EVOC MEC-4032 Manuel utilisateur
特种计算机
Industrial Computer
产品说明书
User Manual
MEC-4032
微型低功耗无风扇嵌入式整机
Low Power Fanless Micro Embedded PC
Version: C02
Legal Information
Warnings
Please pay attention to the tips within the manual so as to avoid personal injury or
property losses. The tips for personal injury are indicated in warning triangles while
the tips only related to property losses have no warning triangles. The warning tips are
listed as follows with the hazardous scale from severe to slight.
Danger
If handled carelessly, death or severe human injury will occur.
Warning
If handled carelessly, death or severe human injury might occur.
Caution
Warning triangle indicates that slight human injury might occur if handled carelessly.
Note
Unexpected result or status might occur, if not handled according to the tips.
Professional Personnel
The product/system covered by the manual can only be handled by qualified and
professional personnel. During operation, please follow the respective instructive
manuals, especially the safety warnings. The professional personnel have been trained
and possess relevant experiences; therefore, he/she could be aware of the risks of the
product/system and avoid possible damages.
EVOC Product
Please pay attention to the following instructions:
Warning
EVOC product can only be used according to the descriptions within the manual,
including the contents and the relevant technical documents. If the products or
components from other companies are required, please get the recommendation and
grant from EVOC first. Proper transportation, storage, assembly, installation,
debugging, operation and maintenance are prerequisite to ensure product safety and
normal operation; therefore, please ensure permitted environment conditions and pay
attention to the tips within the manual.
Copyright Notice
Information offered in this manual is believed to be correct at the time of printing, and
is subject to change without prior notice in order to improve reliability, design and
function and does not represent a commitment on the part of the manufacturer. In no
event will the manufacturer be liable for direct, indirect, special, incidental, or
consequential damages arising out of improper installation and/or use, or inability to
use the product or documentation.
This user manual is protected by copyright. No part of this manual may be reproduced,
stored in any retrieval system, or transmitted, in any form or by any means,
mechanical, electronic, photocopied, recorded or otherwise, without the prior written
permission from the manufacturer.
Trademarks
EVOC is a registered trademark of EVOC Intelligent Technology Co., Ltd. Other
product names mentioned herein are used for identification purposes only and may be
trademark and/or registered trademarks of their respective companies.
Warranty Terms:
The warranty on the product lasts for one year. If the user has additional requirements,
the contract signed between the two sides shall prevail.
Please visit our website: http://www.evoc.com for more information,
Hotline: 4008809666
About this manual
Scope of the Manual
The manual is appropriate for EVOC MEC-4032.
Convention
The term “the PC” or “the Product” within the manual usually stands for EVOC
MEC-4032.
Instructions
Safety instructions
To avoid property losses or individual injury, please pay attention to the safety
instructions within the manual. The warnings within the manual are marked with
warning triangle , whose existence is dependent upon the scale of the
potential hazard.
Contents
1. Product Introduction .................................................................................................1
1.1 Overview.........................................................................................................1
1.2 Specifications..................................................................................................1
2. Application Scheme ..................................................................................................4
2.1 Transportation .................................................................................................4
2.2 Storage ............................................................................................................4
2.3 Opening the Box and Initial Examination.......................................................5
2.4 MountingMode ..............................................................................................5
3. Device Connection....................................................................................................6
3.1 Notices before Connection..............................................................................6
3.2 Product Grounding..........................................................................................6
3.3 Connecting the Device to Power.....................................................................7
4. Instructions ...............................................................................................................8
4.1 Outer Appearance ...........................................................................................8
4.2 Product Drawing and Installation Dimensions................................................8
4.3 External Structure ...........................................................................................9
4.4 Operation Control .........................................................................................10
4.5 Indicator........................................................................................................10
4.6 Jumper Setting ..............................................................................................10
5. Assembly and Maintenance ....................................................................................14
5.1 Overall Assembly Drawing...........................................................................14
5.2 Opening the Cover ........................................................................................15
5.3 Installation and Removal of Motherboard.....................................................15
5.3.1 Installing the Motherboard.................................................................15
5.3.2 Removing the Motherboard ...............................................................16
5.4 Installation and Removal of Hard Drive .......................................................16
5.5 Installation and Removal of Power Supply...................................................17
5.5.1 Installing the Power ...........................................................................17
5.5.2 Removing the Power..........................................................................17
5.6 Installing the Mounting Bracket....................................................................18
6. Installing the Drivers ..............................................................................................19
7. Appendix.................................................................................................................20
7.1 Troubleshooting and Solutions......................................................................20
Product Introduction
MEC-4032 - 1 -
1. Product Introduction
1.1 Overview
MEC-4032 is a low power fanless micro embedded PC. The product
contains Intel® Atom™ D2550 + NM10 chipset, and supports Windows XP,
Windows 7, Linux operating systems. In addition, a pluggable installation
method makes adding or removing HDD quicker and more convenient.
Shaped by galvanized plate, the PC features simple structure, highly
reliable system and strong environmental adaptability, and provides excellent
dust-proof, heat dissipation, anti-vibration and EMC performance.
The PC can be used in a wide range of fields, such as digital health
information system, electronic medical record system, anesthesia information
management system, bus stop board and airport flight information display
control.
1.2 Specifications
Items Definition
Micro processor Onboard Intel® Atom™ D2550 (dual-core) processor
Chipset Intel® ATOM™ D2550 + NM10
Memory
1 x 204Pin DDR3 SO-DIMM memory slot. Supported
memory types: Un-buffered, NO-ECC. Maximum
memory capacity supported: 4GB
Display Supports VGA, DVI and HDMI displays
Main Functional Index
Network Provides two 10/100/1000Mbps LAN ports. LAN1
supports Wake-On-LAN and network boot
Product Introduction
- 2 - MEC-4032
External IO
ports
1 x VGA port
1 x DVI port
1 x HDMI port
1 x standard keyboard/mouse port
One set of LINE_OUT and MIC_IN audio
connectors
2 x RJ45 LAN port
6 x standard USB2.0 port
6 x COM port; COM2, COM3, COM4, COM5,
COM6 supports RS-232/RS-422/RS-485 modes
Dimensions
(Excluding
mounting ear)
230mm(W) x 85.4mm(H) x 190mm(D)
Net weight Appr. 3.45Kg
Temperature
Operating temperature:
Band hard disk work temperature :-5℃~45℃;
Band the Cfast card or SSD work
temperature:-20℃~60℃;
(Note: CFast card has a function of anti-high
temperature, which can prevent data loss when the
card is used in a high temperature environment.)
Storage temperature: -30℃～70℃
Humidity 5%～95% (Non-condensing)
EMC
Limits of radio disturbance are compliant with
GB9254-2008, class A;
Limits of immunity are compliant with the
threshold of GB/T 17626.x
Main Functional Index
Reliability MTBF≥100000h
MTTR≤0.5h
Product Introduction
MEC-4032 - 3 -
Safety Meets basic requirements of GB4943
Mechanical and
environmental
adaptability
Anti-vibration: 5-17Hz/1.0mm amplitude;
17-200Hz/1.0g acceleration;
Anti-shock: 10g acceleration, 11ms duration
Power
12-24VDC Input /Maximum5A;
Power consumption of the PC: 13W (standby);
Power consumption of the PC: 20W (operating 3D
100%)
Note: The maximum support of the input voltage
9-32VDC, over this range, the machine will not boot.
Application Scheme
- 4 - MEC-4032
2. Application Scheme
2.1 Transportation
Well-packaged products are suited for transportation by all kinds of vehicles. During
transportation, products should not be put in open cabin or carriage. During
transshipping, products should not be stored in open air without protection from the
atmospheric conditions. Products should not be transported together with inflammable,
explosive and corrosive substances and are not allowed to be exposed to rain, snow
and liquid substances and mechanical force.
2.2 Storage
Products should be stored in package box when it is not used. And warehouse
temperature should be 0°C ~ 40°C, and relative humidity should be 20% ~ 85%. In
the warehouse, there should be no harmful gas, inflammable, explosive products, and
corrosive chemical products, and strong mechanical vibration, shock and strong
magnetic field interference. The package box should be at least 10cm above ground,
and 50cm away from wall, thermal source, window and air inlet.
Caution!
Risk of destroying the device!
When shipping the PC in cold weather, please pay attention to the extreme
temperature variation. Under this circumstance, please make sure no water
drop (condensation) is formed on the surface or interior of the device. If
condensation is formed on the device, please wait for over twelve hours before
connecting the device.
Table des matières
Autres manuels EVOC PC industriel
EVOC
EVOC P19 Series Manuel utilisateur
EVOC
EVOC ERC-1004A Manuel utilisateur
EVOC
EVOC MEC-5031-M Series Manuel utilisateur
EVOC
EVOC PPC-1561 Manuel utilisateur
EVOC
EVOC PPC-1006 Manuel utilisateur
EVOC
EVOC LNB-1406 Manuel utilisateur
EVOC
EVOC IPC-820 Manuel utilisateur
EVOC
EVOC ERC-1004A Manuel utilisateur
EVOC
EVOC EIS-2205 Manuel utilisateur
EVOC
EVOC P12 Series Manuel utilisateur
Manuels PC industriel populaires d'autres marques
Dell
Dell Embedded Box PC 5000 Manuel utilisateur
IBASE Technology
IBASE Technology ASB200-918 Series Manuel utilisateur
Lenovo
Lenovo ThinkCentre M90q Manuel du propriétaire
IXXAT
IXXAT Econ 100 Manuel utilisateur
Kontron
Kontron KBox A-151-TGL Manuel utilisateur
AXIOMTEK
AXIOMTEK ICO500-518 Series Manuel utilisateur