Fluke Fiber OneShot PRO Manuel utilisateur

PN 3891247

March 2011

All product names are trademarks of their respective companies.

FIBER ONESHOT™PRO

Singlemode Fiber Troubleshooter

Users Manual

LIMITED WARRANTY AND LIMITATION OF LIABILITY

Fluke Networks mainframe products will be free from defects

in material and workmanship for one year from the date of

purchase. Parts, accessories, product repairs and services are

warranted for 90 days, unless otherwise stated. Ni-Cad, Ni-MH

and Li-Ion batteries, cables or other peripherals are all

considered parts or accessories. This warranty does not cover

damage from accident, neglect, misuse, alteration,

contamination, or abnormal conditions of operation or

handling. Resellers are not authorized to extend any other

warranty on Fluke Networks’ behalf.

To obtain service during the warranty period, contact your

nearest Fluke Networks authorized service center to obtain

return authorization information, then send your defective

product to that Service Center with a description of the

problem.

THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER

WARRANTIES, SUCH AS FITNESS FOR A PARTICULAR PURPOSE,

ARE EXPRESSED OR IMPLIED. FLUKE NETWORKS IS NOT LIABLE

FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL

DAMAGES OR LOSSES, ARISING FROM ANY CAUSE OR

THEORY.

Since some states or countries do not allow the exclusion or

limitation of an implied warranty or of incidental or

consequential damages, this limitation of liability may not

apply to you.

4/04

Fluke Networks

PO Box 777

Everett, WA 98206-0777

USA

SOFTWARE NOTICE

All or some portions of this file are derived from material licensed

to the University of California by American Telephone and

Telegraph Co. or Unix System Laboratories, Inc. and are

reproduced herein with the permission of UNIX System

Laboratories, Inc. Redistribution and use in source and binary

forms, with or without modification, are permitted provided that

the following conditions are met:

Redistributions of source code must retain the above copyright

notice, this list of conditions and the following disclaimer.

Redistributions in binary form must reproduce the above

disclaimer in the documentation and/or other materials

provided with the distribution.

Neither the name of the University nor the names of its

contributors may be used to endorse or promote products

derived from this software without specific prior written

permission.

THIS SOFTWARE IS PROVIDED BY THE REGENTS AND

CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED

WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE

REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,

INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR

CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,

PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF

USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER

CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN

CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE

OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS

SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH

DAMAGE.

@(#)subr_prf.c 8.3 (Berkeley) 1/21/94

Contents

Introduction .................................................................................... 1

Registering Your Product.............................................................. 1

The Fluke Networks Knowledge Base......................................... 1

Safety Information ......................................................................... 2

Battery Installation and Life.......................................................... 4

Physical Features............................................................................. 4

Settings ............................................................................................ 8

The Connector Adapter................................................................. 9

How to Clean Connectors.............................................................. 10

How to Use a Mechanical Device ............................................ 10

How to Use Swabs, Wipers, and Solvent................................ 11

About Launch and Receive Fibers ................................................ 12

How to Use the Troubleshooter................................................... 13

How to Do Tests Through Attenuators....................................... 15

Measurement Results..................................................................... 15

Memory Functions.......................................................................... 20

How to See Saved Results......................................................... 20

How to Delete Saved Results ................................................... 23

Maintenance ................................................................................... 23

Contacting Fluke Networks........................................................... 24

Options and Accessories ................................................................ 25

Specifications................................................................................... 26

FIBER ONESHOT PRO Users Manual

Introduction

The FIBER ONESHOT™PRO Singlemode Fiber Troubleshooter does

these tests to help you find incidents on singlemode fiber optic

cables:

•

Measures the length of singlemode fiber optic cables

•

Measures the distance to reflective and loss incidents

•

Measures the reflectance and loss of incidents

•

Maps the connections in singlemode fiber plants by

showing the number of incidents on the fiber and the

distance to each incident.

Registering Your Product

When you register your product with Fluke Networks you get

access to valuable information on updates, troubleshooting

procedures, and other support services.

To register online, go to www.flukenetworks.com/registration.

Or, send the registration card that came with this product to

Fluke Networks.

The Fluke Networks Knowledge Base

The Fluke Networks Knowledge Base gives answers to typical

questions about Fluke Networks products and includes

information on technology and procedures for network and

cable tests. To see the Knowledge Base, go to

www.flukenetworks.com, then click Customer Support >

Knowledge Base.

FIBER ONESHOT PRO Users Manual

Safety Information

WWarning: Class 1 Laser*

To prevent possible damage to your eyes caused by

hazardous radiation:

•

Do not look directly into optical connectors. Some

optical equipment emits invisible radiation that can

cause permanent damage to your eyes.

•

Do not turn on the troubleshooter unless a fiber is

attached to the port.

•

Do not use a magnifying device to look at the optical

outputs without the correct filter.

•

Use of controls, adjustments, or procedures that are

not in this manual can cause exposure to hazardous

radiation.

WCaution

To prevent damage to fiber connectors, to prevent

data loss, and to make sure that your test results are

as accurate as possible:

•

Do not connect APC connectors to the troubleshooter.

An APC connector will cause damage to the fiber

endface in the connector on the troubleshooter. See

Figure 3.

WWarning or Caution: Risk of damage to or destruction of

equipment or software. See explanations in the manual.

XWarning: Risk of electrical shock.

*Warning: Class 1 laser. Risk of damage to your eyes caused by

hazardous radiation.

~Do not put products that contain circuit boards into waste

containers. Refer to local regulations for disposal procedures.

Safety Information

•

Connect only UPC connectors to the troubleshooter.

Use only patch cords that comply with GR-326-CORE

specifications and have UPC connectors. Other patch

cords can cause unreliable measurements.

•

Use the correct procedures to clean all fiber connectors

before each test. If you do not do this or if you use

incorrect procedures, you can get unreliable test

results and can cause permanent damage to the

connectors.

•

Put protective caps on all connectors when you do not

use them.

•

Do not connect the troubleshooter to a network that

is on. If you do, the troubleshooter can cause problems

in the network.

•

If ACTIVE LINE blinks, immediately disconnect the

troubleshooter from the fiber. Optical power levels

more than +7 dBm can cause damage to the detector

in the troubleshooter.

•

The troubleshooter senses optical signals between

1310 nm and 1550 nm. If there might be signals at

other wavelengths on a fiber, use a different

instrument to make sure that the fiber is not active

before you connect the troubleshooter to the fiber.

FIBER ONESHOT PRO Users Manual

Battery Installation and Life

fjy03.eps

Figure 1. How to Install the Batteries

The troubleshooter can do approximately 1500 tests before you

must replace the batteries.

Physical Features

See Figure 2.

Output port with SC adapter and UPC endface

Starts a test

On/off key

Navigation keys

Press or hold down to enter and exit the setup menu. Press

to select an item, or to save a setting.

LCD display

IEC LR6

NEDA 15A

Note: Fluke Networks recommends alkaline batteries.

Autres manuels pour Fiber OneShot PRO

Table des matières

Autres manuels Fluke Équipement de test

Fluke

Fluke PRV240FS Manuel utilisateur

Fluke

Fluke 165X Manuel utilisateur

Fluke

Fluke 105B Manuel utilisateur

Fluke

Fluke 5520A Service Manuel

Fluke

Fluke Series II Manuel

Fluke

Fluke 9040 Manuel du propriétaire

Fluke

Fluke AIRCHECK Manuel d'instructions

Fluke

Fluke 709 Manuel d'instructions

Fluke

Fluke AIRCHECK Manuel utilisateur

Fluke

Fluke 707 Manuel d'utilisation et d'entretien

Fluke

Fluke 4180 Guide de démarrage rapide

Fluke

Fluke 154 HART Manuel utilisateur

Fluke

Fluke 1550C Manuel utilisateur

Fluke

Fluke 5700A Series Manuel utilisateur

Fluke

Fluke 9011 Manuel utilisateur

Fluke

Fluke 686 Manuel utilisateur

Fluke

Fluke ScopeMeter 190-104 Manuel d'instructions

Fluke

Fluke 9103 Manuel utilisateur

Fluke

Fluke FLUKE-718 Manuel utilisateur

Fluke

Fluke 753 Manuel utilisateur

Fluke

Fluke 721-1601 Manuel d'utilisation et d'entretien

Fluke

Fluke T6-600 Manuel utilisateur

Fluke

Fluke Series II Manuel utilisateur

Fluke

Fluke 1503 Manuel utilisateur

Manuels Équipement de test populaires d'autres marques

SMART

SMART KANAAD SBT XTREME 3G Series Manuel utilisateur

Agilent Technologies

Agilent Technologies BERT Serial Manuel utilisateur

Agilent Technologies

Agilent Technologies N3280A Manuel utilisateur

Vernier

Vernier Go Direct Voltage Manuel utilisateur

Lifeloc

Lifeloc R.A.D.A.R. Manuel utilisateur

Mercury

Mercury TSL01 Manuel utilisateur

MAHA

MAHA MBT Series Manuel utilisateur

Fuji Electric

Fuji Electric P-61 Manuel utilisateur

ETC

ETC SealerAtor Manuel utilisateur

Skyfine

Skyfine ETHYWAY V2 Manuel utilisateur

Appion

Appion G5 Twin Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuel utilisateur

BW Technologies

BW Technologies MicroDock II Manuel utilisateur

Sun Nuclear

Sun Nuclear 1027 Manuel utilisateur

Biomark

Biomark HPR LITE READER Manuel utilisateur

Hioki

Hioki 3169-20 Manuel utilisateur

Ashcroft

Ashcroft ATE-100 Manuel utilisateur

Rohde & Schwarz

Rohde & Schwarz RTA4000 Manuel utilisateur