10
Level 3: System administrator, password 2000.
• All rights as for level 2, plus:
• Rights to all menus except I/O configuration and system
settings.
Level 4: OEM, password given only in consultation with the
Flexit service organisation.
• All rights as for level 3, plus:
• Rights to all menus and system settings.
Start page > Main menu > Log in
2.2.4.
Set time/time channels
Start page > Quick menu > Timing program
Parameter Function
Date and Time This is where you set the time and date
Continuous operation This is where you can override the
timing programs and switch the unit to
continuous operation
Current value Displays the current timing
(temperature and speed)
Monday to Sunday See explanation of week schedule
(2.2.4.2)
2.2.4.1.
Set the calendar and timing program
General
This section describes functions and settings for the timing
program and calendars.
When no object with higher priority (for example Manual
control <> Auto) is activated, the system can be switched off
or the steps changed via the timing program. A maximum of
six switch-over times can be specified per day.
The calendar stop overrides the calendar exception, which in
turn overrides the normal timing program (only in operating
mode). Up to 10 periods or exception days can be specified
for each calendar.
NB! Both setpoints for fan steps and temperature setpoints
(comfort /economy) are controlled by the timing program.
2.2.4.2.
Week schedule
Parameter Value Function
Current value --- Switching according to schedule
Monday Shows current command when the
current day is Monday. The latest
time that can be entered for a day
is 23:59. Go to the day switching
schedule for Mondays
Copy schedule
–Mon to
–Tu– Fr
–Tu– Su
Copies times for the timing
program from Monday to
Tuesday–Friday/Tuesday–Sunday.
– Passive (no copying).
– Copying starts. Return to the
display screen
Tuesday Same function as for Monday
... ...
Sunday Same function as for Monday
Exception Shows current command when the
current day is an exception day.
Go to the day switching schedule
for exception days
Period: Start
Period: Start
(Only Authority level 3.)
Start date for week schedule.
*,* *.00 means that the week
schedule is always activated. --->
Activate week schedule
Period: End
Period: Start
(Only Authority level 3.)
Start date and start time for
deactivating week schedule
2.2.4.3.
Dayschedule
Parameter Value Function
Current
value
--- Switching according to the
schedule when the current
weekday is the same as the
switching day
Day
schedule
– Passive
– Active
Status for current week or
exception day:
– Current weekday (system day) is
not the same as the switching day.
– Current weekday (system day) is
the same as the switching day
Time-1 Special case: This time must not
be changed, and must always be
00:00
Value-1 Switching command for Time-1
Time-2 Switching time 2
*: * ---> Time deactivated
Value-2 ...
Value-6
Analogue value 1
Time-3 ...
Time-6
Analogue time 2
