Escali M-Series Manuel utilisateur

DIGITAL COUNTING SCALE

M - Series

OPERATING MANUAL

INTRODUCTION

Congratulations on your purchase of our Multifunctional Scale.

In order to ensure the scale continues to deliver peak performance, please

read these operation instructions carefully and thoroughly prior to initial usage.

IMPORTANT

1. Read all instructions before operating the scale.

2. Follow the basic safety precautions for all office equipment when using this

scale.

3. The manufacturer does not warrant this unit to be waterproof. Do not

expose this product to rain or moisture.

4. Do not use the scale in direct sunlight. Keep it away from heating

appliances such as an oven, stove, etc.

5. This scale does not contain any user-serviceable parts. Do not

disassemble.

5. Use the scale for its intended purpose only.

Note: The display value may be affected by electromagnetic influences, e.g.

when a radio is operated in the immediate vicinity of the device. The product

can be used for its intended purpose again when the interference is

discontinued, but may need to be switched on again to re-start.

BATTERY INSTALLATION

1. Turn the entire scale upside down and reset it securely on a firm, flat surface.

2. Open the battery door by loosing the battery door screw.

3. Install four UM2 size C batteries in the battery compartment, ensuring that the

positive/negative side is in the direction as shown in the cabinet.

4.Close the battery door and fasten it with the screw.

BATTERY STATUS

•When the battery is low, “Lo” will be displayed. Open the battery compartment and

replace the old batteries with new ones.

•Used batteries must not be disposed of as household waste. Do not incinerate

batteries because they might explode at high temperature. Contact your local authority

for information concerning reclamation and disposal of batteries.

•When replacing batteries, always use brand new batteries of the same type.

AC/DC ADAPTOR (Optional)

1. Open the Adaptor cabinet door.

2. Plug the adaptor jack into the socket.

3. Take out the adaptor and close the cabinet door.

4. Plug the adaptor to the AC main.

PART AND KEY DESCRIPTION

1) Stainless Steel Platform

2) Bubble Leveler

3) Liquid Crystal Display (LCD)

4) Keypad

5) Battery Door and Compartment

6) Main power On/off Switch

7) Adaptor door

8) AC/DC adaptor socket

9) AC/DC adaptor (optional)

10) Level adjusting feet

(6)

Main Power

On/Off Switch

(7)

Adaptor Door

(9)

AC/DC adaptor

(8)

AC/DC Adaptor

Socket

(10)

Level Adjusting

feet

(5)

Battery Door

and Compartment

Bubble

Leveler

(2) LCD

Display

(3) Keypad

(4)

(1)

Stainless Steel

Platform

OPERATION

LEVEL THE SCALE

When the scale is put to use at a new place, adjust the level of the scale by turning the 4

level adjusting feet until the bubble is located in the middle position of the bubble leveler.

ACTIVATING THE SCALE

1. Turn on the “power on/off switch”

2. Turn the scale on by pressing “ON/OFF” key

2. The LCD screen will show all characters for a few seconds and then “0.000►” will be

shown on the display.

3. The scale turns off automatically after being idle for two minutes.

EL BACK LIGHT

Your can turn On or Off the Back light of the scale by pressing the “Back Light” key

WEIGHING AN ITEM

1. Turn on the scale.

2. Place an item on the platform and the exact weight of item will be displayed.

SELECTING WEIGHT UNIT

When the scale is power on, press the “MODE” key repeatedly to change weight unit

according to following sequence:

kg --- lb --- oz --- lb/oz

Displays 4 modes, e.g. “kg” mode F1.500kg

“lb” mode F3.32lb

“oz”modeF52.9oz

”lb/oz mode F3lb 4.9oz

USING THE HOLD FUNCTION

When the object is on the scale platform, press the “HOLD” key once and then take off the

object from the scale platform. the weight of the object will be hold for 1 minute with a

HOLD icon displays on the left side of the LCD.

USING THE TARE MODE:

1. Turn the scale on.

2. “0.000►” will be shown on the display after a few seconds.

3. Place an item on the weighing platform and read the value accordingly.

4. Press the “TARE” key, the weight of this item will be eliminated and the reading will

change to “0.000►”.

5. Place next item on the weighing platform and get the reading.

6. Press “TARE” key again will show the total weight

7. Repeat step (4) to (6) for further objects.

Note: The scale will display a negative reading when you remove all items. Press the

“Tare” key once and the negative reading will disappear.

USING THE COUNTING MODE::

A. Set sample size:

1. Turn on the scale

2. Press “PCS” key, SET will be shown on the display.

3. Press “MODE” key, 100 will be displayed.

4. Press “MODE” key again to select the sample size in the sequence of

10 →20 →40 →60 →80 →100.

5. Press “PCS” key to confirm the sample size. “pcs” icon will be shown on the left

hand corner of the display.

6. Press “PCS” again to return to weighing mode.

Remark: the sample weight is memorized in the scale. You only need to repeat steps

(2),(4) and (5) for different objects or sample size

B. COUNTING:

1. Turn on the scale

2. Place the samples on the platform

3. Press the “PCS” key, the sample size as set by the above setting steps will be

displayed.

4. Place objects on the platform, the scale will calculate and shown the numbers on

the LCD.

Remark: by pressing the “TARE” key will activate the accumulation of counting. See Tare

Mode steps.

OVERLOAD

When the loading capacity exceeds the maximum capacity of the Digital Scale, the word

“EEEEE” will be displayed on the LCD screen. Remove the item(s) from the scale platform

to avoid damage to the scale.

POWER OFF

1. The scale can be powered off manually by pressing the “On/Off” key.

2. The scale will be totally shut down by pressing the power switch.

MAINTENANCE

Clean with a soft cloth. Do not immerse directly into water or detergent, scrub with

abrasive material or use corrosive cleanser.

TECHNICAL SPECIFICATIONS

M63 M136 M3315 M6630

Maximum Capacity 3kg / 6lb 6kg / 13lb 15kg / 33lb 30kg / 66lb

Graduation 0.5g / 0.1oz 1g / 0.1oz 5g / 0.2oz 5g / 0.2oz

Sample size 10 / 20 / 40 / 60 / 80 / 100 pcs

Operating Temperature 0°C ~ +40°C

Power Source 4 UM2 size C 1.5V battery or

9.0V 300mAAC/DC adaptor (optional)

Accuracy 0.2%

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Escali Échelle

Escali

Escali Passo Manuel utilisateur

Escali

Escali Track & Target USTT180 Manuel utilisateur

Escali

Escali MS-SERIES Manuel utilisateur

Escali

Escali E184 Manuel utilisateur

Escali

Escali Arti Manuel utilisateur

Escali

Escali B180SB Manuel utilisateur

Escali

Escali USHM180G Manuel utilisateur

Escali

Escali USHM180G Manuel utilisateur

Escali

Escali BF180 Manuel utilisateur

Escali

Escali Arti Manuel utilisateur

Escali

Escali Primo P115 Manuel utilisateur

Escali

Escali Aqua Manuel utilisateur

Escali

Escali Vera PR2000S Manuel utilisateur

Escali

Escali S200 Manuel utilisateur

Escali

Escali ECO180 Manuel utilisateur

Escali

Escali 63DK Manuel utilisateur

Escali

Escali BFBW200 Manuel utilisateur

Escali

Escali US200L Manuel utilisateur

Escali

Escali SmartConnect SC115KS Manuel utilisateur

Escali

Escali B200 Manuel utilisateur

Escali

Escali 2210IB Manuel utilisateur

Escali

Escali 25 Lb Manuel utilisateur

Escali

Escali SmartConnect SC115KS Manuel utilisateur

Escali

Escali POP Manuel utilisateur

Manuels Échelle populaires d'autres marques

AWS

AWS ZEO-50 Manuel utilisateur

Gima

Gima Glass Body Fat Analyzer Manuel de la liste des pièces

Seca

Seca 374 Manuel utilisateur

TEC

TEC TEC SL59 SERIES Manuel utilisateur

Axis

Axis B/E Series Manuel utilisateur

Alecto

Alecto ACW-40 Manuel utilisateur

Rice Lake

Rice Lake MSI-4260 IS Manuel utilisateur

IKA

IKA RCT basic safety control Manuel utilisateur

ADE

ADE M20011 Manuel utilisateur

Duronic

Duronic KS3000 Manuel utilisateur

Digi

Digi SM-720 Manuel utilisateur

Cardinal

Cardinal CS Series Manuel utilisateur

Korona

Korona Kastella Manuel utilisateur

A&D

A&D FC-50Ki Manuel utilisateur

BDA

BDA CAMARGUE Manuel utilisateur

Tanita

Tanita HD-357 Manuel utilisateur

Leifheit

Leifheit 03173 Manuel utilisateur

Lumme

Lumme LU-1340 Manuel utilisateur