Exterior Lights Litetower Series Manuel utilisateur

Litetower Path Light 240v

INSTRUCTIONS

WARNINGS

PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE COMMENCING ANY WORK

•This is a Class 1 product and must be earthed.

•This unit must be fitted by a competent and qualified electrician.

•Install in accordance with IEE wiring regulations and current Building Regulations

•To prevent electrocution, switch off mains supply before installing or maintaining this

fitting. Ensure other persons cannot restore the electrical supply without your

knowledge.

•This light fitting should be connected to a circuit with a 30Ma RCD fitted.

•If replacing an existing fitting, make a careful note of the connections.

•When changing the bulb, always switch off at the mains & allow the bulb to cool

before handling.

•All connections should be made as watertight as possible to avoid electrical shortage

•Always use the correct type & wattage of bulb. Never exceed the wattage stated.

•The unit may get warm whilst on for a period of time.

CLEANING:

Occasional cleaning and care is recommended for this product. Please refer

to our website for the best way to clean different materials.

Tel: 01689 606342

Email:sales@exteriorlights.co.uk

Materials: Anodised Aluminium & Frosted Glass

Voltage: 220-240v 50Hz

Max. Wattage: 35W

Lamp Fitting: ES / E27

Recommended Lamp: LED

IP Rating: IP65

Product Height: 400mm / 600mm / 800mm / 1000mm

Sensor: Photocell (Dusk to Dawn) OPTIONAL

✔✔✔

3 YEAR

GUARANTEE

see website for

more details

Full product range & more information: www.exteriorlights.co.uk

LTWR400 / LTWR600

LTWR400-PC / LTWR600-PC

LTWR800 / LTWR1000

LTWR800-PC / LTWR1000-PC

Producer Registration Number:

WEE/KC3440XY

INSTALLATION:

•A length of 240v 3 core cable is supplied. Junction box provided with Photocell

versions.

•Connect Earth Input wire to green / yellow terminal on the connection block

•Connect Live input wire to brown (L) terminal on the connection block

•Connect Neutral input wire to blue Neutral (N) terminal on the connection block.

PHOTOCELL VERSIONS ONLY –NOTE: The Photocell will be pre-wired to a 4

way connector block, therefore one terminal will contain two neutral wires. This

MUST NOT be changed.

•Check that you have correctly identified the supply wires, the connections are tight

and that no loose strands have been left out of the connection block.

•Unscrew the head carefully & install an ES/E27 (screw type) bulb into the bulb holder.

•Carefully place the rubber seal between the body and head to ensure a waterproof

seal and screw on head securely.

NOTES:

•To ease with head / body assembly, a small amount of oil such as ‘3 in 1’ can be

applied to the neck thread.

•If the head is accidentally cross-threaded when securing to the body, turn anti-

clockwise and try again –it should then screw on easily.

•Product base is fixed to the main part of the light. 4 x Anchor bolts can be used to

fix the product to the relevant surface (not supplied).

•The rubber seal supplied must be installed between the head and the body and

MUST NOT be twisted to ensure a waterproof connection.

•Photocell versions - photocell is factory pre-set and cannot be changed

WIRING DIAGRAMS:

Light

Fitting

Live Cables

Earth

Cable

Mains

Power

Cable

Neutral Cables

Earth Cable

CABLES

Neutral (N) –Blue

Live In (L) –Brown

Earth –Yellow / Green

Live Out (X) –Red (Photocell only)

*Colours of wire sleeving may vary slightly

Standard Fitting

Photocell Fitting

Full product range & more information: www.exteriorlights.co.uk

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Exterior Lights Éclairage extérieur

Exterior Lights

Exterior Lights LSTEL80 Manuel utilisateur

Manuels Éclairage extérieur populaires d'autres marques

Sealey

Sealey LED37 Manuel utilisateur

nordlux

nordlux VEJERS Guide de l'utilisateur

SImx

SImx ELITE LED LHTC637 Manuel utilisateur

GEV

GEV CAROLINE 10833 Manuel utilisateur

NEBO

NEBO NEB-LSP-0020 Manuel utilisateur

WE-EF

WE-EF PFL540 LED Manuel utilisateur

Lindby

Lindby 9949029 Manuel utilisateur

HEPER

HEPER DOGO Side LW6048.585-US Instructions d'installation et d'utilisation

HEPER

HEPER LW8034.003-US Instructions d'installation et d'utilisation

Maretti

Maretti VIBE S 14.6080.04.A Manuel utilisateur

BEGA

BEGA 84 253 Manuel

HEPER

HEPER MINIMO Instructions d'installation et d'utilisation

LIGMAN

LIGMAN BAMBOO 3 Manuel utilisateur

Maretti

Maretti TUBE CUBE WALL 14.4998.04 Manuel utilisateur

Maxim Lighting

Maxim Lighting Carriage House VX 40428WGOB Manuel utilisateur

urban ambiance

urban ambiance UQL1273 Manuel utilisateur

TotalPond

TotalPond 52238 Manuel utilisateur

Donner & Blitzen

Donner & Blitzen 0-02661479-2 Manuel utilisateur