f
Operations for which the power tool
was not designed may create a hazard and cause
f -
attached to your power tool, it does not assure safe
f
f
Incorrectly sized accessories can-
f
Accessories that do not
match the mounting hardware of the power tool
will run out of balance, vibrate excessively and may
f-
-
long, the mounted wheel may become loose and
f
-
Damaged acces-
f -
-
The eye pro-
f
-
f
-
Cutting accessory con-
of the power tool “live” and could give the operator
f-
The reaction torque of the motor,
as it accelerates to full speed, can cause the tool to
f
dowel rods, pipes or tubing have a tendency to roll
while being cut, and may cause the bit to bind or
f-
If you lose control of the power tool, the cord
may be cut or snagged and your hand or arm may
f-
The spinning
accessory may grab the surface and pull the power
f-
-
Loose adjustment devices can unexpectedly
shift, causing loss of control, loose rotating compo-
f
Accidental contact with the spinning
accessory could snag your clothing, pulling the ac-
fThe
motor’s fan will draw the dust inside the housing
and excessive accumulation of powdered metal
f
f-
-
f
snagged rotating wheel, sanding band, brush or
rapid stalling of the rotating accessory which in turn
causes the uncontrolled power tool to be forced in
that is entering into the pinch point can dig into
the surface of the material causing the wheel to
toward or away from the operator, depending on
direction of the wheel’s movement at the point of
f-
-
English | 9
www.ffgroup-tools.com
DG 500 PLUS
