
• Please carefully read all instructions before attempting installation. If you do not understand the
instructions or have any concerns or questions, please contact Technical Support at
CAUTION: Avoid potential personal injuries and property damage!
• Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed
weight capacity. We are not liable for damage or injury caused by improper mounting, incorrect
assembly or inappropriate use.
• This product contains gas assist arms which are under pressure. Do not puncture these arms or
expose the arms to high heat.
• If the product arrives defective or is missing parts, please contact ErgoAV Customer Support at
• Do Not use this product on desks made of particle board or other soft woods.
• The information contained in this manual does not cover all possible conditions or variables in
relation to the install of this product.
Check the VESA Pattern of Your Monitor before the Installation
Important Safety Information
If your monitor's VESA Pattern is smaller than 75mm x 75mm/3” x 3” or greater than
100mm x 100mm/4” x 4”, this mount is NOT COMPATIBLE with your monitor.
find a compatible mount.
Weight Restrictions
4.4~22 lbs.
MAX
Per Arm
(2.0~10.0 kg)
If your monitor weighs
more, this mount is
NOT compatible. Monitor
should not exceed
maximum listed weight.
WARNING
DO NOT exceed the maximum weight indicated. This mounting
system is intended for use only within the weight range listed. Use
with products heavier than the maximum weight limit may result in
failure of the mount, causing potential damage and or injury.
It is the responsibility of the installer to verify the total weight of
the monitors and any accessories attached. Do Not exceed the
weight limit listed.
W
HMinimum: 75mm x 75mm/3”x 3”(WxH)
Maximum: 100mm x 100mm/4”x 4”(WxH)
Measure Your Monitor's VESA Pattern: