Extron electronics SSP 7.1 Manuel utilisateur

SSP 7.1 Setup Guide

68-1339-50

Rev. A

05 09

The Extron®SSP 7.1 is a 7.1 channel Surround Sound processor

with four digital inputs and one analog input. The unit accepts a

range of source formats and uses various listening mode options

for use in 5.1 to 7.1 surround sound system conﬁgurations.

The listening mode determines which audio signals will be passed

to the speakers. Each combination of source format and speaker

conﬁguration has a default listening mode. The default listening

mode can be overridden by the front panel controls and the SSP 7.1

Windows®Control Program (WCP) to select a mode that matches

the requirements of the room and the listener's personal preferences.

This guide provides basic instructions for an experienced installer to install and perform the initial conﬁguration

on the SSP 7.1. For further details, see the SSP 7.1 User's Manual on the Extron Web site (www.extron.com).

SSP 7.1 Installation

Use the four rubber feet provided with the SSP 7.1, and place the unit on any convenient ﬂat surface. The SSP 7.1

can also be mounted in a rack, with the optional rack-mounting kit (RSU 126: Part # 60-190-10), or under furniture,

with the optional under-furniture mounting kit (MBU 125: Part # 70-077-01). For complete instructions on

mounting the unit, consult the SSP 7.1 User's Manual, which is available on the Extron Web site (www.extron.com).

SSP 7.1 Front and Rear Panel Features

aConﬁg Port

bInput Source Format Indicator

cMode Override Selector

dInput Selections

eVolume Adjust Knob and LED Bar /Analog

Input Gain Level Control and LED Bar

fAC Power Input

gAudio Inputs

hAudio Outputs

iRS-232 Port

SSP 7.1 Cable Connectons

1. The SSP 7.1 uses an IEC power cable to connect to a 100 - 240 VAC, 50/60 Hz, power source.

2. The SSP 7.1 accepts four digital inputs and one analog input:

Inputs 1 and 2 accept digital signals through S/PDIF optical cables.•

Inputs 3 and 4 accept digital signals through S/PDIF coaxial cables.•

Input 5 accepts a balanced or unbalanced, stereo or mono analog input through a 5-pin captive screw•

connector.

3. The SSP 7.1 outputs are balanced/unbalanced, line level, analog signals that feed into multi-channel

ampliﬁers for conﬁgurations up to 7.1 surround sound. See the wiring card (included) to ensure correct

connections to the SSP 7.1.

4. Connect the front panel Conﬁg port or rear panel RS-232 port to a PC that has the SSP 7.1 WCP installed (see

SSP 7.1 Windows Control Program Installation, on the next page).

1Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-D symbol are

trademarks of Dolby Laboratories.

2 Manufactured under license under U.S. Patent #'s 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535;

7,003,467 & other U.S. and worldwide patents issued & pending. DTS, DTS Digital Surround, ES, and Neo:6 are

SSP 7.1

SURROUND SOUND PROCESSOR

1 2 3 4 5

CLIP

INPUTS

MODE OVERRIDE

TO ALL

PL II/IIx

DOWNMIX

DTS NEO:6

2-CH

PCM

DTS

SOURCE

CONFIG

VOLUME

4 5

100-240V .5A

50-60Hz INPUTS

DIGITAL

OUTPUTS SSP 7.1

ANALOG

FRONT CENTER SIDE BACK RS-232

Tx Rx

SUB

WOOFER

LRLRLRLR

Extron USA - West

Headquarters

+800.633.9876

Inside USA / Canada Only

+1.714.491.1500

+1.714.491.1517FAX

Extron USA - East

+800.633.9876

Inside USA / Canada Only

+1.919.863.1794

+1.919.863.1797FAX

Extron Europe

+800.3987.6673

Inside Europe Only

+31.33.453.4040

+31.33.453.4050 FAX

Extron Asia

+800.7339.8766

Inside Asia Only

+65.6383.4400

+65.6383.4664 FAX

Extron Japan

+81.3.3511.7655

+81.3.3511.7656FAX

Extron China

+400.883.1568

Inside China Only

+86.21.3760.1568

+86.21.3760.1566 FAX

Extron Middle East

+971.4.2991800

+971.4.2991880 FAX

SSP 7.1 Setup Guide, Cont'd

SSP 7.1 Windows Control Program Installation

Install the SSP 7.1 WCP on a PC running Microsoft®Windows 2000, or later. For full details about computer

requirements, see the SSP 7.1 User's Manual on the Extron Web site (www.extron.com).

Insert the disk provided into the computer's CD/DVD drive. The disk should open automatically. If it does not,

open it from "My Computer". Select the Software tab, locate the program, click Install, and follow the on screen

instructions.

The program can also be downloaded from the Extron Web site (www.extron.com) by clicking on the Download

tab, selecting Software from the list at the left of the screen, and locating the program. Click on Install and follow

the on screen instructions.

By default, the program is installed in the folder C:\Program Files\Extron\SSP7.1 and an icon may be placed on

the computer's desktop.

SSP 7.1 Windows Control Program Conﬁguration

The SSP 7.1 is "Plug and Play" for a 5.1 speaker setup. When the unit is

connected to power, an audio source, and speakers, it produces an audio output

that corresponds to the default listiening mode for the current combination

of source format and speaker conﬁguration. If a different listening mode or

speaker conﬁguration is required, change it through the SSP 7.1 WCP.

1. Ensure the control computer is connected to the Conﬁg port or RS-232 port

of the SSP 7.1.

2. The program opens with the Communications dialog box (shown in the

ﬁgure at right). Select the RS-232 tab.

3. If necessary, change the computer port and baud rate.

4. Click on Connect.

5. The program opens with the Main Tab

selected (shown in the ﬁgure at right).

There are a total of six tabs (Main, Speaker

Distance, Speaker Conﬁguration, Listening

Mode, Setup, and Advanced).

NThe order of the tabs provides a logical

sequence for conﬁguring the SSP 7.1.

Extron recommends that each tab is

conﬁgured in the order it appears at the top

of the screen.

The Main Tab recreates all the features found on

the front panel of the SSP 7.1. The remaining

panels allow the speakers and listening mode to

be conﬁgured. Full details about using the SSP 7.1

WCP can be found in the the SSP 7.1 User's

Manual on the Extron Web site

(www.extron.com) or in the program's Help File.

Autres manuels pour SSP 7.1

Table des matières

Autres manuels Extron electronics Équipement d'enregistrement

Extron electronics

Extron electronics 12G HD-SDI 101 Manuel utilisateur

Extron electronics

Extron electronics Converter CVC 200 Manuel utilisateur

Extron electronics

Extron electronics KNX 100G Manuel utilisateur

Extron electronics

Extron electronics RGB 190F Manuel utilisateur

Extron electronics

Extron electronics AXI 02 AT Manuel utilisateur

Extron electronics

Extron electronics IPL T S Series Manuel utilisateur

Extron electronics

Extron electronics TouchLink TLSI 201 Manuel utilisateur

Extron electronics

Extron electronics RGB 112xi Manuel utilisateur

Extron electronics

Extron electronics Interfaces RGB 500 Series Manuel utilisateur

Extron electronics

Extron electronics RGB 560 AKM Manuel utilisateur

Extron electronics

Extron electronics DMP 128 Plus Manuel utilisateur

Extron electronics

Extron electronics VNR 100 Manuel utilisateur

Extron electronics

Extron electronics CIA111 Manuel utilisateur

Extron electronics

Extron electronics RGB 103 Manuel utilisateur

Extron electronics

Extron electronics SSP 7.1 Manuel utilisateur

Extron electronics

Extron electronics Feedback Loop Isolator FBI 100 Manuel utilisateur

Extron electronics

Extron electronics CIA111 Manuel utilisateur

Extron electronics

Extron electronics RGB 580xi AAP Manuel utilisateur

Extron electronics

Extron electronics RGB 109xi Manuel utilisateur

Extron electronics

Extron electronics RWM 1 Manuel utilisateur

Extron electronics

Extron electronics RAC 104 Manuel utilisateur

Extron electronics

Extron electronics StudioStation 100 Manuel utilisateur

Extron electronics

Extron electronics SSP 7.1 Manuel utilisateur

Extron electronics

Extron electronics IPL T S1 Manuel utilisateur

Manuels Équipement d'enregistrement populaires d'autres marques

KV2 Audio

KV2 Audio 500 Series Manuel utilisateur

Robotics Technologies

Robotics Technologies microBus-Cam II Manuel utilisateur

Seca

Seca 460 Manuel utilisateur

Cognex

Cognex MVS-8000 Series Manuel utilisateur

Mect

Mect MPNC006 Series Manuel utilisateur

Bad Caf

Bad Caf THE LEASH Manuel utilisateur

Strymon

Strymon NIGHTSKY Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Manuel utilisateur

Tews Technologies

Tews Technologies TPMC465 Manuel utilisateur

Honeywell

Honeywell Excel 50 Manuel utilisateur

SeaLevel

SeaLevel COMM+8.LPCI Manuel utilisateur

Arturia

Arturia AUDIOFUSE STUDIO Manuel utilisateur

Rukra

Rukra RK-1240 Manuel utilisateur

Samson

Samson SCOM Manuel utilisateur

Dynacord

Dynacord DPS260 Manuel utilisateur

Nice

Nice Core Manuel utilisateur

Pyle Pro

Pyle Pro PSS8 Manuel utilisateur

RF-System

RF-System TinyGate Manuel d'utilisation et d'entretien