Espressif Systems EK057 Manuel utilisateur

EK057

User Manual

Prerelease version 0.2

Espressif Systems

www.espressif.com

About This Document

This user manual shows how to get started with EK057 module.

Document Updates

Please always refer to the latest version on https://www.espressif.com/en/support/download/documents.

Revision History

For revision history of this document, please refer to the last page.

Documentation Change Notification

Espressif provides email notifications to keep customers updated on changes to technical documentation. Please

subscribe at www.espressif.com/en/subscribe. Note that you need to update your subscription to receive notifi-

cations of new products you are not currently subscribed to.

Certification

Download certificates for Espressif products from www.espressif.com/en/certificates.

Disclaimer and Copyright Notice

Information in this document, including URL references, is subject to change without notice. THIS DOCUMENT IS

PROVIDED AS IS WITH NO WARRANTIES WHATSOEVER, INCLUDING ANY WARRANTY OF MERCHANTABIL-

ITY, NON-INFRINGEMENT, FITNESS FOR ANY PARTICULAR PURPOSE, OR ANY WARRANTY OTHERWISE

ARISING OUT OF ANY PROPOSAL, SPECIFICATION OR SAMPLE.

All liability, including liability for infringement of any proprietary rights, relating to use of information in this docu-

ment is disclaimed. No licenses express or implied, by estoppel or otherwise, to any intellectual property rights

are granted herein. The Wi-Fi Alliance Member logo is a trademark of the Wi-Fi Alliance. The Bluetooth logo is a

registered trademark of Bluetooth SIG.

All trade names, trademarks and registered trademarks mentioned in this document are property of their respective

owners, and are hereby acknowledged.

Contents

1 Overview 1

1.1 Module Overview 1

1.2 Pin Description 1

2 Get Started on EK057 3

2.1 What You Need 3

2.2 Hardware Connection 3

2.3 Set up Development Environment 4

2.3.1 Install Prerequisites 4

2.3.2 Get ESP-IDF 4

2.3.3 Set up Tools 5

2.3.4 Set up Environment Variables 5

2.4 Create Your First Project 5

2.4.1 Start a Project 5

2.4.2 Connect Your Device 5

2.4.3 Configure 6

2.4.4 Build the Project 6

2.4.5 Flash onto the Device 7

2.4.6 Monitor 8

3 Learning Resources 10

3.1 Must-Read Documents 10

3.2 Must-Have Resources 10

Revision History 12

1. Overview

1.1 Module Overview

EK057 is a powerful, generic Wi-Fi+Bluetooth®+Bluetooth®LE MCU module that targets a wide variety of appli-

cations, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music

streaming and MP3 decoding.

Table 1: EK057 Specifications

Categories Items Specifications

Wi-Fi Protocols 802.11 b/g/n (802.11n up to 150 Mbps)

A-MPDU and A-MSDU aggregation and 0.4 µs guard

interval support

Frequency range 2412 ~2484 MHz

Bluetooth®

Protocols Protocols v4.2 BR/EDR and Bluetooth®LE specifica-

tions

Radio Class-1, class-2 and class-3 transmitter

AFH

Audio CVSD and SBC

Hardware

Module interfaces UART, SPI, I2C, I2S, GPIO, ADC

Integrated crystal 40 MHz crystal

Integrated SPI flash 8 MB

Operating voltage/Power supply 3.0 V ~3.6 V

Operating current Average: 80 mA

Minimum current delivered by power

supply 500 mA

Recommended operating tempera-

ture range –40 °C ~+85 °C

Moisture sensitivity level (MSL) Level 3

1.2 Pin Description

The module has 14 pins and 7 testing points. See pin definitions in Table 2.

Table 2: Pin Definitions

Name No. Type Function

IO32 A1 I/O GPIO32, XTAL_32K_P (32.768 kHz crystal oscillator input), ADC1_CH4,

TOUCH9, RTC_GPIO9

IO16 A2 I/O GPIO16, HS1_DATA4, U2RXD, EMAC_CLK_OUT

IO17 A3 I/O GPIO17, HS1_DATA5, U2TXD, EMAC_CLK_OUT_180

IO5 A4 I/O GPIO5, VSPICS0, HS1_DATA6, EMAC_RX_CLK

3V3 A5 P Power supply

GND A6 P Ground

Espressif Systems 1 EK057 User Manual V0.2

1. Overview

Name No. Type Function

GND A7 P Ground

GND A8 P Ground

GND A9 P Ground

IO18 A10 I/O GPIO18, VSPICLK, HS1_DATA7

IO23 A11 I/O GPIO23, VSPID, HS1_STROBE

IO19 A12 I/O GPIO19, VSPIQ, U0CTS, EMAC_TXD0

IO33 A13 I/O GPIO33, XTAL_32K_N (32.768 kHz crystal oscillator output),

ADC1_CH5, TOUCH8, RTC_GPIO8

EN A14 I

High: On; enables the chip

Low: Off; the chip powers off

Note: Do not leave the pin floating.

IO14 TP22 I/O GPIO14, ADC2_CH6, TOUCH6, RTC_GPIO16, MTMS, HSPICLK,

HS2_CLK, SD_CLK, EMAC_TXD2

IO15 TP21 I/O GPIO15, ADC2_CH3, TOUCH3, MTDO, HSPICS0, RTC_GPIO13,

HS2_CMD, SD_CMD, EMAC_RXD3

IO13 TP18 I/O GPIO13, ADC2_CH4, TOUCH4, RTC_GPIO14, MTCK, HSPID,

HS2_DATA3, SD_DATA3, EMAC_RX_ER

IO12 TP17 I/O GPIO12, ADC2_CH5, TOUCH5, RTC_GPIO15, MTDI, HSPIQ,

HS2_DATA2, SD_DATA2, EMAC_TXD3

IO0 TP19 I/O GPIO0, ADC2_CH1, TOUCH1, RTC_GPIO11, CLK_OUT1,

EMAC_TX_CLK

RXD TP16 I/O GPIO3, U0RXD, CLK_OUT2

TXD TP20 I/O GPIO1, U0TXD, CLK_OUT3, EMAC_RXD2

Espressif Systems 2 EK057 User Manual V0.2

2. Get Started on EK057

2.1 What You Need

To develop applications for EK057 module you need:

• 1 x EK057 module

• 1 x Espressif RF testing board

• 1 x USB-to-Serial board

• 1 x Micro-USB cable

• 1 x PC running Linux

In this user guide, we take Linux operating system as an example. For more information about the configuration

on Windows and macOS, please refer to ESP-IDF Programming Guide.

2.2 Hardware Connection

1. Solder the EK057 module to the RF testing board as shown in Figure 1.

Figure 1: Hardware Connection

2. Connect the RF testing board to the USB-to-Serial board via TXD, RXD, and GND.

3. Connect the USB-to-Serial board to the PC.

4. Connect the RF testing board to the PC or a power adapter to enable 5 V power supply, via the Micro-USB

cable.

5. During download, connect IO0 to GND via a jumper. Then, turn ”ON” the testing board.

Espressif Systems 3 EK057 User Manual V0.2

2. Get Started on EK057

6. Download firmware into flash. For details, see the sections below.

7. After download, remove the jumper on IO0 and GND.

8. Power up the RF testing board again. EK057 will switch to working mode. The chip will read programs from

flash upon initialization.

Note:

IO0 is internally logic high. If IO0 is set to pull-up, the Boot mode is selected. If this pin is pull-down or left floating, the

Download mode is selected. For more information on EK057, please refer to EK057 Datasheet.

2.3 Set up Development Environment

The Espressif IoT Development Framework (ESP-IDF for short) is a framework for developing applications based on

the Espressif ESP32. Users can develop applications with ESP32 in Windows/Linux/macOS based on ESP-IDF.

Here we take Linux operating system as an example.

2.3.1 Install Prerequisites

To compile with ESP-IDF you need to get the following packages:

• CentOS 7:

sudo yum install git wget ex bison gperf python cmake ninja−build ccache dfu−util

• Ubuntu and Debian (one command breaks into two lines):

sudo apt−get install git wget ex bison gperf python python−pip python−setuptools cmake

ninja−build ccache lib −dev libssl −dev dfu−util

• Arch:

sudo pacman −S−−needed gcc git make ex bison gperf python−pip cmake ninja ccache dfu−util

Note:

• This guide uses the directory ~/esp on Linux as an installation folder for ESP-IDF.

• Keep in mind that ESP-IDF does not support spaces in paths.

2.3.2 Get ESP-IDF

To build applications for EK057 module, you need the software libraries provided by Espressif in ESP-IDF repository.

To get ESP-IDF, create an installation directory (~/esp) to download ESP-IDF to and clone the repository with ‘git

clone’:

mkdir −p ~/esp

cd ~/esp

git clone −−recursive https://github.com/espressif/esp−idf. git

Espressif Systems 4 EK057 User Manual V0.2

2. Get Started on EK057

ESP-IDF will be downloaded into ~/esp/esp-idf. Consult ESP-IDF Versions for information about which ESP-IDF

version to use in a given situation.

2.3.3 Set up Tools

Aside from the ESP-IDF, you also need to install the tools used by ESP-IDF, such as the compiler, debugger, Python

packages, etc. ESP-IDF provides a script named ’install.sh’ to help set up the tools in one go.

cd ~/esp/esp−idf

./ install .sh

2.3.4 Set up Environment Variables

The installed tools are not yet added to the PATH environment variable. To make the tools usable from the command

line, some environment variables must be set. ESP-IDF provides another script ’export.sh’ which does that. In the

terminal where you are going to use ESP-IDF, run:

. $HOME/esp/esp−idf/export.sh

Now everything is ready, you can build your first project on EK057 module.

2.4 Create Your First Project

2.4.1 Start a Project

Now you are ready to prepare your application for EK057 module. You can start with get-started/hello_world

project from examples directory in ESP-IDF.

Copy get-started/hello_world to ~/esp directory:

cd ~/esp

cp −r $IDF_PATH/examples/get−started/hello_world .

There is a range of example projects in the examples directory in ESP-IDF. You can copy any project in the same

way as presented above and run it. It is also possible to build examples in-place, without copying them first.

2.4.2 Connect Your Device

Now connect your EK057 module to the computer and check under what serial port the module is visible. Se-

rial ports in Linux start with ‘/dev/tty’ in their names. Run the command below two times, first with the board

unplugged, then with plugged in. The port which appears the second time is the one you need:

ls /dev/tty*

Note:

Keep the port name handy as you will need it in the next steps.

Espressif Systems 5 EK057 User Manual V0.2

2. Get Started on EK057

2.4.3 Configure

Navigate to your ‘hello_world’ directory from Step 2.4.1. Start a Project, set ESP32 chip as the target and run the

project configuration utility ‘menuconfig’.

cd ~/esp/hello_world

idf .py set−target esp32

idf .py menucong

Setting the target with ‘idf.py set-target esp32’ should be done once, after opening a new project. If the project

contains some existing builds and configuration, they will be cleared and initialized. The target may be saved in

environment variable to skip this step at all. See Selecting the Target for additional information.

If the previous steps have been done correctly, the following menu appears:

Figure 2: Project Configuration - Home Window

The colors of the menu could be different in your terminal. You can change the appearance with the option ‘-�-style’�.

Please run ‘idf.py menuconfig -�-help’�for further information.

2.4.4 Build the Project

Build the project by running:

idf .py build

This command will compile the application and all ESP-IDF components, then it will generate the bootloader,

partition table, and application binaries.

$ idf .py build

Running cmake in directory /path/to/hello_world/build

Executing ”cmake −G Ninja −−warn−uninitialized /path/to/hello_world”...

Warn about uninitialized values .

−− Found Git: /usr/bin/git (found version ”2.17.0”)

Espressif Systems 6 EK057 User Manual V0.2

2. Get Started on EK057

−− Building empty aws_iot component due to conguration

−− Component names: ...

−− Component paths: ...

... (more lines of build system output)

[527/527] Generating hello −world.bin

esptool .py v2.3.1

Project build complete. To ash , run this command:

../../../ components/esptool_py/esptool/esptool.py −p (PORT) −b 921600 write_ash −−ash_mode dio

−−ash_size detect −−ash_freq 40m 0x10000 build/hello−world.bin build 0x1000

build/bootloader/bootloader. bin 0x8000 build/ partition_table / partition −table.bin

or run ’ idf .py −p PORT ash’

If there are no errors, the build will finish by generating the firmware binary .bin file.

2.4.5 Flash onto the Device

Flash the binaries that you just built onto your EK057 module by running:

idf .py −p PORT [−b BAUD] ash

Replace PORT with your module‘s serial port name from Step: Connect Your Device.

You can also change the flasher baud rate by replacing BAUD with the baud rate you need. The default baud rate

is 460800.

For more information on idf.py arguments, see idf.py.

Note:

The option ‘flash‘ automatically builds and flashes the project, so running ‘idf.py build‘ is not necessary.

Running esptool.py in directory [...]/ esp/hello_world

Executing ”python [...]/ esp−idf/components/esptool_py/esptool/esptool.py −b 460800 write_ash

@ash_project_args ”...

esptool .py −b 460800 write_ash −−ash_mode dio −−ash_size detect −−ash_freq 40m 0x1000

bootloader/bootloader.bin 0x8000 partition_table / partition −table.bin 0x10000 hello−world.bin

esptool .py v2.3.1

Connecting ....

Detecting chip type ... ESP32

Chip is ESP32D0WDQ6 (revision 1)

Features : WiFi, BT, Dual Core

Uploading stub ...

Running stub ...

Stub running ...

Changing baud rate to 460800

Changed.

Espressif Systems 7 EK057 User Manual V0.2

Table des matières

Autres manuels Espressif Systems Unité de contrôle

Espressif Systems

Espressif Systems ESP32-WROVER-E Manuel utilisateur

Espressif Systems

Espressif Systems ESP32-S3-WROOM-2 Manuel utilisateur

Espressif Systems

Espressif Systems ESP32-WROOM-32E Manuel utilisateur

Espressif Systems

Espressif Systems ESP32-WROOM-32UE Manuel utilisateur

Espressif Systems

Espressif Systems ESP32-PICO-V3-ZERO Manuel utilisateur

Espressif Systems

Espressif Systems ESP32-S2-MINI-2 Manuel utilisateur

Espressif Systems

Espressif Systems ESP32-S2-SOLO-2 Manuel utilisateur

Espressif Systems

Espressif Systems ESP32-S3-MINI-1 Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur