Escea EK1250 Instructions de montage
Installaon Instrucons and User Guide
For the latest documentaon, visit www.escea.com
EK Series
630451_1
Escea Fireplace Kitchen
WARNING
THE APPLIANCE & FLUE SYSTEM SHALL BE INSTALLED IN ACCORDANCE WITH:
AS/NZS 2918
THIS INSTALLATION INSTRUCTION BOOKLET
LOCAL / NATIONAL BUILDING CODES
ANY OTHER RELEVANT STATUTORY REGULATIONS
LEAVE THESE INSTRUCTIONS WITH THE END USER.
Warranty Repair and Annual Servicing
Warranty repair work must be carried out by a suitably qualified person.
Any shortcomings in the appliance and flue installation will be the responsibility of the installer.
Escea will not be accountable for any such failings or their consequences.
Manufactured by: Escea Ltd, PO Box 5277 Dunedin NZ, Ph: +64 3 478 8220
For contact details of your local Escea distributor or dealer, please visit www.escea.com or email us at
WARNING
FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN DEATH, SERIOUS
BODILY INJURY, AND/OR PROPERTY DAMAGE. FAILURE TO FOLLOW THESE
INSTRUCTIONS MAY ALSO VOID YOUR FIRE INSURANCE AND/OR WARRANTY.
A LIT FIRE MUST NEVER BE LEFT UNATTENDED.
THE FIREPLACE MUST ONLY BE USED FOR COOKING/HEATING AS INTENDED.
MAINTAIN AND OPERATE THE FIREPLACE IN ACCORDANCE WITH THESE
INSTRUCTIONS.
DO NOT USE FLAMMABLE LIQUIDS OR AEROSOLS TO START OR REKINDLE A FIRE.
DO NOT PLACE ANY COMBUSTIBLES IN FRONT OF THE FIRE AS SOME FIREWOOD
MAY SPIT SPARKS.
DO NOT TOUCH THE SURFACES AS THEY CAN BE VERY HOT EVEN AFTER THE FIRE
HAS BURNT OUT.
ENSURE CORRECT INSTALLATION AS PER THESE INSTRUCTIONS.
DO NOT MODIFY THE FIRE.
DO NOT OPERATE THE FIRE WITHOUT THE FLUE SYSTEM.
YOUNG CHILDREN SHOULD BE CAREFULLY SUPERVISED WHEN THEY ARE IN THE
SAME AREA AS THE COOKING FIRE.
TODDLERS, YOUNG CHILDREN, AND OTHERS MAY BE SUSCEPTIBLE TO
ACCIDENTAL CONTACT BURNS AND MUST NOT OPERATE THE COOKING FIRE.
A PHYSICAL BARRIER IS RECOMMENDED IF THERE ARE “AT RISK” INDIVIDUALS
IN THE VICINITY. TO RESTRICT ACCESS TO A FIREPLACE OR STOVE, INSTALL AN
ADJUSTABLE SAFETY GATE TO KEEP TODDLERS, YOUNG CHILDREN, AND OTHER
“AT RISK” INDIVIDUALS OUT OF THE AREA AND AWAY FROM HOT SURFACES.
TAKE CARE WHEN INSTALLING TO PREVENT INJURY AS THIS PRODUCT IS HEAVY.
ALWAYS WEAR THE GLOVES PROVIDED WHEN OPERATING THE APPLIANCE.
IMPROPER DISPOSAL OF ASHES MAY RESULT IN FIRES.
CRACKED, BROKEN, EXTENSIVELY CORRODED OR BUCKLED COMPONENTS MAY
RENDER THE INSTALLATION UNSAFE.
DO NOT OVER FIRE THE APPLIANCE FOLLOW FIRE LOADING GUIDELINES.
DO NOT STORE CHEMICALS OR FLAMMABLE MATERIALS NEAR THIS APPLIANCE.
DO NOT SPRAY AEROSOLS NEAR THIS APPLIANCE.
A Installation Process and Product Details 5
A1 Product Description 5
A2 Product Dimensions 5
B Safety Clearances to Combustibles 8
B1 Clearances to Combustible Surfaces 8
C Non-Combustible Cavity Installation 9
C1 Minimum Requirements of the Cavity 9
C2 Sealing Requirements 10
D Installing the Flue System 11
D1 Flue Specifications 11
E Assembling and Installing the Fireplace 12
E1 Gather Installation 12
E2 Securing the Base of the Appliance 13
E3 Assembling the Fireplace 14
E4 Attaching and Removing the Pivot Drawer 15
E5 Using the Weather Cover (Optional Accessory) 15
F Burning Guide 16
F1 Fuel Selection 17
F2 Starting the Fire 17
F3 Loading the Fire 17
F4 Extinguishing the Fire 17
G Cooking Guide 17
G1 Cast Iron Instructions 18
G2 Storage 18
G3 Optimal Ember Generation 18
G4 Cooking on the Fire 18
H Maintenance 20
H1 Chimney Maintenance 21
H2 Recommended Refurbishment Products 21
I General Warranty Terms and Conditions 21
BACDEFG
5
IH
EK Installation Manual 630451_1
A Installation Process and Product Details
A1 Product Description
The EK series is an outdoor cooking wood fire with the ability to seamlessly transform from a cooking
appliance into a fireplace for entertainment. It is designed for outdoor use ONLY.
A2 Product Dimensions
The EK series consists of three dierent sizes of fireplace: the EK950, the EK1250, and the EK1550.
Dimensions for each fireplace can be found on the next pages.
For more detail, view architectural drawings at www.escea.com.
EK950
Flue: 350 ID
501423
530
375
121
666
137 638
14
14
1543
920
948
188
997
WEIGHT: 300KG
B
AC ED F G H I
6
EK1250
Flue: 350 ID
1219
1247
188
1296
1423 50
530
375
111
137
638
666
14
14
1543
WEIGHT: 380KG
BACDEFG
7
IH
EK Installation Manual 630451_1
EK1550
Note: The EK1550 requires two flues to function properly - this is mandatory.
Flue: 350 ID Flue: 350 ID
501423
375
530
121
666
638
137
14
14
1543
1519
1547
355 355
188
1596
WEIGHT: 450KG
B
AC ED F G H I
8
B
AC ED F G H I
8
B Safety Clearances to Combustibles
B1 Clearances to Combustible Surfaces
Note: The concrete structure shown below must comply with section “C1 Minimum Requirements of the
Cavity” on page 9.
BACDEFG
9
IH
EK Installation Manual 630451_1
B ACDEFG
9
IH
C Non-Combustible Cavity Installation
C1 Minimum Requirements of the Cavity
This appliance is designed for outdoor use ONLY.
When the appliance forms part of a building, or is installed attached to the building, then the entire
appliance must be fully enclosed in concrete material (concrete block and/or poured concrete) of
140mm thickness or greater.
Cladding over the concrete cavity can consist of any heat resistant material.
When the appliance is installed in a remote, freestanding structure that is not attached to or
encompassed within the envelope of the building and is at least 2000mm from any combustible
material in any direction, then the enclosure may be constructed from any heat resistant material.
If any combustible material is within 2000mm of the fire in any direction, then the enclosure must
comply with the concrete structure specified above.
Platform Minimum Requirements
The platform must be installed at a height to satisfy the requirements listed in section “B1 Clearances
to Combustible Surfaces” on page 8.
View looking down on cavity from above
Appliance Minimum Clearances
View looking down on cavity from above
B
AC ED F G H I
10
B
ACED F G H I
10
Venting Minimum Requirements
The air vent(s) can be any size or shape, provided that the total combined open surface area is at least
28000mm2.
Note: The EK1250/EK950 are shown as an example; the EK1550 requires two flues.
C2 Sealing Requirements
All joints in the flue system and between the gather / chassis should be sealed with a suitable high
temperature fire cement (able to operate at temperatures greater than 500°C) sealant / cement.
Appliance
Opening
A total open surface area of
greater than 00mm no280 2
higher than 300mm from the
base of the appliance to vent
the cavity
300mm
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels Escea Cheminée intérieure
Escea
Escea EF5000 Instructions d'installation et d'entretien
Escea
Escea DX1500 Manuel utilisateur
Escea
Escea EF5000 Manuel utilisateur
Escea
Escea DF700 Guide rapide
Escea
Escea DN1150 Corner 400 Manuel utilisateur
Escea
Escea NBS5525 Instructions de montage
Escea
Escea IB1100 Manuel utilisateur
Escea
Escea DL850 Manuel utilisateur
Escea
Escea EK950 Mode d’emploi
Escea
Escea EF5000 Manuel utilisateur
Escea
Escea DS 1900 Instructions d'installation et d'entretien
Escea
Escea DX1500 Manuel
Escea
Escea ST900 Manuel utilisateur
Escea
Escea FS730 Manuel utilisateur
Escea
Escea IB850 Manuel utilisateur
Escea
Escea IB850 Manuel utilisateur
Escea
Escea EK950 Manuel utilisateur
Escea
Escea AF series Guide rapide
Escea
Escea IB850 Manuel utilisateur
Escea
Escea EW5000 Manuel utilisateur
