Epson PowerLite 84 Manuel du système

Autres manuels pour PowerLite 84

4

Table des matières

Autres manuels Epson Projecteur

Epson

Epson EMP-1700 Manuel utilisateur

Epson

Epson MovieMate 30s Fiche technique

Epson

Epson PowerLite Home Cinema 3100 Fiche technique

Epson

Epson AP-60 - Projector Sound Solution Manuel utilisateur

Epson

Epson EMP 730 Manuel utilisateur

Epson

Epson EB-810E Manuel utilisateur

Epson

Epson EMP-7550 - XGA LCD Projector Manuel utilisateur

Epson

Epson EB-S11 Manuel utilisateur

Epson

Epson PowerLite 810p Manuel utilisateur

Epson

Epson EasyMP EMP-735 Manuel utilisateur

Epson

Epson PowerLite 420 Manuel utilisateur

Epson

Epson PowerLite 9300i Fiche technique

Epson

Epson EH-TW5100 Manuel utilisateur

Epson

Epson EH-TW5900 Manuel utilisateur

Epson

Epson EB-X14G Manuel utilisateur

Epson

Epson Megaplex MG-50 Manuel utilisateur

Epson

Epson PowerLite 715c Fiche technique

Epson

Epson Home Cinema 2200 Manuel utilisateur

Epson

Epson MOVIEMATE 72 Manuel utilisateur

Epson

Epson PowerLite 5600p Dimensions

Epson

Epson PowerLite Pro Z8000WUNL Guide de référence

Epson

Epson LightScene EV-105 Manuel utilisateur

Epson

Epson V11H268220 - PowerLite 1716 XGA LCD... Manuel utilisateur

Epson

Epson Elp-3500 Manuel utilisateur

Manuels Projecteur populaires d'autres marques

iEmmet

iEmmet MP-312 Manuel utilisateur

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuel utilisateur

Sony

Sony VPL-HW65ES Manuel de service

Toshiba

Toshiba TLP-791U Manuel utilisateur

Philips

Philips LC1341 Guide de référence

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur

NEC

NEC NP600S EDU Manuel utilisateur

BenQ

BenQ SH753P Manuel utilisateur

Eiki

Eiki EK-623U series Manuel utilisateur

Christie

Christie LHD700 Manuel utilisateur

Navitar

Navitar FX Manuel utilisateur

InFocus

InFocus LitePro 560 Manuel utilisateur

Sony

Sony SRX-R815P Manuel utilisateur

Vivitar

Vivitar DP1500 X Manuel utilisateur

Acer

Acer C20 Series Manuel utilisateur

Asus

Asus ZenBeam Latte Manuel utilisateur

BOXLIGHT

BOXLIGHT CP-322i/CP-634i Manuel utilisateur

JVC

JVC 1108TTH-AO-AO Manuel utilisateur

INSTALLATIONHANDBOOK

Lamp and Status Information

Epson PowerLite 84

Replacing the Lamp

The life span of the projection lamp is about 5000 hours if

BrightnessControlin the Setting menu is set to High (default), and

6000 hours if BrightnessControlis set toLow.

It is time to replace the lamp when:

The projected image gets darker or starts to deteriorate.

The message Replace the lamp appears on the screen when the

lamp comes on and the lamp warning light ashes orange. To

maintain projector brightness and image quality, replace the lamp

as soon as possible.

The lamp warning light ashes red (the lamp is burnt out).

Contact your dealer or call Epson at 800-GO-EPSON

(800-463-7766). Request part number V13H010L50.

Replacing the Lamp

1. Turn o the projector.

2. When the Ppower light stops ashing, unplug the power cord.

3. Let the projector cool for at least an hour (if it has been on). The

lamp is extremely hot immediately after use.

4. Loosen the lamp cover screw (you can’t remove it). Then slide the

lamp cover and lift it o of the projector.

INSTALLATION HANDBOOK

Lamp and Status Information

Epson PowerLite 84

5. Loosen the two screws holding the lamp in place (you can’t

remove them).

Loosen, but don’t

remove these screws

6. Hold the lamp as shown and pull it straight out.

7. Gently insert the new lamp. (If it doesn’t easily, make sure it is

facing the right way.)

8. Push down the side marked PUSH until it snaps in.

note

The lamp(s) in this

product contain mercury.

Please consult your state and

local regulations regarding

disposal or recycling. Do not

put in the trash.

INSTALLATION HANDBOOK

Lamp and Status Information

Epson PowerLite 84

9. Once the lamp is fully inserted, tighten its screws.

10. Replace the lamp cover, then tighten its screw.

11. Reset the lamp timer as described page.

Resetting the Lamp Timer

After you replace the lamp, you need to reset the lamp timer using the

projector’s menus.

1. Press the

Menubutton on the remote control or on the

projector’s control panel. You see the main menu.

2. Use the buttons on the remote control (or the arrow buttons

on the projector) to highlight Reset, then press Enter.

You see this screen:

3. Select

Reset Lamp Hoursand press Enter.

4. When you see the prompt, select Yes and press Enter.

5. When you’re nished, press Esc or Menuto exit the Menu

system.