Extreme Networks BlackDiamond X8 Series Instructions de montage

BlackDiamond X8 Series

Switches Hardware Installation

Manual

AccessAdapt, Alpine, Altitude, BlackDiamond, Direct Attach, EPICenter, ExtremeWorks Essentials,

Ethernet Everywhere, Extreme Enabled, Extreme Ethernet Everywhere, Extreme Networks,

Extreme Standby Router Protocol, Extreme Turbodrive, Extreme Velocity, ExtremeWare,

ExtremeWorks, ExtremeXOS, Go Purple Extreme Solution, ExtremeXOS ScreenPlay, ReachNXT,

Ridgeline, Sentriant, ServiceWatch, Summit, SummitStack, Triumph, Unified Access Architecture,

Unified Access RF Manager, UniStack, XNV, the Extreme Networks logo, the Alpine logo, the

BlackDiamond logo, the Extreme Turbodrive logo, the Summit logos, and the Powered by

ExtremeXOS logo are trademarks or registered trademarks of Extreme Networks, Inc. or its

subsidiaries in the United States and/or other countries.

sFlow is the property of InMon Corporation.

iBooks is property of Apple, Inc.

Specifications are subject to change without notice.

All other registered trademarks, trademarks, and service marks are property of their respective

owners.

Part number: 120729-00 Rev. 2

Table of Contents

Trademarks 0

Preface 5

Audience 5

Conventions 5

Related Publications 6

Chapter 1: BlackDiamond X8 Series Switches 7

Switch Overview 7

BlackDiamond X8 Chassis Features 7

Management Ports 9

Chapter 2: BlackDiamond X8 Series Modules and Fans 11

Module Overview 11

Management Module 12

I/O Modules 15

Fabric Modules 19

Fan Trays 20

Chapter 3: Overview of Power Supplies 22

AC Power Supply 22

Chapter 4: Site Preparation 24

Plan Your Site 24

Meet Site Requirements 24

Evaluate and Meet Cable Requirements 29

Meet Power Requirements 33

Applicable Industry Standards 36

Chapter 5: Installing a BlackDiamond X8 Series Chassis 37

Unpacking the Chassis 37

Pre-Installation Requirements 41

Rack-Mount the Chassis 41

Ground the Chassis 44

Install Power Supplies 45

Connect Power 48

Chapter 6: Installing BlackDiamond X8 Series Modules 50

Installation Order 50

Required Tools 50

Install Fabric Modules 50

Install Management Modules 54

Install I/O Modules 56

Initial Management Access 59

Chapter 7: BlackDiamond X8 Maintenance Procedures 62

Replace a Power Supply 62

Replace a Fan Tray 65

Replace a Fabric Module 67

Replace a Management Module 73

Reseating a management module DIMM 81

Pack the Chassis for Shipping 85

BlackDiamond X8 Series Switches Hardware Installation Manual 3

Chapter 8: Safety Information 91

Considerations Before Installing 91

Maintenance Safety 92

General Safety Precautions 92

Cable Routing for LAN Systems 93

Installing Power Supply Units and Connecting Power 93

Selecting Power Supply Cords 95

Battery Replacement and Disposal 95

Fiber Optic Ports and Optical Safety 95

Sicherheitshinweise 96

Überlegungen vor der Installation 97

Allgemeine Sicherheitshinweise 98

Sicherheit bei Wartungsarbeiten 98

Kabelverlegung für LAN-Systeme 98

Installation der Netzteile und Netzanschluss 99

Auswahl der Netzkabel 101

Wechseln und Entsorgen der Batterie 101

LWL-Ports und optische Sicherheit 102

Chapter 9: Technical Specifications 103

BlackDiamond X8 Switch 103

Modules for BlackDiamond X8 Switches 105

Power Supplies for BlackDiamond X8 Switches 106

Connector Pinouts 107

Conformity Statements for EMC Class A 109

Index 111

Table of Contents

BlackDiamond X8 Series Switches Hardware Installation Manual 4

Preface

This guide provides the instructions and supporting information needed to install the Extreme

Networks® BlackDiamond®X8 series switch.

The guide includes information about site preparation and switch functionality.

Audience

This guide is intended for use by network administrators responsible for installing and setting up

network equipment.

This guide assumes a basic working knowledge of:

•Local area networks (LANs)

•Ethernet concepts

•Ethernet switching and bridging concepts

•Routing concepts

•Simple Network Management Protocol (SNMP)

•Basic equipment installation procedures

See the ExtremeXOS Concepts Guide and the ExtremeXOS Command Reference Guide for information

about configuring the BlackDiamond X8 series switch.

Note

If the information in an installation note or release note shipped with your Extreme Networks

equipment differs from the information in this guide, follow the installation or release note.

Conventions

The following list conventions used throughout this guide.

Table 1: Notice Icons

Icon Notice Type Alerts you to...

Note Important features or instructions.

Caution Risk of personal injury, system damage, or loss of data.

Warning Risk of severe personal injury.

Table 2: Text Conventions

Convention Description

Screen displays This typeface represents information as it appears on the screen, or command

syntax.

Words in italicized type Italics emphasize a point of information or denote new terms at the place where

they are defined in the text.

Book titles are printed in italics.

Related Publications

The documentation set for Extreme Networks ExtremeXOS®switches and routers includes:

•ExtremeXOS Concepts Guide

•ExtremeXOS Command Reference Guide

•ExtremeXOS Release Notes

•BlackDiamond® 20800 Series Switches Hardware Installation Guide (legacy product)

•BlackDiamond 10808 Switch Hardware Installation Guide (legacy product)

•BlackDiamond 12800 Series Switches Hardware Installation Guide (legacy product)

•BlackDiamond 8800 Series Switches Hardware Installation Guide

•BlackDiamond X8 Series Switches Hardware Installation Guide (this guide)

•Summit Family Switches Hardware Installation Guide

•Extreme Networks E4G Series Routers Hardware Installation Guide

•Extreme Networks Pluggable Interface Modules Installation Guide

•ExtremeXOS Hardware and Software Compatibility Matrix

Hardware and software documentation for Extreme Networks products is available from the Extreme

Networks website. You can download software concepts guides and reference guides, hardware

installation guides, and other documents at: www.extremenetworks.com/go/documentation.

Under your product warranty or with a current support contract, you can access software release notes

and entitled software from the eSupport web pages at: http://www.extremenetworks.com/go/

eSupport/

Note

You must have an active support agreement or a product registered to you in order to

receive an eSupport login and access to Extreme Networks software release notes. To

request an eSupport user name and password, select the Request Web Login link on the

eSupport home page.

For instructions on accessing and downloading software and software release notes, see the Technical

Assistance Center User Guide at: www.extremenetworks.com/go/tacuserguide

You can see complete information about all of our services online at: www.extremenetworks.com/

solutions/service-solutions.aspx

BlackDiamond X8 Series Switches Hardware Installation Manual 6

1BlackDiamond X8 Series Switches

Switch Overview

BlackDiamond X8 Chassis Features

Management Ports

Switch Overview

The BlackDiamond X8 series switches are chassis-based switches designed for virtualized data centers

and high-performance compute cluster installations. They provide high-density, line rate 10/40 GbE

ports. For more information about configuring a BlackDiamond switch, see the ExtremeXOS Concepts

Guide and the ExtremeXOS Command Reference Guide.

The features of these switches include:

•I/O modules that are hot-swappable and provide 10-Gigabit fiber or copper ports, or 40-Gigabit

Ethernet fiber ports using SFP+ or QSFP+ optical modules

•Up to 768 line-rate 10-Gigabit Ethernet ports or 192 line-rate 40-Gigabit Ethernet ports in one

chassis

•Redundant management modules that provide the CPU control subsystem

•N+1 redundant switch fabric modules that provide the active switching fabric

•Redundant, load-sharing, hot-swappable power supplies

•Field-replaceable, hot-swappable fan trays

•20+ Tbps switching capacity

•1.28 Tbps bandwidth per slot

BlackDiamond X8 Chassis Features

The BlackDiamond X8 switch chassis has the following physical features:

•Height of 14.5 RU, allowing three switches to be installed in a 7-foot rack

•Optional mid-mount brackets for flexibility in rack positioning

•Horizontal front slots for I/O modules and management modules

•Eight full-width slots for IO modules

•Two half-width slots for management modules (MMs)

•Four vertical slots in the back (behind fan trays) for fabric modules (FMs)

•Eight bays in the front for redundant power supplies; rear-accessible power connections

•Five vertical fan trays at the back

•Two connectors for an ESD-preventive wrist strap

•On the front panel between the management modules

•On the back panel at the top right corner

The Front of the BlackDiamond X8 Chassis shows a BlackDiamond X8 chassis equipped with

management modules and I/O modules.

Figure 1: Front of the BlackDiamond X8 Chassis

1 = Power supply cover 3 = Management modules

2 = ESD jack 4 = I/O modules

The front of the chassis provides access to:

•Card cage for the management modules and I/O modules

•Bays for redundant power supplies, with ventilated cover

•Connection point for ESD-preventive strap

Back of the BlackDiamond X8 Chassis shows the back of the BlackDiamond X8 chassis.

BlackDiamond X8 Series Switches

BlackDiamond X8 Series Switches Hardware Installation Manual 8

Figure 2: Back of the BlackDiamond X8 Chassis

1 = Grounding point 3 = AC power input connectors

2 = ESD jack 4 = Fan trays

The back of the chassis provides access to:

•Eight AC power input connectors

•Five vertical fan trays

•Access to four fabric module slots behind the fan trays

•Connection point for ESD-preventive strap

•Attachment point for optional chassis ground

Management Ports

Each BlackDiamond management module (MM) has a 10/100/1000BASE-TX Ethernet management

port.

BlackDiamond X8 Series Switches

BlackDiamond X8 Series Switches Hardware Installation Manual 9

This port allows you to communicate directly with the central processing unit (CPU) of the switch. You

can plug an Ethernet cable directly from your laptop into the management port for direct access into

the switch. This access allows you to view and locally manage the switch configurations.

USB ports on the management module allow you to attach a single USB 2.0 flash drive. Only a USB

flash drive that is formatted using the file allocation table (FAT) file system is recognized on these

ports. Other devices, such as a USB external hard drive, will not be mounted.

BlackDiamond X8 Series Switches

BlackDiamond X8 Series Switches Hardware Installation Manual 10

Autres manuels pour BlackDiamond X8 Series

Table des matières

Autres manuels Extreme Networks Changer

Extreme Networks

Extreme Networks VSP 4450GSX-PWR+ Manuel utilisateur

Extreme Networks

Extreme Networks 8520 Series Manuel

Extreme Networks

Extreme Networks ExtremeSwitching SLX 9150 Manuel

Extreme Networks

Extreme Networks BlackDiamond 8806 Manuel

Extreme Networks

Extreme Networks BlackDiamond 8800 Series Manuel

Extreme Networks

Extreme Networks Summit 300-24 Manuel

Extreme Networks

Extreme Networks Summit X150 Series Manuel

Extreme Networks

Extreme Networks Summit X670-G2-72x Manuel utilisateur

Extreme Networks

Extreme Networks Summit X450-G2-24t-GE4 Manuel utilisateur

Extreme Networks

Extreme Networks Alpine 3804 Manuel utilisateur

Extreme Networks

Extreme Networks Summit Summit24 Manuel utilisateur

Extreme Networks

Extreme Networks Summit X430 Series Guide de démarrage rapide

Extreme Networks

Extreme Networks VSP 4450GSX-PWR+ Manuel utilisateur

Extreme Networks

Extreme Networks ExtremeSwitching 5320 Series Manuel

Extreme Networks

Extreme Networks Summit WM200 Manuel utilisateur

Extreme Networks

Extreme Networks Summit WM100 Manuel utilisateur

Extreme Networks

Extreme Networks Summit X250e Series Manuel utilisateur

Extreme Networks

Extreme Networks ExtremeSwitching Virtual Services Platform 4850GTS... Manuel utilisateur

Extreme Networks

Extreme Networks ExtremeAccess Series Manuel

Extreme Networks

Extreme Networks VSP 4900 Series Manuel

Extreme Networks

Extreme Networks Summit X670-G2 Series Manuel d'installation et d'exploitation

Extreme Networks

Extreme Networks BlackDiamond 10808 Manuel utilisateur

Extreme Networks

Extreme Networks Summit X650 Series Manuel utilisateur

Extreme Networks

Extreme Networks BlackDiamond 8806 Manuel

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur