Extech Instruments 461700 Manuel utilisateur

User's Guide

Mini Photo Tachometer Model 461700

Mini Contact Tachometer Model 461750

Extech 461700 PocketTach Mini Photo Tachometer

Extech 461700-NIST PocketTach Mini Photo Tachometer

actoolsupply.com

461700 / 461750 Version 2.3 Mar 2004

Introduction

Congratulations on your purchase of the Extech Tachometer.

The Model 461700 Photo Tachometer uses precision optics and reflective tape to

measure the RPM of rotating devices such as fans and gears.

The Model 461750 Contact Tachometer uses convex and concave attachments to

measure RPM. It also has a built-in wheel to measure the linear surface speed of moving

devices such as conveyors and treadmills. Careful use of this tachometer will provide

years of reliable service.

Specifications

General Specifications

Display 5-digit LCD Display

Range selection Automatic range selection

Time Base 4MHz Quartz Crystal

Sampling Time 1 second (>60 rpm); >1 second (10 to 60 rpm)

Photo Tachometer Distance 2 to 12” (5 to 30cm)

Operating Temperature 32 to 122oF (0 to 50oC)

Operating Humidity 80% RH Max.

Power supply 9V Battery

Battery Life 40 hours (approx.)

Applicable standards EN 50081-1/1992 (EN 55022)

EN 50082-1/1997 (EN 55024)

Dimensions 461700: 4.9 x 2.0 x 1.3” (124 x 51 x 33mm)

461750: 5.9 x 2.0 x 1.3” (150 x 51 x 33mm)

Weight 461700: 4.0 oz. (114g); 461750: 5.0 oz. (142g)

Range Specifications

Measurement Range Accuracy

Rotation

(461700 Photo) 10.000 to 99999 rpm ± (0.1% reading + 2 digits)

Rotation

(461750 Contact) 10.000 to 9999 rpm ± (0.1% reading + 2 digits)

3.0000 to 6560.0 ft/min

1.0000 to 1999.9 m/min

Surface Speed

(461750) 1.0000 to 5000.0 yds/min

± (1.5% reading + 2digits)

actoolsupply.com

461700 / 461750 Version 2.3 Mar 2004

Meter Description

1. RPM adaptor (461750 only)

2. Wheel for linear surface measurements (461750 only)

3. Adaptor shaft (461750 only)

4. Model 461700 optics

5. Hand Guard (461750 only)

6. Power ON/OFF and HOLD button

7. Unit of measure selection button (461750 only)

8. LCD Display

9. Alternate Power ON/OFF button

Note that the battery compartmentis located

on the rear of the instrument

Display Description

1. Low Battery

2. Data Hold

3. Rotations per minute

4. Meters per minute

Feet per minute

Yards per minute

actoolsupply.com

461700 / 461750 Version 2.3 Mar 2004

461750 Safety Precautions

The 461750 incorporates a finger guard for protection. However, care should be taken

when measuring surface speed to avoid injury.

1. Hold the meter firmly when touching the wheel or attachment to a moving object

2. Keep fingers behind the finger guard while taking measurements

3. Keep your eyes and attention on the measurement activity at all times

4. Do not attempt to record measurements while holding the meter to the moving object

(use the Data Hold feature to freeze the reading on the LCD; refer to the Data Hold

section of this manual).

Meter Power

Power ON / OFF

1. Press the triangular POWER HOLD button to turn the device ON. Alternatively, press

the button at the bottom of the meter (just under the LCD) which doubles as a power

on/off button. Two buttons are provided for easy reach at any holding angle.

2. Press and hold the triangular POWER HOLD button (or the alternate button) for

approx. 5 seconds to turn the device OFF.

Auto Power OFF

1. The meter turns off AUTOMATICALLY after 20 minutes.

2. For 461750 only: To disable this feature, turn the meter off. Then press and hold the

POWER and UNITS buttons until the meter turns on. Release the POWER button first

and the ‘n’ display icon will appear. This indicates that the feature is disabled.

actoolsupply.com

461700 / 461750 Version 2.3 Mar 2004

Measurements

RPM Measurements

461700 Photo Tachometer

1. Affix a small (1/4”) square of reflective tape to the surface of the device under test.

See rotating gear example diagram below.

2. Allow the device under test to turn at its normal rate.

3. Turn the meter ON.

4. Point the Tachometer’s sensor toward the reflective tape. Keep the sensor

perpendicular to the reflective tape for the best results. The distance from meter to

object can be up to 12” (30cm).

5. Read the RPM (rotations per minute) measurement on the LCD.

461750 Contact Tachometer

1. Affix the convex (cone) or concave (funnel) attachment that best fits the application

to the meter shaft as shown below.

2. Turn the meter ON.

3. Use the UNITS button to select RPM (the display will reflect the selection).

4. Touch the attachment to the moving object and read the displayed measurement.

Rotating Gear

Front view

Reflective Tape: Point

meter sensor toward tape

Rotating

Wheel

Touch the convex or

concave attachment

to the turning object

actoolsupply.com

461700 / 461750 Version 2.3 Mar 2004

Surface Speed Measurements (461750 only)

1. Turn the meter on as described previously.

2. Touch the wheel to the moving object and read the measurement on the display. Refer

to diagram below.

3. Use the UNITS button to select the unit of measure: ft/min (feet per minute); m/min

(meters per minute); yds/min (yards per minute).

Data Hold Feature

After the meter is turned on, the POWER-HOLD button can be pressed and released to

activate Data Hold. Data Hold automatically freezes the displayed reading. While the

reading is held, the HOLD display icon switches on. Press the POWER-HOLD button again

to exit this mode.

Conveyor

belt Touch wheel to moving belt

actoolsupply.com

461700 / 461750 Version 2.3 Mar 2004

Maintenance

Battery Replacement

When the 9V battery weakens, the low battery indicator appears on the LCD. To replace

the battery, open the rear compartment and exchange the battery. Be sure to replace the

compartment cover securely prior to meter use.

Meter Cleaning

Wipe the meter housing with a damp cloth only. Do not use any abrasives or solvents.

Calibration and Repair Services

Extech offers repair and calibration services for the products we sell. Extech also provides

NIST certification for most products. Call the Customer Service Department for information

on calibration services available for this product. Extech recommends that annual

calibrations be performed to verify meter performance and accuracy.

Warranty

EXTECH INSTRUMENTS CORPORATION warrants this instrument to be free of defects in parts and

workmanship for one year from date of shipment (a six month limited warranty applies on sensors and

cables). If it should become necessary to return the instrument for service during or beyond the

warranty period, contact the Customer Service Department for authorization or visit our website (click on

‘Contact Extech’ and go to ‘Service Department’ to request an RA number). A Return Authorization (RA)

number must be issued before any product is returned to Extech. The sender is responsible for shipping

charges, freight, insurance and proper packaging to prevent damage in transit. This warranty does not

apply to defects resulting from action of the user such as misuse, improper wiring, operation outside of

specification, improper maintenance or repair, or unauthorized modification. Extech specifically

disclaims any implied warranties or merchantability or fitness for a specific purpose and will not be liable

for any direct, indirect, incidental or consequential damages. Extech's total liability is limited to repair or

replacement of the product. The warranty set forth above is inclusive and no other warranty, whether

written or oral, is expressed or implied.

actoolsupply.com

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Extech Instruments Instrument de mesure

Extech Instruments

Extech Instruments 407790 Manuel utilisateur

Extech Instruments

Extech Instruments AN250W Manuel utilisateur

Extech Instruments

Extech Instruments RH25 Manuel utilisateur

Extech Instruments

Extech Instruments 407113 Manuel utilisateur

Extech Instruments

Extech Instruments AN100 Manuel utilisateur

Extech Instruments

Extech Instruments SDL300-NIST Manuel utilisateur

Extech Instruments

Extech Instruments 461893 Manuel utilisateur

Extech Instruments

Extech Instruments 381295 Manuel utilisateur

Extech Instruments

Extech Instruments 380942 Manuel utilisateur

Extech Instruments

Extech Instruments SL130 Manuel utilisateur

Extech Instruments

Extech Instruments MA440 Manuel utilisateur

Extech Instruments

Extech Instruments 407735 Manuel utilisateur

Extech Instruments

Extech Instruments LT250W Manuel utilisateur

Extech Instruments

Extech Instruments 380803 Manuel utilisateur

Extech Instruments

Extech Instruments MO57 Manuel utilisateur

Extech Instruments

Extech Instruments PQ34-12 Manuel utilisateur

Extech Instruments

Extech Instruments 407123 Manuel utilisateur

Extech Instruments

Extech Instruments GRT350 Manuel utilisateur

Extech Instruments

Extech Instruments HD350 Manuel utilisateur

Extech Instruments

Extech Instruments MZ13604 Manuel utilisateur

Extech Instruments

Extech Instruments LT45 Manuel utilisateur

Extech Instruments

Extech Instruments 407114 Manuel utilisateur

Extech Instruments

Extech Instruments Oyster-16 Manuel utilisateur

Extech Instruments

Extech Instruments AN10 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur