EVSE 3725-104 Manuel utilisateur

Control Module Inc., EVSE LLC

State of the Art EVSE with Cable Management

EVSE Payment Module

Model 3725-104

Contents

Important Notes .............................................................................................................................................................................2

Safety and Compliance ...............................................................................................................................................................2

Limitation of Liability ..................................................................................................................................................................3

User Manual and Installation Guide

Models 3725-104

EVSE Payment Module

Patents Pending

3725-UG-002

February 2018

3725-104 User Manual May 20, 2019

Page 1

FCC Compliance Statement ........................................................................................................................................................3

Important....................................................................................................................................................................................3

No Accuracy Guarantee..............................................................................................................................................................3

Copyright and Trademarks .........................................................................................................................................................3

Instructions Pertaining To Risk Of Fire Or Electrical Shock.............................................................................................................3

Important Safety Instructions.........................................................................................................................................................4

Instructions De Sécurité Importantes.............................................................................................................................................5

Introduction....................................................................................................................................................................................6

Specifications..............................................................................................................................................................................8

LOCKOUT/TAGOUT.................................................................................................................................................................. 10

Installation Overview................................................................................................................................................................... 11

Payment Module Operation ........................................................................................................................................................ 12

Keypad Overlay........................................................................................................................................................................ 12

Changing the IP Address For Ethernet Connections................................................................................................................ 12

Charging Display Screens......................................................................................................................................................... 14

Accessing the Web Browser Interface......................................................................................................................................... 17

Ethernet Connection ....................................................................................................................................................................17

Cellular Connection ...................................................................................................................................................................... 17

Logging In......................................................................................................................................................................................17

Changing the IP Address for an Ethernet Connection ..................................................................................................................18

Setting Up a ZigBee Mesh Network............................................................................................................................................. 19

Adding an EVSE Via the Web Browser Interface .......................................................................................................................... 20

Testing the ZigBee Mesh Network .......................................................................................................................................... 21

Testing the ZigBee Mesh Network Via the Web Interface ...................................................................................................... 21

Replacing a ZigBee Mesh Payment Module ............................................................................................................................ 22

Via the Payment Module .............................................................................................................................................................. 22

Via the Web Browser Interface ....................................................................................................................................................22

Web Browser Interface Operation .............................................................................................................................................. 24

Changing EVSE Assigned Numbers (Serial Connection)........................................................................................................... 24

Viewing EVSE Status and Messages......................................................................................................................................... 24

Viewing Payment Module Information ................................................................................................................................... 25

Resetting a Payment Module .................................................................................................................................................. 25

Status Reporting ...................................................................................................................................................................... 26

Current Status...............................................................................................................................................................................26

Historical Events ...........................................................................................................................................................................26

Charge History .............................................................................................................................................................................. 26

3725-104 User Manual May 20, 2019

Page 2

App Versions.................................................................................................................................................................................27

Kiosk Purchase History .................................................................................................................................................................27

Connecting to a Network Management System ..................................................................................................................... 28

White List................................................................................................................................................................................. 29

Adding RFID Cards with Printed Numbers....................................................................................................................................29

Adding RFID Cards with No Printed Numbers ..............................................................................................................................29

Configuring the White List ............................................................................................................................................................30

Vehicle List............................................................................................................................................................................... 31

System Configuration .............................................................................................................................................................. 31

Network Time Protocol (NTP) Settings .........................................................................................................................................32

Network Settings ..........................................................................................................................................................................32

Importing/Exporting Configuration Settings ................................................................................................................................33

Kiosk Configuration.................................................................................................................................................................. 35

Payment Considerations...............................................................................................................................................................36

Charge Type ..................................................................................................................................................................................36

Pricing Options ............................................................................................................................................................................. 37

Pricing Schedule............................................................................................................................................................................37

Languages .....................................................................................................................................................................................37

Common Prompts.........................................................................................................................................................................38

All Prompts ................................................................................................................................................................................... 38

Setting Up Credit Cards ........................................................................................................................................................... 39

Credit Card Setup..........................................................................................................................................................................39

External Credit Card Setup ........................................................................................................................................................... 40

MDB Setup....................................................................................................................................................................................40

Moving, Transporting And Storage:............................................................................................................................................. 41

Customer Support........................................................................................................................................................................ 41

Warranty...................................................................................................................................................................................... 42

Important Notes

Safety and Compliance

This document provides instructions to install and use the Payment Module 3725-104 which manages payment, access and

data communication within a network of Watt Point Charging Stations (EVSEs). Before installation of the Payment Module by

3725-104 User Manual May 20, 2019

Page 3

licensed professionals, you should review this manual carefully and consult with a licensed contractor, licensed electrician

and trained installation expert to ensure compliance with local building practices, climate conditions, safety standards, and

state and local codes. As part of a total EVSE network, the Payment Module and Charging Station should be inspected by a

qualified installer prior to the initial use. Under no circumstances will compliance with the information in this manual relieve

the user of responsibility to comply with all applicable codes or safety standards. This document describes the most

commonly-used installation and mounting scenarios. If situations arise in which it is not possible to perform an installation

following the procedures provided in this document, contact Control Module Inc, EVSE LLC. Control Module Inc, EVSE LLC, is

not responsible for any damages that may occur resulting from custom installations that are not described in this document.

Limitation of Liability

In no event shall Control Module Inc, EVSE LLC, or its authorized distributors be liable for any indirect, incidental, special,

punitive, or consequential damages, including without limitation, lost profits, lost data, loss of use, cost of cover, or loss or

damage to the watt point charging station or Payment Module, arising out of or relating to the use or inability to use this

manual, even if Control Module Inc, EVSE LLC, or its authorized distributors have been advised of the possibility of such

damages.

FCC Compliance Statement

Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment

is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference to radio communications. Operation

of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct

the interference at his own expense.

Important

Changes or modifications to this product not authorized by Control Module Inc, EVSE LLC, could affect the EMC compliance

and revoke your authority to operate this product.

No Accuracy Guarantee

Reasonable effort was made to ensure that the specifications and other information contained in this manual are accurate

and complete at the time of publication. The specifications and other information in this manual, however, are subject to

change at any time and without prior notice.

United States and other countries. It may not be modified, reproduced or distributed without the prior, express written

consent of Control Module Inc., EVSE LLC.

All other products or services mentioned have the trademarks, service marks, registered trademarks or registered service

marks of their respective owners. Control Module Inc., EVSE LLC, has filed several patent applications.

Instructions Pertaining To Risk Of Fire Or Electrical Shock

The following is a summary of safety concerns relevant to the installation and use of the Model 3725-104 Payment Module.

Failure to follow these safety instructions may lead to serious injury, death and/or damage to the equipment.

3725-104 User Manual May 20, 2019

Page 4

WARNING: is used to provide a warning of hazardous voltage and possibility of electric shock.

CAUTION: is used to provide awareness of important safety information in these instructions.

Important Safety Instructions

WARNING: Only qualified personnel should perform the installation. This installation must be performed in

accordance with all local electrical/building codes and ordinances. Follow lockout/tagout

procedures.

Improper connection of the equipment grounding conductor may result in a risk of electric shock.

Reference National Electrical Code, ANSI/NFPA 70 for proper sizing of the ground conductor.

CAUTION: To satisfy FCC RF exposure requirements for mobile transmitting devices, a separation

distance of 20 cm or more should be maintained between the antenna(s) of this device

and persons during device operation. To ensure compliance, operations at closer than

this distance is not recommended. The antenna(s) used for this transmitter must not be

co-located in conjunction with any other antenna or transmitter.

Additional considerations which will contribute to safe operation of this unit include the following:

DO: - Read all instructions before using this product.

- The device should be supervised when used around children.

- In case of a problem, contact your installer or CMI Customer Support.

DON’T: - Use this product if the enclosure is broken, cracked, open or shows any other indication of

damage.

- Attempt to repair or service the unit yourself.

SAVE THESE INSTRUCTIONS

3725-104 User Manual May 20, 2019

Page 5

Instructions De Sécurité Importantes

AVERTISSEMENT: est utilisé pour fournir un avertissement de tension dangereuse et possibilité de choc

électrique.

ATTENTION: est utilisé pour fournir la prise de conscience de l'information de sécurité importante dans ces

instructions.

INSTRUCTIONS DE SÉCURITÉ IMPORTANTES

AVERTISSEMENT: Seul le personnel qualifié devrait effectuer l'installation. Cette installation doit être effectuée

en conformité avec tous les codes électriques/bâtiment locaux et ordonnances. Suivre les

procédures de verrouillage/verrouillage.

Mauvaise connexion de l'équipement de mise à la terre chef d'orchestre peut entraîner un risque

de choc électrique. Référence National Electrical Code, ANSI/NFPA 70 pour le bon

dimensionnement du conducteur au sol.

Ne pas utiliser ce produit si le code de puissance souple ou le câble EV sont effiloché, a rompu

l'isolation ou tout signe de dommage.

ATTENTION: Pour satisfaire les exigences d'exposition RF de la FCC pour les appareils mobiles de transmission,

une distance de séparation de 20 cm ou plus devrait être maintenue entre l'utilisation de ce dispositif et les

personnes au cours de l'opération de l'appareil. Afin d'assurer la conformité des opérations à plus proche que

cette distance n'est pas recommandée. L'utilisation utilisée pour cet émetteur ne doit pas être détachée en

conjonction avec tout autre antenne ou émetteur.

Considérations supplémentaires, ce qui contribueront à la sécurité de fonctionnement de cette unité sont les

suivants :

DO: - Lire toutes les instructions avant d'utiliser ce produit.

- L'appareil doit être supervisé lorsqu'il est utilisé autour des enfants.

- En cas de problème, contactez votre installateur ou soutien à la clientèle CMI.

NE PAS: - N'utilisez pas que ce produit si l'enceinte est cassée, fissuré, ouvrir ou afficher toute autre indication

de dommages.

- N'essayez pas de réparer ou d'un service de l'unité de vous-même.

ENREGISTREZ CES INSTRUCTIONS

3725-104 User Manual May 20, 2019

Page 6

Introduction

The Model 3725-104 Payment Module operates as the central payment, access and communication system manager for a

network of Electric Vehicle Supply Equipment (EVSE) charging systems.

When communicating between an EVSE and a Payment Module, your options are ZigBee Mesh or Serial RS-232. When

communicating between a Payment Module and your network, your options are Cellular or Ethernet, where the unit

communicates with third-party networks via the Payment Module using an Ethernet connection. The Payment Module does

not need to be physically connected to EVSEs when set up for wireless or cellular operation.

The Payment Module is packaged in a NEMA 3R-rated enclosure so it is designed to withstand the harshest elements,

including direct rain and external icing. The 3725-104 is also rust-resistant.

The Payment Module has a user-friendly 3x4 keypad, with stainless steel snap domes for tactile feel. The keypad is also sealed

to be weather-resistant. A 4x20 Position LCD is designed to be seen clearly and easily outdoors. The LCD and character size

provide greater luminescence and clarity. The 3725 also has an optional encrypted magnetic card reader, allowing payment

with credit and debit cards, and optional RFID reader. Card and card holder information is encrypted as it is transmitted to the

credit card payment processor, and is never stored locally in the Payment Module. When a valid card authorization is received,

the EVSE is activated, and the start of the transaction is stored both locally and transmitted to the central host. The charge is

held against the card until charging is complete and the cable is removed from the vehicle, at which time the host computer is

notified, payment is finalized, and fees are charged. Payment Modules can be ordered with both options or just one.

The layout of the Payment Module when connected to an EVSE is shown in Figure 1.

Figure 1

Figure 2 shows the location of the Payment Module when mounted on a dual 3704 EVSE.

3725-104 User Manual May 20, 2019

Page 7

Figure 2

3725-104 User Manual May 20, 2019

Page 8

Specifications

Product Code

Model 3725-104

Mounting: On EVSE Pole, Remote Pole or Wall

Communication to EVSE: ZigBee Mesh or Serial RS-232

Communication to Network: Ethernet or Cellular

Payment Method: Credit/Debit Card Magnetic Reader

RFID Reader (Optional)

Electrical

Voltage

Power Consumption

+24 VDC @ 1 amp

Less than 24 watts (Based on Configuration)

Hardware

CPU

Display

Keypad

Credit Card Reader

RFID Reader

Ethernet

ZigBee

Environmental

1 GHz

LCD, 4 rows, 20 alphanumeric characters per row

3x4 keypad, ½” keys on 5/8” centers, sealed, snap-dome

Encrypted

Mifare/iClass-compatible

IEEE 802.3 10Base-T and 802.3u 100Base-T

Frequency: 2.4 GHz

Operating Temp

Operating Humidity

NEMA Rating

Compliance

-22F to +122F (-30C to 50C) Ambient

0% to 90% non-condensing

EMC

Accessories

Meets FCC Class A, Canadian ICES-003

Communication to EVSE (ZigBee)

Communication to Network

(Cellular Modem)

RFID Reader

General

Contains - FCC ID: MCQ-PROS2B, IC: 1846A-PROS2B (optional)

Contains - (V) FCC ID: N7N-SL5011, IC: 2417C-SL5011 (optional)

- (A) FCC ID: N7N-SL8090, IC: 2417C-SL8090 (optional)

Contains - FCC ID: JQ6-MCLASSRP10E, IC:2236B-MCLASSRP10E (optional)

Weight

Size

2.30 lbs.

4 in (W) x 17 9/16 in (H) x 2 1/2 in (D)

*Observe all required Lockout/Tagout procedures while making any electrical connections or servicing the unit.

3725-104 User Manual May 20, 2019

Page 9

Network Payment Comm Mount

Options Options Options Options

Payment Module

Base Unit: 3725-104 x xx x xx

Cellular Communication Options (Ethernet Included)

Ethernet E

CDMA (Verizon) V

GSM (AT&T, Sim Card Customer Supplied) A

Payment Options

Insertion Mag Stripe Reader 09

Insertion Mag Stripe and iCLASS Readers 10

Insertion Mag Stripe and Blackboard VR100 Reader* 11

(*Includes 110 VAC/24 VDC pwr supply for ZigBee)

Communications Options

Serial S

ZigBee Z

Mounting Options

None (When mounted on EVSE pole as part of shipped assembly) xx

Pole (pole with Blackboard Reader Assembly, ZigBee) PB

Pole (standalone Pmt Mod with Pole w/ 24VDC power supply, for ZigBee comm) P1

Pole with 1-2 Mux (includes standalone Pmt Mod, 3x6 pole, 1-2 EVSE, serial) P2

Pole with 1-4 Mux (includes standalone Pmt Mod, 3x6 pole, 1-4 EVSE,serial) P3

Pole with 5-8 Mux (includes standalone Pmt Mod, 3x6 pole, 5-8 EVSE serial) P4

Wall (with Blacboard Reader Assembly, ZigBee) WB

Wall (Includes standard wall frame and 24 VDC power supply, ZigBee com) W1

Wall with 1-2 Mux (includes Pmt mod, wall frame, mux, 1-2 EVSE, serial) W2

Wall with 1-4 Mux (includes Pmt Mod, standard wall frame, mux, 1-4 EVSE, serial) W3

Wall with 5-8 Mux (includes Pmt Mod, standard wall frame, mux, 5-8 EVSE, serial) W4

KEY

PA = 3725-104-E-09-S-xx ….Payment Module (E,CC,S) PA (3725-A0400)

PB = 3725-104-E-10-S-xx …Payment Module (E,CC,RFID ICLASS,S) PB (3725-A0403)

PC = 3725-104-E-09-Z-xx …Payment Module (E,CC,ZigBee) PC (3725-A0404)

PD = 3725-104-E-10-Z-xx …Payment Module (E,CC,RFID ICLASS,ZigBee) PD (3725-A0405)

PE = 3725-104-V-09-S-xx .. Payment Module (CDMA Modem(V),CC,S) PE (3725-A0402)

PF = 3725-104-V-10-S-xx …Payment Module (CDMA Modem (V),CC,RFID ICLASS,S) PF (3725-A0401)

PG = 3725-104-V-09-Z-xx ..Payment Module (CDMA Modem (V),CC,ZigBee) PG (3725-A0406)

PH = 3725-104-V-10-Z-xx .. Payment Module (CDMA Modem (V),CC,RFID ICLASS,ZigBee) PH (3725-A0407)

PI = 3725-104-A-09-S-xx ..Payment Module (GSM Modem (A),CC,S) PI (3725-A0408)

PJ = 3725-104-A-10-S-xx ..Payment Module (GSM Modem (A),CC,RFID ICLASS,S) PJ (3725-A0409)

PK = 3725-104-A-09-Z-xx …Payment Module (GSM Modem (A),CC,ZigBee) PK (3725-A0410)

PL = 3725-104-A-10-Z-xx …Payment Module (GSM Modem (A),CC,RFID ICLASS, ZigBee) PL (3725-A0411)

Table des matières

Autres manuels EVSE Unité de contrôle

EVSE

EVSE 3727 Series Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur