Ezviz A1 Manuel utilisateur
1
Operations
Step 1
Preparation
Make sure the following power and environmental requirements are met:
•Power voltage: DC 5V (Micro USB)
•Working temperature: -10°C to 55°C (14°F to 131°F)
•Working humidity: 10% to 90% (non-condensing)
1Starting Alarm Hub
Connect the power adapter to the Alarm Hub using the USB data cable. Plug in the power adapter
to a power socket (or outlet). The white indicator turns on indicating the Alarm Hub is starting, and
then the red indicator turns on when the Alarm Hub is completely powered on.
2Installing the EZVIZ App
- Connect your mobile phone to a Wi-Fi or mobile network.
- Download and install the EZVIZ app by searching the “EZVIZ” in App Store (iOS version) and Google
PlayTM (Android version).
- Start the app and register for an EZVIZ user account following the start-up wizard.
Power Socket
Power Adapter
USB Data Cable
2
Step 2
Quick Settings
1Adding Alarm Hub
- Connect the mobile phone to the 2.4GHz Wi-Fi network.
- Log into the EZVIZ app and scan the QR code on the Alarm Hub to add it to your EZVIZ account.
- Follow the prompts to configure the Alarm Hub Wi-Fi connection.
•Make sure the mobile phone is connected to the 2.4GHz Wi-Fi network and the is not
connected to any Wi-Fi network, or the connection fail.
•For best result, place your phone no more than 2ft. from the Alarm Hub during the adding
process.
2Completing Configuration
Once the Alarm Hub has successfully connected to the Wi-Fi network, the yellow indicator starts to
blink and a voice prompt "Wi-Fi connected" will be heard from the Alarm Hub.
Press and hold the Alarm Hub Setting button to change or re-configure its Wi-Fi connection.
Complete the configuration using the EZVIZ app.
3
Step 3
Adding Detectors
1Enabling the Adding Detectors Mode
Enable the adding detector mode by quickly pressing the Setting button of the Alarm Hub. The
yellow and red indicators will start to blink. Follow voice prompt.
2Adding Detectors
Bring the detector close to the Alarm Hub (within 2ft) and then press the detector's alarm button
to start the adding process. A voice prompt stating the type and the serial number of the detector
being added (up to 32 detectors are allowed).
……
3Disabling the Adding Detectors Mode
Press the Setting Button again to disable the Adding Detectors Mode after all the detectors are
added.
•The Adding Detectors Mode will be disabled if no operation occurs within 3 minutes.
•The maximum distance between the detectors and the Alarm Hub varies up to 300ft.
4
Appendix
Box Contents
Alarm Hub x1 Remote Control x1 USB Data Cable x1
Quick Start Guide x1 Power Adapter x1
(Power adapter type may vary according to countries.)
Functionality
Irreplaceable Home Guard
Accessible to various EZVIZ wireless detectors and provide a comprehensive protection to
your home.
World’s leading Communication Technology
Convenient security deployment with wireless detectors.
Convenient Network Configuration
One-push Wi-Fi connection (supports ONLY 2.4GHz Wi-Fi).
EZVIZ Cloud P2P Service
Receives and controls alarms on mobile phone and PC.
5
Alarm Hub Basics
Name Description
Power Input Power supply for the device (by USB port).
ALARM LED Indicator Steady Red: The Alarm Hub is in the normal status.
Red Flicker: An alarm occurs.
LINK LED Indicator Yellow Flicker:The Wi-Fi is connected.
Unlit: The Wi-Fi is disconnected.
READY LED Indicator Steady White: The Alarm Hub is powered on (by USB port).
Mounting Hole Hole for hanging the device.
RESET Button Connect the device to the power supply (by USB port). Press and hold the RESET
button with a needle and release until the 3 indicators flicker at the same time
for once. The device restarts and all settings are restored except the connected
detectors and remote control.
Setting Button
Power Input
Speaker
Mounting Hole
RESET Button
LED Indicators
(ALARM, LINK,and READY)
6
Remote Control Basics
Name Description
LED Indicator Flicker when any button is pressed.
Hold down the button for 2 s to send an emergency alarm to the EZVIZ platform.
If anyone is at home or you are going to enter the house, you need to disarm the alarm
system. Press the button to activate the At-Home mode.
When you are at home and still want to feel protected: only the perimeter parts of the
house (doors and windows) are armed. The Sleeping mode is appropriate during the
day or at night. Press the button to activate the Sleeping mode.
If no one is at home, you need to activate the alarm system to protect it from
intruders. The Leaving-Home mode is appropriate. Press the button to activate the
Leaving-Home mode.
Press to turn off the voice prompts.
•The remote control in the package is connected to the A1 by default. Refer to step 3 in the
Operation to connect another remote control to the Alarm Hub if the remote control does not
work normally or you have a new one.
•The above descriptions for arming mode are the default settings. You can customize the
detectors arming status in each arming mode and switch the arming mode in the EZVIZ app.
Emergency Button
At-Home Mode
LED Indicator
Mute
Leaving-Home Mode
Sleeping Mode
7
Troubleshooting
Q: “The device is offline.” or “The device is not registered.” prompts when adding Alarm Hub by EZVIZ
app.
A: 1. Check the Wi-Fi is connected with the Alarm Hub and make sure it’s working.
2. Check whether the yellow indicator flickers; if not, please restart the Alarm Hub and connect to
the Wi-Fi again.
Q: The mobile phone does not detect the alarm when the Alarm Hub is online and alarm occurs.
A: 1. Make sure the EZVIZ app is running on your mobile phone.
2. For Android OS mobile phone, make sure the app is running in the background; and for the iOS,
enable the message push function in “Settings > Notification”.
Q: The status of the detector is displayed as offline on the EZVIZ app.
A: 1. Make sure the Wi-Fi status that the Alarm Hub connected with is normal.
2. Make sure the distance between the detectors and the Alarm Hub is less than 100m and no
barrier is allowed.
3. Make sure the detector’s battery has not been depleted.
Q: The detector can detect the alarm and the Alarm Hub works normally, but no voice prompts.
A: 1. Make sure the distance between the detector and the Alarm Hub is less than 100m and no
barrier is allowed.
2. Adjust the installation position of the Alarm Hub. You’re recommended to install the Alarm Hub
in the center of your house.
3. Make sure the Alarm Hub is not in Mute mode.
8
Funciones
Paso 1
Preparación
Asegúrese de que el entorno y la fuente de alimentación cumplan los requisitos siguientes:
•Voltaje de fuente de alimentación: DC 5 V (Micro USB)
•Temperatura de trabajo: De -10°C a 55°C (de 14°F a 131°F)
•Humedad de trabajo: De 10% a 90% (sin condensación)
1Inicio del Concentrador de Dispositivos de Alarma
Conecte el Concentrador de Dispositivos de Alarma y el adaptador de corriente con el cable de datos
USB y, a continuación, enchufe el adaptador de corriente a la toma de corriente. El indicador blanco
se encenderá, lo que indica que el Concentrador de Dispositivos de Alarma se está iniciando. Cuando
el Concentrador de Dispositivos de Alarma se haya iniciado completamente, el indicador se volverá
rojo.
2Instalación de la aplicación EZVIZ
- Conecte el teléfono móvil a la red Wi-Fi.
- Descargue la Aplicación Móvil EZVIZ buscando "EZVIZ" en App Store (versión iOS) y Google PlayTM
(versión Android).
- Inicie la aplicación y regístrese para obtener una cuenta de usuario de EZVIZ mediante el asistente
de inicio.
Toma de corriente
Adaptador de corriente
Cable de datos USB
Autres manuels pour A1
4
Table des matières
Langues :
Autres manuels Ezviz Domotique
