilisateur

The information contained in this document has been carefully researched and is, to the best of our

knowledge, accurate. However, we assume no liability for any product failures or damages, immediate or

consequential, resulting from the use of the information provided herein. Our products are not intended for

use in systems in which failures of product could result in personal injury. All trademarks mentioned herein

are property of their respective owners. All specifications are subject to change without notice.

Manual

ADVANTECH

AIMB-229

Mini-ITX Motherboard with AMD® Ryzen V2000 Embedded Processor

User Manual

AIMB-229

AMD V2000-series Quad Core

Mini-ITX with 2 x HDMI,

2 x DP (Type-C), 8 x USB,

6 x COM, and 12V DC-in

AIMB-229 User Manual ii

The documentation and the software included with this product are copyrighted 2022

by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right

to make improvements in the products described in this manual at any time without

notice. No part of this manual may be reproduced, copied, translated, or transmitted

in any form or by any means without the prior written permission of Advantech Co.,

Ltd. The information provided in this manual is intended to be accurate and reliable.

However, Advantech Co., Ltd. assumes no responsibility for its use, nor for any

infringements of the rights of third parties that may result from its use.

Acknowledgments

AMI is a trademark of American Megatrends Inc.

IBM and PC are trademarks of International Business Machines Corporation.

AMD V-series is trademark of AMD Corporation.

Nuvoton is a trademark of Nuvoton Technology.

All other product names or trademarks are properties of their respective owners.

Product Warranty (2 years)

Advantech warrants the original purchaser that each of its products will be free from

defects in materials and workmanship for two years from the date of purchase.

This warranty does not apply to any products that have been repaired or altered by

persons other than repair personnel authorized by Advantech, or products that have

been subject to misuse, abuse, accident, or improper installation. Advantech

assumes no liability under the terms of this warranty as a consequence of such

events.

Because of Advantech’s high quality-control standards and rigorous testing, most

customers never need to use our repair service. If an Advantech product is defective,

it will be repaired or replaced free of charge during the warranty period. For out-of-

warranty repairs, customers will be billed according to the cost of replacement mate-

rials, service time, and freight. Please consult your dealer for more details.

If you believe your product to be defective, follow the steps outlined below.

1. Collect all the information about the problem encountered. (For example, CPU

speed, Advantech products used, other hardware and software used, etc.) Note

anything abnormal and list any onscreen messages displayed when the prob-

lem occurs.

2. Call your dealer and describe the problem. Please have your manual, product,

and any helpful information readily available.

3. If your product is diagnosed as defective, obtain a return merchandise authori-

zation (RMA) number from your dealer. This allows us to process your return

more quickly.

4. Carefully pack the defective product, a completed Repair and Replacement

Order Card, and a proof of purchase date (such as a photocopy of your sales

receipt) into a shippable container. Products returned without a proof of pur-

chase date are not eligible for warranty service.

5. Write the RMA number clearly on the outside of the package and ship the pack-

age prepaid to your dealer.

Part No. 2006022900 Edition 1

Printed in China July 2022

iii AIMB-229 User Manual

A Message to the Customer

Advantech Customer Services

Every Advantech product is built to the most exacting specifications to ensure reliable

performance in the harsh and demanding conditions typical of industrial environ-

ments. Whether your new Advantech equipment is destined for the laboratory or fac-

tory floor, you can be assured that your product will provide the reliability and ease of

operation for which the name Advantech has come to be known. Your satisfaction is

our primary concern. Here is a guide to Advantech’s customer services. To ensure

you get the full benefit of our services, please follow the instructions carefully.

Technical Support

We want you to get the maximum performance from your products. So should you

run into technical difficulties, we are here to help. For the most frequently asked

questions, you can find answers in your product documentation. These answers are

normally a lot more detailed than the ones we can provide over the phone. Therefore,

please consult this manual first. If you still cannot find the answer, gather all the infor-

mation or questions that apply to your problem, and with the product close at hand,

call your dealer. Our dealers are well trained and ready to give the support you need

to get the most from your Advantech products. In fact, most problems reported are

minor and can be easily solved over the phone.

In addition, free technical support is available from Advantech engineers every busi-

ness day. We are always ready to give advice regarding application requirements or

specific information regarding the installation and operation of any of our products.

Declaration of Conformity

FCC Class B

This equipment has been tested and found to comply with the limits for a Class B dig-

ital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-

vide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. However, there is no guarantee that interfer-

ence will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one

or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

Consult the dealer or an experienced radio/TV technician for assistance.

Caution! New batteries are at risk of exploding if incorrectly installed. Do not

attempt to recharge, force open, or heat the battery. Replace the battery

only with the same or equivalent type as recommended by the manufac-

turer. Discard used batteries according to the manufacturer's instruc-

tions.

AIMB-229 User Manual iv

Memory Compatibility

Normal RAM Test Data

ECC RAM Test Data

Ordering Information

Category Speed Capacity Vendor ADVANTECH P/N ECC

DDR4 2666 4GB Advantech SQR-SD4N4G2K6SNEFB N

DDR4 2400 4GB Advantech SQR-SD4N4G2K4SNEFB N

DDR4 2666 8GB Advantech SQR-SD4N8G2K6SNBCB N

DDR4 2133 8GB Advantech AQD-SD4U8GN21-SG N

DDR4 3200 8GB Advantech AQD-SD4U8GN32-SE N

DDR4 3200 16GB Advantech SQR-SD4N16G3K2SNCB N

DDR4 2666 16GB Advantech AQD-SD4U16N26-SE N

DDR4 3200 32GB Advantech AQD-SD4U32GN32-SB N

DDR4 2666 32GB Advantech SQR-SD4N32G2K6SNME N

Category Speed Capacity Chip Vendor ADVANTECH P/N ECC

DDR4 2133 16GB Advantech AQD-SD4U16E21-SE ECC

DDR4 3200 8GB Advantech SQR-SD4N8G3K2SEBCB ECC

DDR4 3200 32GB Advantech AQD-SD4U32GE32-SB ECC

DDR4 2400 8GB Advantech AQD-SD4U8GE24-HE ECC

DDR4 2666 4GB Advantech SQR-SD4N4G2K6SEEFB ECC

DDR4 2666 32GB Advantech SQR-SD4N32G2K6SEME ECC

P/N Chipset HDMI eDP DP 1.2 GbE

LAN COM SATAIII USB3.2

Gen2

USB3.2

Gen1 USB2.0 M.2 PCIex8 TPM AMP

AIMB-

229VGG2-

00A1E

V2748

2 x

(HDMI

2.0)

(1) 2 2 6 2 4 2 2 2 1 1 1

AIMB-

229VGG2-

00A2

V2718

2 x

(HDMI

1.4)

(1) 2 2 6 2 4 2 2 2 1 1 (1)

AIMB-

229VGG2-

00A3

V2516

2 x

(HDMI

1.4)

(1) (2) 2 6 2 2 2 2 2 1 1 (1)

v AIMB-229 User Manual

Initial Inspection

Before installing the motherboard, ensure that the following items are included with

the product:

1 x AIMB-229 AMD V2000-series Quad Core Mini-ITX motherboard

1 x SATA HDD cable

1 x SATA power cable

1 x Serial port cable (1-to-1)

1 x Serial port cable (1-to-2)

1 x M.2 POST

2 x M.2 Screws

1 x I/O port bracket

1 x AIMB-229 startup manual

1 x Warranty card

If any of the above items are missing or damaged, contact your distributor or sales

representative immediately. We have carefully inspected the AIMB-229 mechanically

and electrically before shipment. The product should be free of marks and scratches

and in perfect working order upon receipt. While unpacking AIMB-229, check the

product for signs of shipping damage (for example, damaged box, scratches, or

dents). If there is damage or the product fails to meet the specifications, notify our

service department or your local sales representative immediately. Additionally,

please notify the carrier. Retain the shipping carton and packing material for inspec-

tion by the carrier. After inspection, we will make arrangements to repair or replace

the unit.

AIMB-229 User Manual vi

vii AIMB-229 User Manual

Contents

Chapter 1 General Information ............................1

1.1 Introduction ............................................................................................... 2

1.2 Features .................................................................................................... 2

1.3 Specifications ............................................................................................ 2

1.3.1 Processor...................................................................................... 2

1.3.2 Expansion ..................................................................................... 2

1.3.3 Memory ......................................................................................... 2

1.3.4 Graphics Interface......................................................................... 2

1.3.5 Ethernet Interface ......................................................................... 2

1.3.6 SATA Interface.............................................................................. 3

1.3.7 Rear I/O ........................................................................................ 3

1.3.8 Internal Connector ........................................................................ 3

1.3.9 Watchdog Timer............................................................................ 3

1.3.10 Power Requirement ...................................................................... 3

1.3.11 Environment.................................................................................. 3

1.3.12 Physical Characteristics................................................................ 3

1.4 Jumpers and Connectors .......................................................................... 4

Table 1.1: Connector/Header List................................................ 4

Table 1.2: Jumper Setting List..................................................... 5

1.4.1 Voltage Selection for LVDS1/EDP1 Connector (JEDP1).............. 6

1.4.2 CMOS Clear (JCMOS1)................................................................ 6

1.4.3 PWRBTN#/ RESET#/HDD LED/Serial Bus from HW Monitor IC/

Internal Buzzer/External Speaker Header (JFP1)......................... 6

1.4.4 Watchdog Timer Output and OBS Beep (JWDT1+ JOBS1)......... 7

1.4.5 AT/ATX Mode Selection (PSON1) ................................................ 7

1.4.6 Case Open Selection Pin Header (JCASEOP_SW1) ................... 7

1.4.7 COM1_RI# Pin RI#/5V/12V Selection (JSETCOM1_V1).............. 8

1.4.8 COM4_RI# Pin RI#/5V/12V Selection (JSETCOM4_V1).............. 8

1.4.9 CCTalk Power Voltage 5V/12V Select (JCCT_VCON1)............... 9

1.5 Jumper and Connector Locations ............................................................. 9

Figure 1.1 Jumper and Connector Locations (Top Side)............. 9

Figure 1.2 Jumper and Connector Locations (Bottom Side)...... 10

Table 1.3: Connector/Header List.............................................. 10

1.6 Board Diagram ........................................................................................ 12

Figure 1.3 AIMB-229 Board Diagram ........................................ 12

1.7 Safety Precautions .................................................................................. 12

1.8 Jumper Settings ...................................................................................... 13

1.8.1 How to Set Jumpers.................................................................... 13

1.8.2 CMOS Clear (JCMOS1).............................................................. 13

1.8.3 AT/ATX Mode Selection (PSON1) .............................................. 13

1.9 System Memory ...................................................................................... 14

1.10 Memory Installation ................................................................................. 14

Chapter 2 Connecting Peripherals ....................15

2.1 Introduction ............................................................................................. 16

2.2 USB Ports ............................................................................................... 16

2.3 DisplayPort1/2/3/4................................................................................... 17

2.4 Serial Ports (COM1 ~ COM6) ................................................................. 18

2.5 CPU Fan Connector (CPU_FAN1).......................................................... 19

2.6 System Fan Connector (SYSFAN1/2)..................................................... 19

2.7 Power Switch/HDD LED/SMBUS/Speaker Pin Header (JFP1), Power LED,

and Keyboard Lock Pin Header (JFP2) .................................................. 20

2.7.1 ATX Soft Power Switch (JFP1/PWR_SW).................................. 20

AIMB-229 User Manual viii

2.7.2 Reset (JFP1/RESET).................................................................. 20

2.7.3 HDD LED (JFP1/HDDLED) ........................................................ 20

2.7.4 External Speaker (JFP1/SPEAKER) .......................................... 20

2.8 DC Input Jack and 4-Pin ATX Connector (DCIN1) ................................. 21

2.9 SATA Signal and Power Connector (SATA1~SATA2/SATA_PWR1~2). 21

2.10 HD Analog Audio Interface (AUDIO1, AUDIO2, FPAUD1) ..................... 22

2.11 PCI-E x8 Slot (PCIEX8_1) ...................................................................... 23

2.12 Low-Voltage Differential Signaling Interface (EDP1) .............................. 23

2.13 LVDS Backlight Inverter Power Connector (INV1).................................. 24

2.14 NGFF M.2 B-Key and E-Key Connector (M2B1 & M2E1) ...................... 24

2.15 Audio Amplifier Output Connector (AMP1), BOM Optional..................... 25

2.16 General Purpose I/O Pin Header (GPIO1)............................................. 25

2.17 General Purpose I/O Pin Header (BIOS1) .............................................. 26

2.18 SPI Programming Pin Header (BIOS1_CN1) ......................................... 26

2.19 Low-Pin-Count Header (LPC1) ............................................................... 27

2.20 Case-Open Detect Connector (JCASE2)................................................ 27

2.21 CMOS Battery Connector (BAT1)........................................................... 28

2.22 DDR4 SODIMM Socket (DIMMA1, DIMMB1) ......................................... 28

Chapter 3 BIOS Operation ................................. 29

3.1 Introduction ............................................................................................. 30

3.2 BIOS Setup ............................................................................................. 30

3.2.1 Main Menu .................................................................................. 31

3.2.2 Advanced BIOS Features ........................................................... 32

3.3 Chipset Configuration Settings ............................................................... 53

3.3.1 South Bridge Configuration......................................................... 54

3.3.2 GFX Configuration ...................................................................... 56

3.3.3 North Bridge Configuration ......................................................... 57

3.3.4 Platform Misc Configuration........................................................ 57

3.4 Security Settings ..................................................................................... 58

3.5 Boot Setting ............................................................................................ 59

3.6 Save & Exit Configuration ....................................................................... 60

Chapter 4 Software and Services...................... 63

4.1 Introduction ............................................................................................. 64

4.2 Value-Added Software Services ............................................................. 64

4.2.1 Software API............................................................................... 64

4.2.2 Software Utility............................................................................ 66

Chapter 5 Chipset Software Installation Utility 67

5.1 Before Beginning .................................................................................... 68

5.2 Introduction ............................................................................................. 68

5.3 Windows 10 Driver Setup ....................................................................... 68

Chapter 6 LAN Configuration ............................ 69

6.1 Introduction ............................................................................................. 70

6.2 Features.................................................................................................. 70

6.3 Installation............................................................................................... 70

6.4 Windows 10 Driver Setup ....................................................................... 70

Appendix A I/O Pin Assignments ......................... 71

Table des matières

Autres manuels Fortec Star Carte mère

Fortec Star

Fortec Star iBASE IBR210 Manuel utilisateur

Fortec Star

Fortec Star CM1-BT1 Manuel utilisateur

Fortec Star

Fortec Star conga-PA3 Pico-ITX SBC Manuel utilisateur

Fortec Star

Fortec Star Advantech AIMB-586 Manuel utilisateur

Fortec Star

Fortec Star iBase MBB-1000 Manuel utilisateur

Fortec Star

Fortec Star congatec conga-IC175 Manuel utilisateur

Fortec Star

Fortec Star GIGAIPC QBiP-8565A Manuel utilisateur

Fortec Star

Fortec Star iBASE MB995 Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur