0453172b-2413-4271-9898-33b9292ff0b1 / DP1.0 8 / 12 Eurolyser Diagnostica GmbH
7. Sampletype menu
(not for all tests)
8. Hematocrit menu
(not for all tests and/or sampletypes)
Touch Serum or Blood and
confirm the selection with .
Enter the hematocrit value and
confirm it with .
Insert the test cartridge.
Touch : The door closes and
the smart laboratory photometer
runs the test automatically.
Be sure to handle the test cartridge according the instructions on the
package insert as well as make sure the test cartridge is firmly capped
before you insert it into the smart laboratory photometer.
Be sure the test cartridge is completely put into the proper opening in the
smart laboratory photometer.
Use only test cartridges that are approved by the manufacturer. Otherwise
severe damage to the smart laboratory photometer and/or incorrect results
can occur.
Do not attempt to open or close the door manually.
Viewing and processing the test results
The Eurolyser laboratory photometer can store up to 250 patient and control results in its memory. Once
capacity is exceeded, oldest results are deleted.
The following parameters are saved from each test:
The result is shown. Touch to
print it out. Touch to
export it to an HIS/LIS or PC, or
touch to display the
photometric data. Touch to
close the menu and end the test.
The smart laboratory photometer
automatically opens the door.
Remove the test cartridge and
discard it. Touch to close the
door. The main menu now
appears. Touch to go to the
overall result menu.
Use and to scroll back
and forth within the results. Touch
to print the result(s). Touch
to transmit the result(s) to
a PC. Touch to delete the
result(s). Touch to return to
the main menu.
