3
but any GPU has stopped working normally, which will negatively affect other
processes. The option is designed to protect against this situation.
–Reset the PC in case of low average GPU load. It is intended for those
cases when the calculating software has failed and has completed its work, but the
PC is functioning properly. To avoid temporary loss, the device will reboot the PC
after a specified time, if the average load of the video cards does not rise above the
specified threshold. Time varies from 3 to 10 minutes with a discreteness of 30
seconds, average workload - from 50 to 100% in 10% increments. The average
load, as well as the remaining time before resetting, is displayed in the status bar at
the bottom.
Also this option can be supplemented by setting or unchecking the "Reset if
only low ping" checkbox. It happens that the calculations are terminated due to the
loss of the Internet –in this case, the reset is impractical. This option will be
described in more detail below.
Shutdown/power on options:
–disconnecting the PC after the set time. Varies from 1 to 10 minutes with a
discreteness of 30 seconds, set using the slider. Forcibly turns off the PC and turns
it on again after 15 seconds, if the specified time does not receive a response from
the software. If the emergency reset option of the PC is disabled, it will perform an
emergency shutdown/power on of the PC at the specified frequency until a
response is received from the software; Otherwise it will shutdown and turn on
after an emergency reset after a specified period of time and repeat the cycle until a
response is received from the software.
–shutdown PC in case of CPU and/or GPU overheating. The temperature
varies from 50 to 95 degrees Celsius with a discreteness of 5 degrees. In the status
bar below, the maximum temperature of the processors and video cards detected in
the system is displayed. If the maximum temperature exceeds the threshold, the
device will shutdown the PC. The activation will occur depending on the option
below.
–power on the PC after cooling. It varies from 5 to 60 minutes with a
discreteness of 5 minutes. If the PC was shutdown as a result of overheating, the
Device will give a command to turn on after the specified time, after natural
cooling of internal nodes. If this option is not selected, the user is responsible for
resetting the device's emergency state and power on the PC.
