Formax Cut-True 29A Manuel utilisateur
Cut-True 29A & 29H
Guillotine Cutters
OPERATOR MANUAL
11/2016
3
1. GENERAL INFORMATION
This operator manual was written to enable safe operation of machine and
comfortable usage.
Please read information carefully before operating the cutter, with special notes
for safety precautions.
The operator manual must always be available to the person operating the
machine!
The cutter should be operated by one person only!
2. TRANSPORT AND STORING
2.1.Delivery conditions
The cutter will be delivered by manufacturer:
with disassembled base and optional side tables,
assemble according to drawings 1b and 1c
drawing1a. Cutter without side tables
4
drawing 1b. Assembly of side tables
1. side table left + screw M8x25 (4 pcs) + washer 8 (4 pcs)
2. side table right + screw M8x25 (4 pcs) + washer 8 (4 pcs)
3. safety curtain left + screw M8x25 (4 pcs) + washer 8 (4 pcs)+ nut M8 (4 pcs)
4. safety curtain right + screw M8x25 (4 pcs) + washer 8 (4 pcs)+ nut M8 (4 pcs)
5
drawing 1c. Machine base assembly
1. Right leg 1 pcs
2. Left leg 1 pcs
3. Bracket 1 pcs
4. Shelf 1 pcs.
5. Screw M 8x50 8 pcs
6. Screw M 5x16 4 pcs
drawing 1d. Assembled base
6
drawing 1e.
drawing 1f. Placing the cutter on the base
7
1. Transport holder 2 pcs
2. Screw M12x30 4 pcs
3. Guillotine
4. Base
5. Screw M10x16 4 pcs
The machine should be carried and placed on the base by 4 strong
persons.
Danger!
Protect power cable from damage by sharp tools, high temperature and
oil.
2.2. Cutter positioning
drawing 2. Leg adjustment
The machine doesn't need to be fixed to the ground. Correct and safe machine
positioning can be reached by the leg 1 adjustment as shown on the drawing 2.
8
Danger!
The cutter cannot be used without safety curtain!
9
3. TECHNICAL PROFILE
3.1. Intended use
The machine can be used for cutting paper, cardboard and other materials:
plastic, foil, laminate, rubber etc - mainly in printing houses, bookbinding workshops
and offices.
CAUTION! Staples or other hard materials can damage the knife blade!
3.2. Basic data
3.2.1. Technical data
chart 1.
PARAMETER Cut-True 29A / 29H
Maximum pile width (mm) 520
Maximum pile height (mm) 80
Functional depth of back part of pile (mm) 530
Narrow cut (mm)
With false clamp 40
Without
false clamp
25
Power of knife motor drive (kW) 1.5
Power of clamp motor drive (kW) 0.37
Power of backgauge motor drive (kW) 0.18
Power supply 230V
Frequency 60Hz
Power 2 kW
Fuse protection 20A
Noise level (dB) 63.9dB
Net weight(kg) 310
10
3.2.2 Exterior dimensions
Drawings 3a,3b and chart 2 show dimensions of different versions of machines.
drawing 3a. Dimensions of cutter without side tables.
11
drawing 3b. Dimensions of cutter with side tables.
chart 2.
DIMENSION
VALUE
(mm)
A
12
4
5
B 900
C
1
215
D
7
8
0
D1 876
F 400
G
1215
H 1480
H1
15
76
Autres manuels pour Cut-True 29A
2
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Formax Coupeur
Formax
Formax Cut-True 31H Manuel utilisateur
Formax
Formax Cut-True 31H Manuel utilisateur
Formax
Formax FD 574 Manuel utilisateur
Formax
Formax Cut-True 29H Manuel utilisateur
Formax
Formax FD 120 Manuel utilisateur
Formax
Formax FD 125 Manuel utilisateur
Formax
Formax FD 574 Manuel utilisateur
Formax
Formax FD 125 Manuel utilisateur
Formax
Formax Cut-True 29A Manuel du propriétaire
