Fisher & Paykel OB76S Manuel utilisateur
BUILT-IN OVEN
OB76S & OB76D
touchscreen models
INSTALLATION GUIDE
NZ AU
1
SAFETY AND WARNINGS
WARNING!
To avoid hazard, follow these instructions carefully before installing or using this appliance.
zzPlease make this information available to the person installing the appliance
— doing so could reduce your installation costs.
zzThis appliance must be installed and connected to the mains power supply only
by asuitably qualified person according to these installation instructions and
incompliancewith any applicable local building and electricity regulations.
Failure to install the appliance correctly could invalidate any warranty or
liability claims.
zzIf the installation requires alterations to the domestic electrical system, call a
qualifiedelectrician. The electrician should also check that the socket cable section
issuitable forthe electricity drawn by the oven.
zzThe oven must be earthed.
zzIf the power supply cable is damaged, it must be replaced by the manufacturer,
itsservice agent or similarly qualified person in order to avoid a hazard.
zzIsolating switch: ensure this oven is connected to a circuit which incorporates
anisolating switch providing full disconnection from the power supply in accordance
with the wiring rules.
zzDo not use adaptors, reducers or branching devices to connect the oven to the mains
electricity supply, as they can cause overheating and burning.
zzEnsure the cavity is completely sealed with no gaps. This is to ensure the oven cooling
system functions correctly.
zzThe appliance must not be installed behind a decorative door in order to
avoidoverheating.
! WARNING!
Electric Shock Hazard
Failure to follow this advice may result in
electric shock or death.
• Before carrying out any work on the electrical
section of the appliance, it must be disconnected
from the mains electricity supply.
• Connection to a good earth wiring system is
absolutely essential and mandatory.
• Alterations to the domestic wiring system must
only be made by a qualified electrician.
! WARNING!
Fire Hazard
Failure to follow this advice may result in
overheating, burning, and injury.
• Do not use adapters, reducers, or branching
devices to connect this appliance to the mains
power supply.
! WARNING!
Cut Hazard
Failure to use caution could result in injury.
• Take care: some edges are sharp.
IMPORTANT!
SAVE THESE INSTRUCTIONS
The models shown in this installation guide may not be available in all markets and are subject to change at any time. For current details about model and specification availability in your country,
please go to our website www.fisherpaykel.com or contact your local Fisher&Paykel dealer.
! WARNING!
409lb
186kg
242lb
110kg
Very Heavy
Failure to follow this advice may result in
serious injury.
• Do not attempt to lift this product unassisted.
2
AFTER INSTALLATION
PARTS SUPPLIED
PRIOR TO INSTALLATION
zzthe benchtop and oven cavity are square and level, and are the required dimensions.
zzthe installation will comply with all clearance requirements and applicable standards and regulations.
zza suitable isolating switch providing full disconnection from the mains power supply is incorporated in the permanent wiring, mounted and positioned to comply with the local wiring rules
and regulations. The isolating switch must be of an approved type and provide a 3 mm air gap contact separation in all poles (or in all active [phase] conductors if the local wiring rules
allow for this variation of the requirements).
zzthe isolating switch will be easily accessible to the customer with the oven installed.
zzthe electrician provides sufficient free length of power supply cable to reach from the bottom rear of the cavity to at least 1.5 metres in front of the bottom edge of the opening.
zzthe cable may enter the cavity from the side, top or bottom, but top entry must be at the rear of the cavity.
zzthe oven connection socket (if fitted) is outside the cavity if the oven is flush to the rear wall.
zzthe oven will rest on a surface that can support its weight.
zzthe height from the floor suits the customer.
zzyou consult local building authorities and by-laws if in doubt regarding installation.
IMPORTANT!
Some environmental factors and cooking habits can cause condensation in and around the oven during use. To protect surrounding cabinetry from possible damage caused by frequent or
excessive condensation, we recommend moisture-proofing the oven cavity.
IMPORTANT!
Please take extra care not to damage the lower trim of the oven during installation. The trim is important for correct air circulation and allows the door to open and close without
obstruction. The manufacturer does not accept any responsibility for damage resulting from incorrect installation.
zzthe oven door(s) can open fully without obstruction.
zzdo not seal the oven into the cabinetry with silicone or glue. This makes future servicing difficult. Fisher&Paykel will not cover the costs of removing the oven, or of damage caused by
thisremoval.
zzthe power supply cable does not touch any hot metal parts.
zzthe isolating switch is easily accessible to the customer with the oven installed.
zzyou complete the ‘Final checklist’ at the end of the installation.
zzif, after following the instructions given, correct performance cannot be achieved, please contact your nearest Fisher&Paykel Authorized Service Center, Customer Care, or contact us
through our local website listed at the end of this document.
Screws
Single oven models (2)
Double oven models (4)
Spacers
Single oven models (2)
Double oven models (4)
Long Trim (1)
To be fitted in
a flush installation.
3
PRODUCT DIMENSIONS — SINGLE OVENS
PLAN
PROFILEFRONT
PRODUCT DIMENSIONS
OB76SD
MM
A Overall height of product 690
B Overall width of product 760
C Overall depth of product (excl. handle and dials) 610
D Depth of oven front and control panel (excl. handle and dials) 40
E Depth of chassis (does not include oven front) 569
F Height of chassis 675
G Depth of door (open) (measured from front of door) 550
H Overall width of chassis 720
Note: If flush installing, you need to replace the lower trim with the supplied long trim at the base of the
oven, and the depth of the control panel Gwith the fitted spacer is larger than conventional ovens. Ensure
you have created a 42mm recess incabinetry.
G
B
A
C
F
CD
H
4
CABINETRY DIMENSIONS — SINGLE OVENS
PLANPROFILE
e b
a
c d
Electrical
Supply
PROUD INSTALL
FLUSH INSTALL
16-20mm
42mm
min 2mm
spacer
42mm
16-20mm
min 2mm
spacer
CABINETRY DIMENSIONS
OB76SD
MM
A Minimum inside width of cavity 724
B Overall width of cabinetry 764
C Minimum inside height of cavity 681
D Overall height of cabinetry 693
E Minimum inside depth of cavity
zProud install
zFlush install
575
614
Notes:
If installing a cooktop above the oven, ensure adequate clearance is provided for the cooktop as per the
cooktop manufacturer’sinstructions.
Ensure the cavity is completely sealed with no gaps. This is to ensure the oven cooling system functions
correctly.
5
PRODUCT DIMENSIONS — DOUBLE OVENS
PRODUCT DIMENSIONS OB76DD
MM
A Overall height of product 1232
B Overall width of product 760
C Overall depth of product (excl. handle and dials) 610
D Depth of oven front and control panel (excl. handle and dials) 40
E Depth of chassis (does not include oven front) 569
F Height of chassis 1218
G Depth of upper door (open) (measured from front of door) 550
H Depth of lower door (open) (measured from front of door) 530
I Overall width of chassis 720
Note: If flush installing, you need to replace the lower trim with the supplied long trim at the base of the
oven, and the depth of the control panel Gwith the fitted spacer is larger than conventional ovens. Ensure
you have created a 42mm recess incabinetry.
PLAN
PROFILEFRONT
G
h
B
A
C
F
ED
i
6
CABINETRY DIMENSIONS OB76DD
MM
A Minimum inside width of cavity 724
B Overall width of cabinetry 764
C Minimum inside height of cavity 1224
D Overall height of cabinetry 1236
E Minimum inside depth of cavity
zProud install
zFlush install
575
614
Notes:
If installing a cooktop above the oven, ensure adequate clearance is provided for the cooktop as per the cooktop
manufacturer’sinstructions.
Ensure the cavity is completely sealed with no gaps. This is to ensure the oven cooling system functions correctly.
CABINETRY DIMENSIONS — DOUBLE OVENS
PROFILE PLAN
e
b
a
c d
Electrical
Supply
PROUD INSTALL
FLUSH INSTALL
16-20mm
42mm
min 2mm
spacer
42mm
16-20mm
min 2mm
spacer
7
UNPACKING THE OVEN
Remove the accessories box from
the top of the oven and set aside.
Recycle responsibly.
Single model shown for illustration purposes only
IMPORTANT!
zWhen you remove the oven from the carton
be careful not to damage the lower trim.
Thetrimisimportant for both ventilation and to
ensure the door opens fully without obstruction.
zEnsure you remove the Long Trim
from thepackaging.
Lower trim
8
REMOVING AND REFITTING THE DOOR(S)
IMPORTANT!
zTake care, the oven door is heavy.
zDo not lift the oven door by its handle. Doing so may damage the door.
zEnsure the oven and the door are cool before you begin to remove the door.
zBefore removing the door, ensure there is a large enough clear, protected surface in the kitchen to rest the door on.
To remove the door(s) To refit the door(s)
Holding the door at 45°, carefully
align the hinge tongues with the
hinge slots. Push the door in until
you feel the latches locate into
position on each side.
Open the door completely and
ensure both hinges are secured
by the correct notches.
Rotate the locks up into the
closed position ensuring they rest
inside the slots completely. Note:
Incorrect installation will prevent
door from correctly sealing.
1
2
3
Open the door completely.
Open the hinge locks fully
on both sides
Holding the door on both
sides, lift door back up to 45°
and carefully pull the door out
and away from the hinges.
1
2
3
Close the oven door ensuring that
when closed, the door is vertical and
parallel to any surrounding cabinetry
4
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Fisher & Paykel Four
Fisher & Paykel
Fisher & Paykel OB24SDPX Instructions de montage
Fisher & Paykel
Fisher & Paykel BI453 Manuel utilisateur
Fisher & Paykel
Fisher & Paykel OB60S9DEP Manuel utilisateur
Fisher & Paykel
Fisher & Paykel OB24SC Manuel utilisateur
Fisher & Paykel
Fisher & Paykel OB60 Series Instructions de montage
Fisher & Paykel
Fisher & Paykel OB30SCEPX3 N Manuel utilisateur
Fisher & Paykel
Fisher & Paykel WOSV230 Manuel utilisateur
Fisher & Paykel
Fisher & Paykel Aerotech OB30 Series Manuel utilisateur
Fisher & Paykel
Fisher & Paykel Essence NULL Manuel du propriétaire
Fisher & Paykel
Fisher & Paykel OS24SDTDB1 Manuel utilisateur
Fisher & Paykel
Fisher & Paykel OR30SCG6B1 Manuel d'utilisation et d'entretien
Fisher & Paykel
Fisher & Paykel OB60SL11DEPX1 Manuel utilisateur
Fisher & Paykel
Fisher & Paykel Titan AeroTech OD302-B Manuel utilisateur
Fisher & Paykel
Fisher & Paykel OB90 Series Manuel utilisateur
Fisher & Paykel
Fisher & Paykel Aerotech OB30SD Manuel utilisateur
Fisher & Paykel
Fisher & Paykel OB24SDPX2 Manuel de la liste des pièces
Fisher & Paykel
Fisher & Paykel OB60N8DTX Instructions de montage
Fisher & Paykel
Fisher & Paykel Aerotech OS302 Manuel utilisateur
Fisher & Paykel
Fisher & Paykel MINIMAL Series Manuel utilisateur
Fisher & Paykel
Fisher & Paykel OB60SL9DEX1 Manuel utilisateur
