FLATLIFT Pop-Up Manuel utilisateur
P.01
Operating Manual
Outperform. Outlast.
Operating Manuel
Operating Manual
P.02
Operating Manual
Outperform. Outlast.
CONTENTS
CONTENTS
C.01 INTRODUCTION
C.02 FEATURES
C.03 PRODUCT DIMENSIONS
C.04 INITIAL PRODUCT SET UP
Set-up P.06
Images P.07-08
K.05 PRODUCT INTEGRATION
C.07 TROUBLE SHOOTING
C.08 LEGAL NOTICE
C.06 RECOMMANDED INSTALLION
Example of console integration P.12
Example of back of sofa integration P.13
CONTENTS
P.03
Operating Manual
Outperform. Outlast.
CONTENTSCONTENTS
Intended Use
The product serves the lifting and lowering of LCD and plasma TV equipment.
All company names and product names are trademarks of the corresponding owner. All rights reserved.
The scope of supply can vary depending on the product and the range of xtures and ttings. Please
check that the product supplied is complete and inform us within seven days of delivery if the scope of
supply is not complete.
Safety and Hazards Recommendations
Please read this chapter carefully and follow all of the instructions provided. In this way you are able to
guarantee the reliable operation and a long lifespan for your lift system. Keep the operating manual in a
safe place.
In the event of damage which is the result of non compliance with this operating manual, all claims pertai-
ning to the guarantee are null and void. We generally accept no responsibility for secondary damage.
We accept no responsibility for damage to objects or persons which is caused by the inappropriate use of
the product or through ignoring the safety instructions. In such cases, all claims pertaining to the guaran-
tee are null and void.
Quality
In the choice of our components, our primary focus was on ensuring a high level of functionality,
straightforward use, safety and reliability.
We would like to thank you for the trust you have placed in our Flatlift brand products.
We can help you with your installation through providing individual customer care.
For safety reasons, the unauthorized conversion and/or changing of the product is not permitted. Do not
dismantle this product.
This product is not a toy and does not belong in the hands of children.
Do not allow the product to become damp or wet.
Do not leave the packaging material lying around as children may choke if they swallow it.
The product will be damaged if it is dropped, even from a low height.
Before using the product for the rst time, please check that the free raising and lowering of the Flatlift
including the mounted TV equipment is possible and ensure a collision-free run.
INTRODUCTION
INTRODUCTION
C.01:
For legal reasons and insurance purposes, your Flatlift is equipped with an ‘automatic safety
device’.
This means that the button which controls the raising and lowering must be pressed down all
the time.
The system stops and remains in the same position as soon as you let go of the button.
P.04
Operating Manual
Outperform. Outlast.
* not relevant
Features:
Installation base
W=177 mm D=97 mm
Installation dimensions, Flatlift
W=785 mm D=157 mm H=603 mm
Lift 635mm
Lifting speed 30 mm / sec
TV weight max. 35 kg / 350N / including cover (P.011)
TV size 26“-42“ (inches)
(max. TV size possible in mm: W = * , H = max. 586, D = *)
Power-on time 18%/h
Can be tilted (-15° manual).
Soft Start / Soft Stop
Low noise level < 45 dB
Environmental temperature from +5°C to 40°C
Flatlift Pop-Up Light TV Lift
Cableset
Universalretainer up to 42“
IR Remote Control
Touchpanel
IR eye
Scope of supply:
BUY NOW
L
I
F
E
T
I
M
E
R
e
p
a
i
r
c
o
s
t
l
i
m
i
t
5
y
e
a
r
s
f
u
l
l
s
e
r
v
i
c
e
GUARANTY
C.02:
PRODUCT FEATURES
PRODUCT FEATURES
P.06
Operating Manual
Outperform. Outlast.
Abb.1
2
3
5
4
1
INITIAL PRODUCT SET U
INITIAL PRODUCT SET UP
C.04:
Initial set up:
1. First tting left and right an wooden beam on your Flatlift (image 1, no. 1) and screw the wooden
beams onto the subgrade, to t the Flatlift system.
2. Connect the Flatlift (image 1, no. 3) with the motor cable (P.07, image 3) and then the motor cable
with the conrol box (P.07, image 2, no. 5).
3. Now plug-in the RJ45 connector of the touchpanel (p.07, image 2, no. 6) into t the control box.
4. First connect the power cable (P.08, image 5) into the control box and then connect the power cable
in the power supply voltage.
5. Connect the IR eye (P.07, image 4b, no.9) with the touchpanel. Be sure, that the IR eye (p.07, image
4b, no. 9) is not hidden. Place the IR receiver well visibily, because it is very important for the connec-
tion between your IR remote control and IR eye.
6. Your Flatlift ist now ready.
7. Now you can assamble the TV onto the Flatlift system (image 1, no. 2)and save your TV with the
safty screw (image 1, no. 4).
8. And that´s it. Now you can use your IR remote control comfortable with the buttons „up“ and „down“
(P.08, image 10, no. 10 and no. 11) to control your Flatlift system.
P.09
Operating Manual
Outperform. Outlast.
C.05:
image 2
INITIAL PRODUCT SET U
PRODUCT INTEGRATION
PRODUCT INTEGRATION
Image 1
Lid variation 1:
A lid closing mechanism on the
rear section of the unit incor-
porating spring damped hinges
which opens automatically when
the Flatlift moves upwards.
Different lid closing solutions are
available depending on the reali-
sation of the project (image 1).
The A/V installer which is ins-
talling the Flatlift thus enjoys
exibility and can also change
the lid solution again at a later
time. When the Flatlift retracts,
the cover closes softly thanks to
the spring dampened hinges.
TV tilting:
The TV can naturally also be
tilted using the side hand wheels
by up to 15° (Image 2).
If you want the TV set to be
tilted, please remember to set up
the Flatlift system accordingly to
ensure that it doesn’t collide with
the case when moving.
P.010
Operating Manual
Outperform. Outlast.
C.05:
PRODUCT INTEGRATION
PRODUCT INTEGRATION
Image 3
Image 4
Lid variation 2:
In this version, the lid goes up
with the Flatlift and rests on the
top of the TV set. This variation
is known as the ‚oating top‘
version.
Depending on the customer
requirements, you can also at-
tach the lid to the Flatlift using
a U-bracket and/or attach it to
the TV holder with 2 L-rods, as
shown in image 4.
Table des matières
Autres manuels FLATLIFT Support TV
