Fairchild T7900 Manuel utilisateur

FAIRCHILD T7900 HIGH FLOW

ELECTRO-PNEUMATIC TRANSDUCER

Installation Instructions

The Model T7900 is supplied with a Mounting Kit 19634-1

for Panel or Wall Mounting. For more information, see

Figure 1. above.

If the Remote Pressure Sensing Option has been

provided, connect an air line from the Remote Pressure

Sensing Port to the sensing location. Support the 1/8

NPT remote pressure sensing adapter with a wrench

when installing the air line fitting. For more information,

see Figure 1. above.

Figure 1. T7900 Outline Dimensions shown with Mounting Kit 19634-1. (Included with Unit)

INSTALLATION

The information set forth in the foregoing Installa-

tion, Operation and Maintenance Instructions shall

not be modified or amended in any respect without

prior written consent of Fairchild Industrial Prod-

ucts Company. In addition, the information set

forth herein shall be furnished with each product

sold incorporating Fairchild's unit as a component

thereof.

LEGAL NOTICE:

Part number

055-IPI-089M

055-IPI-089-F

032-IPI-009-3M

032-IPI-099-3F

Description

Male connector (Feedback)

Female connector (Input)

Male cable w/one connector

Female cable w/one connector

Apply a minimum amount of pipe compound to the male

threads of the air line only. Do Not use teflon tape as a

sealant. Start with the third thread back and work away

from the end of the pipeline to avoid the possibility of getting

pipe compound into the air lines.

The inlet and outlet ports are labeled on the side of the

transducer. Tighten connections securely. Avoid under-

sized fittings that will limit the flow through the transducer.

For more information, see Figure 1. “T7900 Outline Dimen-

sions” on page 1.

NOTES:

Electric Connection

Pneumatic Connections

Clean all pipelines to remove dirt and scale before

installation.

Figure 2. Electrical Connections.

For the T7900 Transducer, make connections as shown

below in Figure 2. “Electrical Connections”. For compatible

cord sets and connectors refer to Table 1. below.

For signal lines of six feet or less, 22 gage wire may be used.

For longer signal lines, use 18 gage wire. Shielded cable

Must Be Used for the signal lines for noise immunity.

Oil free air is required. Use a filter to remove

dirt and liquid in the air line ahead of the

transducer. If an air line lubricator is used, it

MUST be located downstream to avoid inter-

ference with transducer performance.

Supply pressure must be no less than 5 psig,

[0.35 BAR], (35 kPa), above maximum output.

II-500T7900

Litho in USA

Rev. C 9/02

(3 meter)

(3meter)

Table 1. T7900 Cables and Connectors (Sold Separately)

1 Colors apply only to FIPC DeviceNet compatible cables.

P.S.I. Supplies Pty Ltd trading as

PSI Fluid Power

For sales information contact:

www.psifluidpower.com.au

sales@psifluidpower.com.au

Ph: +61 (0) 3 9720 5577

Table des matières

Autres manuels Fairchild Transducteur

Fairchild

Fairchild TXI7800 Manuel

Fairchild

Fairchild T6000 Mode d’emploi

Fairchild

Fairchild T79 Series Manuel d'utilisation et d'entretien

Fairchild

Fairchild T5200 Series Manuel

Fairchild

Fairchild T7800 Series Instructions générales

Fairchild

Fairchild T6000 Manuel utilisateur

Fairchild

Fairchild T6100 Manuel

Fairchild

Fairchild T7800 Series Manuel

Fairchild

Fairchild TT7800 Manuel

Fairchild

Fairchild T6000 Manuel utilisateur

Fairchild

Fairchild T5220 Manuel

Manuels Transducteur populaires d'autres marques

HBM

HBM AD101B Manuel utilisateur

Camille Bauer

Camille Bauer SINEAX F534 Manuel utilisateur

Trane

Trane KIT 16724 Instructions de montage

Lumel

Lumel P18 Manuel utilisateur

B&C Speakers

B&C Speakers DE75PTN Manuel utilisateur

MAMAC SYSTEMS

MAMAC SYSTEMS PR-243 Manuel

Mianyang Weibo Electronic

Mianyang Weibo Electronic WB Series Manuel utilisateur

ProMinent

ProMinent Dulcometer DMT Manuel utilisateur

MKS

MKS MicroPirani 925 Series Comment utiliser

WIKA

WIKA WU-20 Manuel utilisateur

Alcatel Vacuum Technology

Alcatel Vacuum Technology BARATRON 622A Manuel utilisateur

Camille Bauer

Camille Bauer SIRAX CH-5610 Manuel utilisateur

WIKA

WIKA F2802 Manuel utilisateur

Veris Industries

Veris Industries PW Series Manuel utilisateur

HBM

HBM TJ1-S6 Manuel utilisateur

Simrad

Simrad ES120-7C - REV D Guide de l'utilisateur

HBM

HBM C18 Manuel utilisateur

Airmar

Airmar M260 Mode d’emploi