Epson FX-1180 - Impact Printer Manuel utilisateur

EPSON Remote

Configuration Manager

The EPSON Remote Configuration Manager lets you change the

printer’s default settings, update the printer with the new settings,

and sa e them in a configuration file which you can use any time.

This is especially con enient in a multi-printer network en ironment;

indi idual configuration files can be created for each printer’s specific

application requirements. The program works on these printers:

❏FX-880+

❏FX-880+ in Okidata® mode

❏FX-1180+

❏FX-890

❏FX-890 in Okidata mode

❏FX-2190

❏FX-2190 in Okidata mode

❏LQ-590

❏LQ-2090

Note:

If you are using Windows 2000 and the printer is connected to the parallel

port, Remote Configuration Manager may not work. In this case, do one of

the following:

❏efore running the program, set the printer driver to the LPT2 port.

Then use Remote Configuration Manager to check or change the default

settings as described in this book. After you finish using the program,

remember to return the setting to LPT1.

❏Connect the printer to the US port instead.

Starting the Program

1. From the Start menu, select Programs (or All Programs),

Epson Remote Configuration Mgr, and then click

Epson Remote Configuration Manager.

You see this window:

2. Select Create New Configuration and click OK. (If you want to

make changes to a configuration file that was created earlier, see

“Using an Existing Configuration File” on page 9.)

You see the printer model window:

3. Turn the printer off, wait a moment, and turn it back on.

4. Choose your printer from the list and click Select. If you are

using your printer in Okidata mode, be sure to select the Oki

ersion for your printer.

You see the Remote Configuration Manager screen:

You can change settings in the Basic tab (shown abo e) and the

Ad anced tab. If you select the Ad anced tab, you see this

message:

5. Click OK to display the Ad anced tab settings:

See the following section to change the settings.

Changing the Printer Settings

1. Double-click the setting you want to change or select it from the

list and click the Change Setting button. You see a window like

this:

2. Select the alue you want from the pull-down list or enter the

setting you want and click OK.

If you decide not to change a setting, click Cancel.

Note:

For more information about printer settings and options, see your printer

documentation.

When you finish making changes to the settings, you can either

update the printer now with the new settings, as described below,

or sa e the settings in a configuration file to be used in the future

(see page 8).

Important: You must update the printer for the settings to take

effect.

Updating the Printer With the New Settings

When you want the printer to use the new settings, you must update

it as follows:

1. If the configuration file you want to use is not already open,

open it now as described on page 9.

2. Click the Update Printer button. If the file has not been sa ed,

you see this message:

If you want to sa e your changes, click Yes Enter a name for

the file (keeping the extension cfg), and click Save. (See “Sa ing

the Configuration File” on page 8 for more information.)

If you don’t need to sa e your changes, click No.

You see this window:

3. Make sure the correct interface is selected for your printer

(Parallel, USB, TCP/IP, or Serial) and click Update.

If you did not select the correct interface, or if the printer is not

turned on or connected properly, you see one of these messages:

Make sure the printer is connected properly and turned on. Then

click Yes or OK to update the printer.

Note:

You may need to click the Update button again (step 2).

You see this window:

4. Click OK. The control panel lights flash and the print head

mo es to show that the settings ha e been changed.

The new settings remain in effect until you select another

configuration file or restore the default settings.

Saving the Configuration File

If you want to sa e the changes you ha e made to the printer settings

in a configuration file, do one of the following:

❏To sa e a new configuration file or o erwrite the current one

with the new settings, click Save Configuration. If you are

making changes to an existing file, the new settings o erwrite

the original ones.

If this is a new file, you see this message:

Enter a new name for the configuration file and a description

of it, if desired. Then click Save. Make sure the extension

remains cfg.

❏To sa e the file with a new name so you don’t o erwrite the

open one, select Save As from the File menu. Enter a new name

for the configuration file and click Save. Make sure the

extension remains cfg.

Configuration files are sa ed in this directory:

Program Files\Epson Remote Configuration\Setting

Note:

If you want to remove a configuration file, delete it from the \Setting

directory.

Type a file name with

the extension .cfg

Type a description of

the file, if desired

Using an Existing Configuration File

If you already created a configuration file, you need to open it to:

❏Check its settings

❏Change one or more settings

❏Update the printer with the configuration file settings

Follow these steps:

1. Start the Remote Configuration Manager.

2. When you see the first screen (shown below), click the

Open Existing Configuration button and click OK.

You see a window like this:

3. Choose the file you want to open and click Select. You see the

EPSON Remote Configuration Manager screen, shown on

page 3.

Now you can change any settings, if necessary. If you want to

sa e your changes, click the Save Configuration button or select

Save As from the file menu.

4. When you are ready to update the printer with the current

settings, click the Update Printer button.

Restoring Original or Default Settings

If you made changes in the open configuration file but then change

your mind, you can restore the original settings or the factory default

settings:

❏To restore the original sa ed settings, click the Restore Setting

button or select Restore Setting from the File menu. You see this

message:

Click OK.

❏If you want to restore the factory default settings for all the

options, select Factory Setting from the Option menu. When you

see the confirmation message, click OK.

Autres manuels pour FX-1180 - Impact Printer

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Epson Logiciel

Epson

Epson EasyMP Network Projection Manuel utilisateur

Epson

Epson BrightLink 455Wi Manuel utilisateur

Epson

Epson 4000 - Stylus Pro Color Inkjet Printer Dimensions

Epson

Epson EMP 7800 Manuel utilisateur

Epson

Epson 826W - PowerLite WXGA LCD Projector Manuel utilisateur

Epson

Epson 10600 - Stylus Pro Color Inkjet Printer Manuel utilisateur

Epson

Epson Stylus Pro 10000 Series Manuel utilisateur

Epson

Epson PowerLite 4650 Manuel utilisateur

Epson

Epson M00002112 Manuel

Epson

Epson ChromaBlast v1.0 Manuel utilisateur

Epson

Epson PowerLite Pro Z8250NL Manuel utilisateur

Epson

Epson 3800 - Stylus Pro Color Inkjet Printer Manuel utilisateur

Epson

Epson Perfection 3200 Guide de démarrage rapide

Epson

Epson PowerLite 470 Manuel utilisateur

Epson

Epson EasyMP Multi PC Projection Manuel utilisateur

Epson

Epson Stylus RIP Manuel utilisateur

Epson

Epson WorkForce Pro WP-4015 DN Manuel utilisateur

Epson

Epson PowerLite 84+ Manuel utilisateur

Epson

Epson BrightLink 455Wi Manuel utilisateur

Epson

Epson BrightLink 455Wi Manuel utilisateur

Epson

Epson C82357 Manuel utilisateur

Epson

Epson PowerLite 4650 Manuel utilisateur

Epson

Epson Stylus Pro 9500 - Print Engine Dimensions

Epson

Epson PowerLite 1760W Manuel utilisateur

Manuels Logiciel populaires d'autres marques

COMPRO

COMPRO COMPROFM Manuel utilisateur

Muratec

Muratec OFFICEBRIDGE ONLINE Manuel utilisateur

Oracle

Oracle Contact Center Anywhere 8.1 Manuel utilisateur

Adobe

Adobe 65007312 - Photoshop Lightroom Manuel

Avaya

Avaya NULL One-X for RIM Blackberry Manuel utilisateur

HP ProLiant BL420c Manuel utilisateur

PS Audio

PS Audio PowerPlay Manuel du propriétaire

Brady

Brady LOCKOUT PRO 3.0 Manuel de service

Avaya

Avaya Interaction Center Manuel utilisateur

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Manuel

Novell

Novell GROUPWISE 8 - INTERNET AGENT Manuel utilisateur

Oracle

Oracle Application 9i Manuel utilisateur

Acer

Acer RDM Manuel utilisateur

Canon

Canon Vixia HF21 Manuel utilisateur

Canon

Canon ZR950 Manuel utilisateur

Samsung

Samsung Auto Backup Manuel utilisateur

Polycom

Polycom Vortex EF2201 Instructions d'installation et d'utilisation

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Manuel utilisateur