Flextronics Mini P4 Barebone Series Manuel utilisateur
Mini Pentium 4 Barebone
User’s Manual
Version 1.1
ii User’s Manual
Mini P4 Barebone Series
iii
User’s Manual
Preface
FCC Compliance Statement
This equipment has been tested and found to comply with
limits for a Class B digital device, pursuant to Part 15 of
the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in
residential installations. This equipment generates, uses,
and can radiate radio frequency energy, and if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause interference to radio or television equipment
reception, which can be determined by turning the equip-
ment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Move the equipment away from the receiver
• Plug the equipment into an outlet on a circuit different
from that to which the receiver is connected
• Consult an experienced radio/television technician for
additional suggestions
This device complies with Part 15 of the FCC Rules.
Operation is subjected to the following two conditions 1)
this device may not cause harmful interference and 2) this
device must accept any interference received, including
interference that may cause undesired operation.
iv User’s Manual
Mini P4 Barebone Series
Disclaimer
The information in this document is subject to change
without notice. The manufacturer makes no representa-
tions or warranties regarding the contents of this manual
and specifically disclaims any implied warranties of
merchantability or fitness for any particular purpose.
Furthermore, the manufacturer reserves the right to revise
this publication or make changes in the specifications of
the product described within it at any time without notice
and without obligation to notify any person of such
revision.
Trademarks
Microsoft and Windows are registered trademarks of
Microsoft Corp. Intel and Pentium 4 are registered trade-
marks of Intel Corporation. Other product names used in
this manual are the properties of their respective owners
and are acknowledged.
Copyright
This publication, including all photographs, illustrations
and software, is protected under international copyright
laws, with all rights reserved. Neither this manual, nor any
of the material contained herein, may be reproduced
without the express written consent of the manufacturer.
©Copyright 2003
v
User’s Manual
Preface
Table of Contents
1: Introduction ......................................................... 1-1
About This Manual ............................................................ 1-2
Package Contents ............................................................. 1-2
Getting Started .................................................................. 1-1
2: Installation ........................................................... 2-1
Installing a CPU ................................................................. 2-1
Installing System Memory ................................................. 2-7
Installing Internal Peripherals ............................................ 2-9
Installing an IDE drive .................................................. 2-9
Installing a CD-ROM .................................................. 2-10
Completing System Configuration ................................... 2-10
3: External Components ......................................... 3-1
Front Panel ........................................................................ 3-1
Rear Panel ........................................................................ 3-3
4: BIOS Setup ......................................................... 4-1
Running the BIOS Utility .................................................... 4-1
Entering Setup ................................................................... 4-2
System Information ........................................................... 4-2
General Configuration ....................................................... 4-3
Advanced Configuration .................................................... 4-4
System Specific Setup ...................................................... 4-4
Primary / Secondary IDE Drives ........................................ 4-5
Peripherals ........................................................................ 4-6
Power Management .......................................................... 4-6
PCI & PNP ......................................................................... 4-7
Hardware Monitor .............................................................. 4-7
Restore Default Settings ................................................... 4-8
Exit .................................................................................... 4-8
5: Drivers and Utilities ............................................. 5-1
Running the Power Installer Disc ...................................... 5-1
Drivers and Utilities Screen ............................................... 5-1
vi User’s Manual
Mini P4 Barebone Series
Drivers Installation Screen ................................................ 5-1
Software Utility Screen ...................................................... 5-2
Make Driver Screen ........................................................... 5-2
Appendix 1: Hardware Layout .............................. A1-1
Components .................................................................... A1-1
Connectors ...................................................................... A1-1
Jumpers ........................................................................... A1-1
Motherboard Layout ........................................................ A1-2
Motherboard Layout Key .................................................A1-3
JCMOS1: Clear CMOS Jumper ...................................... A1-4
System Memory Socket .................................................. A1-5
CPU Socket & Cooling Fan / Heatsink Frame ................. A1-5
Expansion Slot ................................................................ A1-6
PCI Expanion slot ...................................................... A1-6
AGP Slot .................................................................... A1-6
IDE1, IDE2: IDE Drive Connectors .................................. A1-7
ATX12V Power Connectors ............................................. A1-7
J2, J3: Internal USB Connectors .....................................A1-8
J4: AUX-IN/ CD-IN ........................................................... A1-8
J8: Audio Connector ........................................................ A1-9
JPANEL1: Front Panel Connector ................................... A1-9
JCFAN1, JSFAN1: System Fan Connectors ................. A1-10
Appendix 2: Specifications.................................... A2-1
1 - 1User’s Manual
IntroductionChapter 1
1: Introduction
The mini P4 barebone is a high-performance personal computer
barebones system that supports the Intel® Pentium® 4
processor.The barebone’s motherboard has one DIMM
memory socket that accommodates 200/266 MHz DDR
SDRAM (without AGP slot version) or 200/266/333MHz DDR
SDRAM (with AGP slot version).
The without AGP slot model uses the latest Intel® 845GV chipset
or the Intel® 845GE chipset (with AGP slot version)
to integrate all system control functions.
Features of this system include support for:
•Intel® Pentium® 4 processor
•533/400 MHz system bus
•Up to 1GB DDR SDRAM
•One 32-bit PCI/33 MHz slot (without AGP slot version)
•One onboard AGP slot (with AGP slot version)
•Two USB 2.0 external ports on rear panel (stacked)
For a complete list of specifications, see Appendix 2,
Specifications.
1 - 2 User’s Manual
Mini P4 Barebone Series Chapter 1
About This Manual
This manual’s five chapters and two appendices cover the
following topics:
Chapter 1, Introduction, provides a basic introduction to
the system and package contents.
Chapter 2, Installation, explains basic installation
procedures.
Chapter 3, External Components, describes external
components.
Chapter 4, BIOS Setup, describes setting the BIOS.
Chapter 5, Drivers and Utilities, explains how to use the
bundled software drivers and utilities.
Appendix 1, Hardware Layout, describes the mother-
board layout, components, and configuration
Appendix 2, Specifications, lists the system’s technical
specifications.
Package Contents
The package contains the following items:
• One Barebone
• IDE connector cables
• Power cord
• Three spare Jumper caps
• Power Installer software & utilities disc
• User’s Manual
Inspect the system; if any items are damaged or missing,
contact Anyware Solutions Pte Ltd immediately.
2 - 1
User’s Manual
InstallationChapter 2
2: Installation
This chapter describes installing components and devices
on the barebone’ motherboard. Please review each of
the following procedures before you start. For the location
and description of system components, please refer to
Appendix 1, Hardware Layout.
Getting Started
The package contains the motherboard/chassis assembly,
plus one box containing the Fan/Heatsink, and one box
containing accessories.
1. Unpacking the package.
2. Remove the two smaller boxes and place to one side.
3. Remove the motherboard/chassis assembly, and
discard the foam and plastic packaging – or save it for
recycling.
4. Unscrew the three thumbscrews at the rear of the barebone
and remove the aluminum Housing.
5. Locate the CPU socket.
Installing a CPU
The motherboard supports the Intel Pentium 4 processor.
Follow the procedures below to avoid damaging the CPU
or motherboard.
2 - 2 User’s Manual
Mini P4 Barebone Series Chapter 2
Selecting a Processor
This motherboard supports all Intel Pentium 4 processors.
The motherboard’s BIOS automatically detects the
required settings and configures the CMOS Setup Utility.
Installing the Processor
It is important to review all of the instructions before
beginning the installation procedure. Carefully handle the
processor by its edges, and take all precautions against
electrostatic discharge. The boxed Intel Pentium 4 proces-
sor comes with a Heatsink and Thermal Interface Material
applicator. Non-boxed processors follow the same proce-
dures, but the accessories may have a different appear-
ance. The following illustrations are a generic representa-
tion and may not show the components’ exact appearance.
Note that you install the CPU by reaching your hands and
fingers through the chassis frame to manipulate the CPU
and socket.
1. Unlock the socket by pressing the lever sideways, then
lift it up to a vertical angle.
Step 1
Table des matières
Manuels Carte mère populaires d'autres marques
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manuel utilisateur
Gigabyte
Gigabyte GA-9IVDT Manuel utilisateur
Texas Instruments
Texas Instruments ADS8372EVM Manuel utilisateur
Commell
Commell MS-C73 Manuel utilisateur
IBT Technologies
IBT Technologies MB860 Manuel utilisateur
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur
