Firich Enterprise Gladius Smart Manuel utilisateur

Version 1.4

All other brand names are registered trademarks of their respective owners.

Gladius Smart

15” All in one POS PC

CO., LTD. has the right to make improvements of the product described in this manual at

any time without notice.

No part of this manual may be reproduced, copied, translated, or transmitted in any form

or by any means without the prior written permission from FIRICH ENTERPRISES CO.,

LTD.. Information provided in this manual is intended to be accurate and reliable.

However, FIRICH ENTERPRISES CO., LTD. assumes no responsibility for its use, nor

for any infringements upon the rights of third parties, which may result from its use.

The material in this document is for product information only and is subject to change

without notice. While reasonable efforts have been made in the preparation of this

document to assure its accuracy, FIRICH ENTERPRISES CO., LTD., assumes no

liabilities resulting from errors or omissions in this document, or from the use of the

information contained herein.

Safety and Warranty

1. Read these safety instructions carefully.

2. Keep this user's manual for later reference.

3. Disconnect this equipment from any AC outlet before cleaning. Do not use liquid or spray

detergents for cleaning. Use a damp cloth.

4. For pluggable equipment, the power outlet must be installed near the equipment and must be

easily accessible.

5. Keep this equipment away from humidity.

6. Put this equipment on a reliable surface during installation. Dropping it or letting it fall could

cause damage.

7. The openings on the enclosure are for air convection. Protect the equipment from overheating.

DO NOT COVER THE OPENINGS.

8. Make sure the voltage of the power source is correct before connecting the equipment to the

power outlet.

9. Position the power cord so that people cannot step on it. Do not place anything over the power

cord.

10. All cautions and warnings on the equipment should be noted.

11. If the equipment is not used for a long time, disconnect it from the power source to avoid

damage by transient over-voltage.

12. Never pour any liquid into an opening. This could cause fire or electrical shock.

13. Never open the equipment. For safety reasons, only qualified service personnel should open

the equipment.

14. If any of the following situations arises, get the equipment checked by service personnel:

a. The power cord or plug is damaged.

b. Liquid has penetrated into the equipment.

c. The equipment has been exposed to moisture.

d. The equipment does not work well, or you cannot get it to work according to the users

manual.

e. The equipment has been dropped and damaged.

f. The equipment has obvious signs of breakage.

15. DO NOT LEAVE THIS EQUIPMENT IN AN UNCONTROLLED ENVIRONMENT WHERE

THE STORAGE TEMPERATURE IS BELOW -20°C (-4°F) OR ABOVE 60°C (140°F). IT

MAY DAMAGE THE EQUIPMENT.

The information in this guide is subject to change without prior notice.

The manufacturer shall not be liable for technical or editorial errors or omissions contained

herein, nor for incidental or consequential damages resulting from the furnishing, performance,

or use of this material.

This manual contains information protected by copyright. No part of this manual may be

photocopied or reproduced in any form without prior written consent from the manufacturer.

The software described in this guide is furnished under a license agreement or nondisclosure

agreement. The software may be used or copied only in accordance with the terms of the

agreement.

Product names mentioned herein may be trademarks and/or registered trademarks of their

respective companies.

First Edition May 2011

Introduction 7

Gladius Smart Characteristics..............................................................................................7

A Quick Tour of GLADIUS SMART......................................................................................8

GLADIUS SMART Dimension.....................................................................................10

Rear I/O Panel (with 5 types of Second IO board) .............................................................11

Packing List.......................................................................................................................12

How to Use This Manual....................................................................................................13

Hardware Setup 14

Model GLADIUS SMART Assembly...................................................................................14

Access to jumper setting and RAM.............................................................................14

Adapter Installation.....................................................................................................14

2.5” Hard Disk Drive Installation..................................................................................15

Magnetic Card Reader Installation..............................................................................16

VFD Customer Display Installation..............................................................................17

Cash Drawer Installation.............................................................................................18

Software Setup 19

Please follow this installation sequence accordingly..........................................................21

Intel Chipset Driver Installation for Windows XP ................................................................22

VGA Driver Installation.......................................................................................................24

Audio Driver Installation.....................................................................................................26

Lan Driver Installation........................................................................................................27

ELO Touch Tools Installation.............................................................................................29

ELO Touch Tools Installation .....................................................................................29

ELO Control Panel......................................................................................................33

Wireless LAN Driver Installation.........................................................................................36

Specifications 39

Gladius Smart Specifications.............................................................................................39

I/O Pin Definition................................................................................................................40

Jumper Setting...................................................................................................................44

Troubleshooting 51

Power is on, but there is no Panel Display..................................................................51

Cannot Detect HDD....................................................................................................51

Touch Panel does not Work........................................................................................51

ELO Touch Panel Cannot Calibrate Correctly.............................................................51

Second LCD Panel is Not Functioning Properly..........................................................52

PS/2 Keyboard is not functioning normally..................................................................52

MCR is not functioning properly..................................................................................52

VFD Display is not functioning properly.......................................................................53

LAN is not functioning properly ...................................................................................53

COM1 and COM2 are not functioning properly ...........................................................53

Cash Drawer Port is not functioning Properly..............................................................53

Gladius Smart Characteristics

Gladius Smart is a flagship system of FIRICH ENTERPRISES CO., LTD. All-in-one

fan-less POS solution. The extensible, robust and fan-less design makes it a

perfect solution for retail and hospitality market.

System: A high speed fan-less processor enables to process a high capacity of data

efficiently.

Housing: The solid aluminum housing dissipates the heat inside the system and

makes it a perfect fan-less solution; additionally it also assures the compliance to EMI

radiation testing.

Display: The LCD display can be tilted at multiple angles for operator ease of use.

Extensibility: It can be adapted to a variety of uses with the addition of any of the

following options: Magnetic Card Reader, VFD/LCD customer display and Cash

drawer, biometric reader and a wide variety of USB devices (all available upon request)

Gladius Smart with

VFD

Gladius Smart with 2nd

Display

GLADIUS SMART System manual version 1.4

Detachable Stand Optional LCM

A Quick Tour of GLADIUS SMART

Before you start, please take a moment to become familiar with GLADIUS SMART.

GLADIUS SMART System manual version 1.4

Identification Devices

1st Display

Back I/O

VFD or Monitor

pole stand

Power LED

HDD

Wireless Module

Power Adapter

Power Cable

LCM

GLADIUS SMART System manual version 1.4

GLADIUS SMART Dimension

Table des matières

Autres manuels Firich Enterprise Terminal tactile

Firich Enterprise

Firich Enterprise RichPOS 3600 Manuel utilisateur

Firich Enterprise

Firich Enterprise XP-3125W Manuel utilisateur

Firich Enterprise

Firich Enterprise AerPPC PP-9635 Manuel utilisateur

Firich Enterprise

Firich Enterprise BP-363 Manuel utilisateur

Firich Enterprise

Firich Enterprise Aer PPC series Manuel utilisateur

Firich Enterprise

Firich Enterprise Gladius Smart FH-5251 Manuel utilisateur

Firich Enterprise

Firich Enterprise BP-325 Manuel utilisateur

Firich Enterprise

Firich Enterprise RT-665D Manuel utilisateur

Firich Enterprise

Firich Enterprise Gladius Smart FH-5251 Manuel utilisateur

Firich Enterprise

Firich Enterprise Mega POS MP-3525 Manuel utilisateur

Firich Enterprise

Firich Enterprise PP-1125 Manuel utilisateur

Firich Enterprise

Firich Enterprise AerPOS AP-3435 Manuel utilisateur

Firich Enterprise

Firich Enterprise AerPOS AP-3615 Manuel utilisateur

Manuels Terminal tactile populaires d'autres marques

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Manuel utilisateur

Ingenico

Ingenico AXIUM EX4000 Manuel utilisateur

Heisei Electronics

Heisei Electronics Q-POS 815 Manuel utilisateur

Amano

Amano MTX-15 Manuel utilisateur

FLOWBIRD

FLOWBIRD CWT Compact Touch Manuel utilisateur

Demco

Demco SP7 Manuel utilisateur

Lathem

Lathem PC600 Series Manuel utilisateur

Partner

Partner MF-2352 Manuel utilisateur

NCR

NCR RealPOS 7460-2 Manuel

Simrad

Simrad MS50 Instructions de montage

Unitech

Unitech MR350 MKII Guide de démarrage rapide

Jungheinrich

Jungheinrich WMT 210 Manuel utilisateur

Motorola

Motorola MTP850 Manuel utilisateur

YASKAWA

YASKAWA 62H-MDC0 Manuel utilisateur

MVG industries

MVG industries NeptuLink Manuel utilisateur

Price Industries Limited

Price Industries Limited FDC Manuel d'instructions

Honeywell

Honeywell TemaKey Manuel utilisateur

EBN

EBN BPC65-B-A16G Manuel utilisateur