Extreme Networks Summit 200-24 Manuel
Extreme Networks, Inc.
3585 Monroe Street
Santa Clara, California 95051
(888) 257-3000
http://www.extremenetworks.com
Consolidated “e” Series
Hardware Installation Guide
Published: September 22, 2004
Part number: 123010-00 Rev 01
2
Alpine, Altitude, BlackDiamond, EPICenter, Ethernet Everywhere, Extreme Ethernet Everywhere, Extreme Networks,
Extreme Turbodrive, Extreme Velocity, ExtremeWare, ExtremeWorks, GlobalPx Content Director, the Go Purple Extreme
Solution Partners Logo, ServiceWatch, Summit, the Summit7i Logo, and the Color Purple, among others, are trademarks
or registered trademarks of Extreme Networks, Inc. or its subsidiaries in the United States and other countries. Other
names and marks may be the property of their respective owners.
© 2004 Extreme Networks, Inc. All Rights Reserved.
Specifications are subject to change without notice.
For safety compliance information, see Appendix A.
A
uthors: Jeanine Healy, Richard Small
P
roduction: Jeanine Healy
Consolidated "e" Series Hardware Installation Guide 3
Contents
Preface
Introduction 7
Conventions 8
Related Publications 8
About This Guide 9
How To Use This Guide 9
Part 1 Preparing for Installation
Chapter 1 Overview of the “e” Series of Switches
Summit “e” Series and Models 13
Summit 200 Features 13
Summit 300 Features 15
Summit 400 Features 16
Port Connections 18
Following Safety Information 18
Software Images 19
Full-Duplex Support 19
Chapter 2 Site Preparation
Planning Your Site 22
Step 1: Meeting Site Requirements 22
Step 2: Evaluating and Meeting Cable Requirements 22
Step 3: Evaluating and Meeting Mini-GBIC Requirements 22
Step 4: Meeting Power Requirements 22
Meeting Site Requirements 22
Operating Environment Requirements 22
4Consolidated "e" Series Hardware Installation Guide
Rack Specifications and Recommendations 25
Evaluating and Meeting Cable Requirements 27
Cabling Standards 27
Cable Labeling and Record Keeping 28
Installing Cable 28
Evaluating and Meeting Mini-GBIC Requirements 31
Mini-GBIC Types and Specifications 31
Long Range Mini-GBIC System Budgets 32
RJ-45 Connector Jackets 33
Radio Frequency Interference 34
Making Network Interface Cable Connections 34
Meeting Power Requirements 34
Power Supply Requirements 35
AC Power Cable Requirements 35
Uninterruptable Power Supply Requirements 36
Applicable Industry Standards 37
Part 2 Switch Overview
Chapter 3 Summit 200 Series Switch Overview
Summit 200 Series Switches 41
Summit 200 Switch Front View 41
Summit 200 Switch Rear View 42
Summit 200 Switch LEDs 43
Console Port 44
Port Connections 44
Summit 200 Automatic Failover 44
Full-Duplex 46
Chapter 4 Summit 300 Switch Overview
Summit 300 Series Switches 47
Summit 300-24 Switch 47
Summit 300-24 Front View 47
Summit 300-24 Switch LEDs 48
Summit 300-48 switchConsole Port 49
Port Connections 49
Summit 300-24 RearSummit 300-48 switch View 50
Redundant Power Supply 51
Summit 300-48 Switch 51
Summit 300-48 Front View 51
LED Behavior 52
Consolidated "e" Series Hardware Installation Guide 5
Console Port 53
Port Connections 53
Summit 300 Automatic Failover 53
Summit 300-48 Rear View 54
Load Sharing Power Supplies 55
Chapter 5 Summit 400-48t Switch Overview
Summit 400-48t Switch 57
Summit 400 Front View 57
Summit 400 Rear View 58
Summit 400 Switch LEDs 59
Port Connections 61
Uplink Redundancy 61
Part 3 Switch Installation
Chapter 6 “e” Switch Installation
Installing the Switch 65
Rack Mounting 66
Removing the Switch from a Rack 67
Free-Standing 67
Desktop Mounting of Multiple Switches 67
Installing or Replacing a Mini-Gigabit Interface Connector (Mini-GBIC) 67
Removing and Inserting a Mini-GBIC 68
Connecting Equipment to the Console Port 69
Powering On the SwitchSummit 300-48 switch 70
Checking the InstallationSummit 300-48 switch 70
Logging In for the First Time 71
Part 4 Accessory Installation
Chapter 7 Summit 300 Optional Features
External Power Supply (45019) 75
Rack-mounting the EPS-LD unit 76
Connecting the EPS-LD unit 77
Removing an EPS-LD unit 79
Internal 600 Watt Power Supply (15412) 79
Removing and Installing Summit 300-48 Power Supplies 80
Installing and Removing Power Cable Retaining Brackets 82
Removing the Power Cable Retaining Bracket 84
6Consolidated "e" Series Hardware Installation Guide
Internal Power Supply Technical Specifications 84
LED Visual Indicators 84
Environmental and Safety Specifications 86
Chapter 8 Summit 400-48t Optional Features
Installing Optional Features 89
Installing the Summit XEN Card 89
Installing the External Power System 91
Rack Mounting the EPS-T 92
Adding a second EPS-160 to the EPS-T 94
Removing an EPS-160 from the EPS-T 95
Part 5 Appendixes
Appendix A Safety Information
Important Safety Information 99
Power 99
Power Cable 100
Optical Safety 100
Lithium Battery 101
Appendix B “e” Series Technical Specifications
Common Switch Specifications 103
Summit 200 Series Switch Specifications 105
Summit 300 Series Switch Specifications 106
Summit 400 Series Switch Specifications 107
Index
Consolidated "e" Series Hardware Installation Guide 7
Preface
This preface provides an overview of this guide, describes guide conventions, and lists other
publications that might be useful.
NOTE
To ensure proper operation of your Extreme Networks equipment, read this guide before you install any
Extreme Networks equipment.
Introduction
This guide provides the required information to install an Extreme Networks®Summit™ switch. It also
contains information about site location, switch functionality, and switch operation.
This guide is intended for use by network administrators who are responsible for installing and setting
up network equipment. It assumes a basic working knowledge of:
•Local Area Networks (LANs)
•Ethernet concepts
•Ethernet switching and bridging concepts
•Routing concepts
•Simple Network Management Protocol (SNMP)
See the ExtremeWare Software User Guide for information about configuring an Extreme Networks switch.
NOTE
If the information in the Release Notes that shipped with your switch differs from the information in this
guide, follow the Release Notes.
8Consolidated "e" Series Hardware Installation Guide
Preface
Conventions
Table 1 and Table 2 list conventions used throughout this guide.
Related Publications
The Extreme Networks switch documentation set includes:
•Consolidated “e” Series Hardware Installation Guide (this guide)
•ExtremeWare Software User Guide
•ExtremeWare Software Command Reference Guide
•ExtremeWare Release Notes
Table 1: Notice icons
Icon Notice Type Alerts you to...
Note Important features or instructions.
Caution Risk of personal injury, system damage,
or loss of data.
Warning Risk of severe personal injury.
Table 2: Text conventions
Convention Description
Screen displays This typeface represents information as it appears on the screen,
or command syntax.
Screen displays bold This typeface represents commands that you type.
The words “enter”
and “type” When you see the word “enter” in this guide, you must type
something, and then press the Return or Enter key. Do not press
the Return or Enter key when an instruction simply says “type.”
[Key] names Key names appear in text in one of two ways:
•Referenced by their labels, such as “the Return key” or “the
Escape key”
•Written with brackets, such as [Return] or [Esc]
If you must press two or more keys simultaneously, the key names
are linked with a plus sign (+). Example:
Press [Ctrl]+[Alt]+[Del].
Words in italicized type Italics emphasize a point of information or denote new terms at the
place where they are defined in the text.
About This Guide
Consolidated "e" Series Hardware Installation Guide 9
Documentation for Extreme Networks products is available from the Extreme Networks website at the
following location:
http://www.extremenetworks.com/services/documentation/
You can select and download the following Extreme Networks documentation from the Documentation
section of the Services page:
•Release Notes (you must have a valid service contract to access the release notes)
•Software User Guides
•Hardware User Guides
•White Papers
•Troubleshooting Tools
•Preventative Maintenance
•Instructional Videos
•Archives
About This Guide
This guide describes how to prepare your site and how to install, maintain, and operate your Extreme
Networks switch. It contains information on features that are common to all switches, as well as
switch-specific features. This guide contains six parts:
•Preparing for Installation—Describes the “e” series of Summit switches. This section introduces the
Summit 200, Summit 300 and Summit 400 models that comprise the “e” series. It also describes how
to evaluate, plan, and determine the best location for your Extreme Networks switch.
•Switch Overview—Describes the physical characteristics of each of the “e” series, including the front
view, rear view, and LED behaviors.
•Switch Installation—Describes the installation process that is shared by the “e” series of Summit
switches. This section describes rack installation, mini-GBIC installation, connecting to the console
port and installation verification. It also includes the procedure for logging into the switch for the
first time.
•Accessory Installation:
—Summit 200—Describes the optional features and their installation that are specific to the
Summit 200 switch.
—Summit 300—Describes the optional features and their installation that are specific to the
Summit 300 switch.
—Summit 400—Describes the optional features and their installation that are specific to the
Summit 400-48t switch.
•Appendixes—Describes safety requirements and technical specifications.
How To Use This Guide
Each chapter of this guide contains information on how to successfully operate your Extreme Networks
switch. The model-specific chapters contain information that is applicable to that Summit switch only.
All other chapters are applicable to any Extreme Networks switch.
10 Consolidated "e" Series Hardware Installation Guide
Preface
Switch-Specific Information
For switch-specific information, be sure to read the applicable model-specific chapter. For example, if
you have a Summit 400-48t switch and you need to set up a combination port, “Uplink Redundancy”
on page 61 for specific details for cabling combination ports.
Common Information
For items applicable to any Extreme Networks switch, make sure you read the appropriate chapter. For
example, to learn how to prepare your site for installing your Extreme Networks equipment, see
Chapter 2, “Site Preparation.”
This guide also contains appendices that describe:
•Switch safety issues
•Switch specifications
Appendix A, “Safety Information” describes important safety issues such as power, power cables, and
fuses.
Appendix B, ““e” Series Technical Specifications” is organized according to the model of Summit
switch. This appendix describes switch specifications such as physical dimensions, weight, certifications,
and power supply parameters.
Information that is common to all switches is described at the beginning of the appendix.
Autres manuels pour Summit 200-24
1
Ce manuel convient aux modèles suivants
4
Table des matières
Autres manuels Extreme Networks Changer
Extreme Networks
Extreme Networks VSP 4900 Series Manuel
Extreme Networks
Extreme Networks Alpine 3802 Manuel
Extreme Networks
Extreme Networks 200 Series Manuel utilisateur
Extreme Networks
Extreme Networks Summit X460-24t Manuel utilisateur
Extreme Networks
Extreme Networks ExtremeSwitching VDX 6740 Manuel
Extreme Networks
Extreme Networks ExtremeSwitching SLX 9030 Series Manuel
Extreme Networks
Extreme Networks Summit X250e Series Manuel utilisateur
Extreme Networks
Extreme Networks ExtremeSwitching SLX 9540 Manuel
Extreme Networks
Extreme Networks Summit X150 Series Manuel utilisateur
Extreme Networks
Extreme Networks Summit Summit1i Manuel
Extreme Networks
Extreme Networks Summit X150 Series Manuel d'installation et d'exploitation
Extreme Networks
Extreme Networks Alpine 3804 Manuel utilisateur
Extreme Networks
Extreme Networks 59100 Series Manuel utilisateur
Extreme Networks
Extreme Networks ExtremeSwitching SLX 9140 Manuel
Extreme Networks
Extreme Networks X690-48t-2q-4c Manuel utilisateur
Extreme Networks
Extreme Networks Summit Summit48si Manuel utilisateur
Extreme Networks
Extreme Networks Summit Summit4 Manuel
Extreme Networks
Extreme Networks VSP 4450GSX-PWR+ Manuel utilisateur
Extreme Networks
Extreme Networks X460-G2 Series Manuel d'installation et d'exploitation
Extreme Networks
Extreme Networks Summit WM200 Manuel utilisateur
