F5 I15000 Series Instructions d'utilisation

Setting Up the i15000 Series Platform

MAN-0661-02

Table of Contents

Platform Overview......................................................................................................................5

About i15000 Series models..............................................................................................5

About the platform..............................................................................................................5

Hardware included with the platform..................................................................................6

Peripheral hardware required.............................................................................................7

Platform Installation...................................................................................................................9

About installing the i15000 Series platform........................................................................9

About the quick-install rails................................................................................................9

Quick-install rail kit hardware..................................................................................9

Install the rail lock brackets...................................................................................10

About installing the i15000-N (NEBS) platform................................................................11

Secure the i15000-N (NEBS) platform to the rack................................................11

About grounding the platform...........................................................................................12

Connect the ground lug to the ground terminal.....................................................13

Connect the cables and other hardware..........................................................................13

Configure a management IP address using the LCD.......................................................15

License the platform.........................................................................................................18

Environmental Guidelines........................................................................................................19

General environmental and installation guidelines...........................................................19

Chassis rack-mount spatial requirements........................................................................20

Guidelines for power supply units (PSUs)........................................................................21

Guidelines for AC-powered equipment............................................................................22

Guidelines for DC-powered equipment............................................................................22

Guidelines for NEBS platforms........................................................................................23

Platform airflow diagram..................................................................................................23

Legal Notices............................................................................................................................25

Legal notices....................................................................................................................25

Table of Contents

Platform Overview

About i15000 Series models

The i15000 Series platform is a powerful system that is designed specically for application delivery

performance and scalability.

The i15000 Series platform is available in a Network Equipment-Building System (NEBS) compliant version

(i15000-N). The i15000-N with stock DC power supply units (PSUs) is NEBS compliant. The i15000-N

with AC PSU upgrades (UPGs) is not NEBS compliant. The i15000 with stock AC PSUs is not NEBS

compliant.

For more information, please see the data sheet at www.f5.com/pdf/products/big-ip-platforms-datasheet.pdf.

About the platform

Before you install this platform, review information about the controls and ports located on both the front

and back of the platform.

On the front of the platform, you can use the LCD touchscreen to view information about, manage, and

reset the system. You can also use the front-panel LEDs to assess the condition of the system.

Figure 1: Front view of the i15000 Series platform

Figure 2: Front view of the i15820-DF platform

1. 100/1000/10000 (100Base-T, 1GBase-T, 10GBase-T) capable management port

2. USB 3.0 port

3. Console serial port

4. Serial (hard-wired) failover port

5. 40GbE QSFP+ ports (8)

6. 100GbE QSFP28 ports (4)

7. Indicator LEDs

8. 2.2 inch LCD touchscreen

The back of the i15000 Series platform includes the fan tray, two power supply units (PSUs), the chassis

ground terminals, and the storage drives (located behind the fan tray).

Figure 3: Back view of the i15000 Series AC-powered platform

1. Fan tray (removable)

2. Power input panel 1 (AC power receptacle)

3. Power input panel 2 (AC power receptacle)

4. Chassis ground terminals

Figure 4: Back view of the i15000 Series DC-powered platform

1. Fan tray (removable)

2. Power input panel 1 (DC terminal)

3. Power input panel 2 (DC terminal)

4. Chassis ground terminals

Hardware included with the platform

This platform includes all of the hardware components listed here.

HardwareQuantity

Power cables (black), AC power only, per platform

conguration. Might include multiple power cable

types if product is delivered outside of the

US/Canada.

DC PSU connectors, standard DC power only. By

default, this platform includes two DC PSUs and two

PSU connectors.

Platform Overview

HardwareQuantity

RJ45 to RJ45 failover cable, CAT 5 crossover (blue)1

RJ45 to DB9 console port cable (beige)1

RJ45F to RJ45M rolled adapter (beige)1

Quick-install rail kit1

Rail lock brackets2

M3 x 8mm athead screws, black with patch4

#8-32 pan head screws, steel zinc4

Peripheral hardware required

For each platform, you might need to provide additional peripheral hardware. If you plan to remotely

administer the system, it would be helpful to have a workstation already connected to the same subnet as

the management interface.

DescriptionType of hardware

You must provide networking devices that are

compatible with the network interface ports on the

Network hubs, switches, or connectors to connect to

the platform network interfaces

platform. You can use either 10000-Megabit switches

with a breakout cable or 40/100-Gigabit Ethernet

switches.

You can use any USB-certied CD/DVD mass

storage device or a USB ash drive for installing

upgrades and for system recovery.

Note: External CD/DVD drives must be externally

powered.

External USB CD/DVD drive or USB ash drive

You can remotely manage the platform by connecting

to a serial console terminal server through the console

port.

Important: In the event that network access is

impaired or not yet congured, the serial console

Serial console

might be the only way to access the unit. You should

perform all installations and upgrades using the

serial console, as these procedures require reboots,

in which network connectivity is lost temporarily.

You can use the default platform conguration if

you have a management workstation set up.

Management workstation on the same IP network as

the platform

Setting Up the i15000 Series Platform

Platform Installation

About installing the i15000 Series platform

After you have reviewed the hardware requirements and become familiar with the i15000 Series platform,

you can install the unit into a 19-inch rack.

Warning: Due to the weight of the platform, at least two people are required to install this chassis into a

rack. Failing to use two people can result in severe personal injury or equipment damage.

Important: Before you install this platform, review the environmental guidelines to make sure that you are

installing the platform into a compatible rack and in the appropriate environment.

Note: F5 recommends that you keep all original packaging, in case you need to repackage and ship the

platform later.

About the quick-install rails

The quick-install rails are optimized for installation into square hole cabinets, but can be installed in other

cabinet styles, such as round hole cabinets, using the screws provided. The rails are easily converted to

mount to either cabinet style.

Figure 5: Quick-install rails

For information about installing the platform using the quick-install rails, see the instruction guide provided

by the manufacturer, which is included with the rail hardware.

Caution: Be sure that the rotating mount brackets located on the ends of the rails are locked into place on

both sides of the platform when installing the quick-install rails.

After installing the platform, secure the chassis to the rack with the rail lock brackets that are provided.

Quick-install rail kit hardware

When you are installing with the quick-install rail kit, use these components.

HardwareQuantity

Quick-install rails2

#8-32 pan head screws, steel zinc2

#8-32 thumb screws (from rail kit)8

Rail lock brackets2

M3 x 8mm athead screws, black with patch

(threadlock) (for rail lock brackets)

Install the rail lock brackets

Be sure that the rails are installed onto the chassis before you install the rail lock brackets.

The rail lock brackets secure the platform to the rack when you are using the quick-install rail kit.

1. Use a #1 Philips screwdriver to attach the rail lock brackets to each side of the unit using two of the

black M3 x 8mm athead screws that are provided with the kit.

Use 5 inch-pounds (0.6 Newton-meters) of torque on these screws.

2. Slide the unit into the rack.

Warning: Due to the weight of the platform, at least two people are required to install this chassis into

a rack. Failing to use two people can result in severe personal injury or equipment damage.

3. Use a #2 Philips screwdriver to secure the rail lock brackets to the rack on each side of the unit using

one of the #8-32 pan head screws that are provided with the kit.

Use 14 to 16 inch-pounds (1.6 to 1.8 Newton-meters) of torque on these screws.

Platform Installation

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels F5 Matériel réseau

F5 iSeries Manuel utilisateur

F5 6900 Instructions de montage

F5 ARX-500 Manuel d'utilisation et d'entretien

F5 WANJet 500 Instructions de montage

F5 BIG-IP 11050 Manuel utilisateur

F5 8900 Instructions de montage

F5 BIG-IP 3900 Manuel utilisateur

F5 i5000 Series Instructions de montage

F5 WANJet 300 Manuel technique

F5 6900 Manuel utilisateur

F5 BIG-IP 1600 Instructions de montage

F5 ARX-500 Manuel

F5 WANJet 500 Manuel technique

F5 520 Manuel utilisateur

F5 ARX-4000 Manuel d'utilisation et d'entretien

F5 i4000 Series Instructions de montage

F5 Herculon SSL Orchestrator Manuel

Manuels Matériel réseau populaires d'autres marques

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuel utilisateur

Yudor

Yudor YDS-16 Manuel utilisateur

D-Link

D-Link ShareCenter DNS-320L Manuel utilisateur

Samsung

Samsung ES1642dc Instructions d'utilisation

Honeywell Home

Honeywell Home LTEM-PV Instructions de montage

evertz

evertz 7700 Series Manuel utilisateur

D-Link

D-Link ShareCenter DNS-343 Manuel utilisateur

Asante

Asante AsanteBridge 1012 Manuel utilisateur

FireBrick

FireBrick FB2700 Manuel utilisateur

Audiovox Electronics

Audiovox Electronics ARWH2T Manuel utilisateur

ADC

ADC DSX-1 Manuel

NetComm

NetComm NF2 Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 5620 Manuel utilisateur

Dell EMC

Dell EMC XC6420 Series Manuel utilisateur

Lanner

Lanner NCA-1020A Manuel utilisateur

Allied Telesis

Allied Telesis AT-TN121-A Manuel utilisateur

Arista

Arista CCA-ETM-Q12 Manuel utilisateur

F5 i15000 Series Instructions d'utilisation

Manuels Matériel réseau populaires d'autres marques