Epson TM-L90-i Manuel utilisateur

User’s Manual / Manuel de l’utilisateur

Standards and Approvals

The following standards are applied only to the products that are so labeled. (EMC is tested using

the Epson power supplies.)

North America: FCC Class A, CAN ICES-3 (A)/NMB-3 (A)

WARNING

The connection of a non-shielded interface cable to this device will invalidate the EMC standards

of this device. You are cautioned that changes or modifications not expressly approved by Seiko

Epson Corporation could void your authority to operate the equipment.

FCC Compliance Statement for American Users

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and

used in accordance with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause harmful

interference, in which case the user will be required to correct the interference at his own expense.

For California Customers Only

The lithium batteries in this product contain Perchlorate Material -

special handling may apply.

See www.dtsc.ca.gov/hazardouswaste/perchlorate.

Important Safety Information

This manual presents important information intended to ensure safe and effective use of this

product. Read this manual carefully and store it in an accessible location.

Key to Symbols

The symbols in this manual are identified by their level of importance, as defined below. Read the

following carefully before handling the product.

!WARNING:

Warnings must be observed carefully to avoid serious bodily injury.

!CAUTION:

Cautions must be observed to avoid minor injury to yourself, damage to your equipment, or loss of

data.

QNote:

Notes have important information and useful tips on the operation of your product.

Safety Precautions

!WARNING:

❏

If this product produces smoke, a strange odor, or unusual noise, immediately unplug the

AC cable, and then contact your dealer or an Epson service center for advice. Continued

use may lead to fire or electric shock.

❏

Do not use this product with any voltage other than the specified one. Doing so may lead

to fire or electric shock.

❏

Do not connect the cables in ways other than those specified in the manuals. Different

connections may cause equipment damage or fire.

❏

Do not use this product where inflammable fumes of gasoline, benzine, thinner, or other

inflammable liquids may be in the air. Doing so may cause an explosion or fire.

❏

Do not use aerosol sprayers containing flammable gas inside or around this product.

Doing so may cause fire.

❏

If water or other liquid spills into this product, immediately unplug the AC cable, and then

contact your dealer or an Epson service center for advice. Continued use may lead to fire

or shock.

❏

Do not allow foreign objects to fall into this product. Penetration by foreign objects may

lead to fire or electric shock.

❏

Never attempt to repair this product yourself. Improper repair work can be dangerous.

❏

Never disassemble or modify this product. Tampering with this product may result in

injury, fire, or electric shock.

English

!CAUTION:

❏

Do not use this product in locations subject to high humidity or dust levels. Excessive humidity

and dust may cause paper jams and other problems, such as fire, or electric shock.

❏

Be sure to set this product on a firm, stable, horizontal surface. The product may break or cause

injury if it falls.

❏

Do not stand on or place heavy objects on top of this product. Equipment may fall or collapse,

causing breakage and possible injury.

❏

The print head can be very hot during and immediately after printing. If you need to touch it, such

as for cleaning, wait until it cools down. Touching it before that may cause burns.

❏

Do not connect a telephone line to the drawer kick connector. There is a risk of the telephone line

or product being damaged.

❏

To ensure safety, unplug this product before leaving it for an extended period.

❏

Take care not to injure your fingers on the manual cutter

• When you remove printed paper

• When you perform other operations such as loading/replacing roll paper

Caution Labels

The caution labels on the product indicate the following precautions.

!KCAUTION:

The thermal head can be very hot during printing and immediately after printing. Touching it may

cause burns.

!CAUTION:

When connecting external devices to the USB ports, follow the precautions below.

❏

Confirm the rated current of the external devices by checking the descriptions on the devices or

manuals. Connect the external devices only when those total rated current is less than 600 mA.

Do not use a device whose rated current is unclear.

❏

Use UL-approved external devices (only for North American users).

English

Unpacking

The following items are included with the standard specification printer. If any item is damaged,

contact your dealer.

❏Printer

❏AC adapter

❏Control panel label for vertical installation

❏Roll paper spacer

❏Power switch softcover

❏User’s Manual (this manual)

Printer Parts

Interface

All the ports and connectors are located on the back of the printer.

Cutter cover

Control panel

Roll paper cover

Power switch

Manual cutter

Cover open lever

Ethernet port microSD card slot

DC-in connector

Drawer kick connector

USB host portsr USB device port

English

Control Panel

(Power) LED

Lights when the power is on, and is off when the power is off.

Error LED

Off when the printer is online, lights when the printer is offline, and flashes when an error occurs.

Paper LED

Lights when roll paper is out.

Feed button

Feeds the roll paper.

Setup

Installing the Printer Horizontally or Vertically

You can install the printer horizontally (with the paper exit on top) or vertically (with the paper

exit at the front). 

When installing the printer vertically, attach the included control panel label to the printer case,

and install it on a flat surface.

Removing or Installing the Paper Guide

Install or remove the paper guide to match the width of the roll paper in use.

A 58 mm paper guide is installed.

• When using a roll paper that is 58 mm wide, use the printer as it is.

• When using a roll paper that is 80 mm wide, remove the installed guide.

• When using a roll paper that is 40 mm wide, remove the installed guide, and install the included 40 mm

paper guide.

English

!CAUTION:

Changing to a roll paper that is wider than the roll paper in use can cause decreased print quality.

Removing the Paper Guide

1. Open the roll paper cover using the cover open lever.

2. Pull the paper guide in the direction of the arrow in illustration while pulling the lever of the paper guide

to remove it.

Installing the Paper Guide

!CAUTION:

Installation position of the paper guide varies depending on the width of the paper guide. Do not

install the 58 mm paper guide in the position for the 40 mm paper guide.

English

1. Open the roll paper cover using the cover open lever.

2. Align the projection of the paper guide with the hole in the roll paper holder.

3. Align the corner of the paper guide with the notch in the roll paper holder.

58 mm

40 mm

58 mm

English

4. Align 2 holes in the paper guide with 2 projections of the roll paper holder.

5. Push the lever of the paper guide down until the paper guide clicks into place.

Connecting Cables

Remove the printer cover to connect the cable.

Removing the Cover

1. Place the printer as shown in illustration, and pull the cover in the direction of the arrow in the

illustration to remove the cover.

Autres manuels pour TM-L90-i

Table des matières

Langues :

Autres manuels Epson Imprimante

Epson

Epson LQ-510 Manuel utilisateur

Epson

Epson U230 - TM Two-color Dot-matrix Printer Mode d’emploi

Epson

Epson Stylus Color 500 Manuel utilisateur

Epson

Epson SureColor T-7270 Manuel utilisateur

Epson

Epson SureColor P800 Guide d'installation

Epson

Epson Stylus C40UX Manuel utilisateur

Epson

Epson ET-2830 Series Manuel utilisateur

Epson

Epson Stylus Pro 7400 Manuel utilisateur

Epson

Epson Action Scanner II Manuel utilisateur

Epson

Epson Stylis Pro 9860 Manuel utilisateur

Epson

Epson Stylus Color 640 Manuel utilisateur

Epson

Epson R1800 - Stylus Photo Color Inkjet Printer Manuel utilisateur

Epson

Epson U200 - TM B/W Dot-matrix Printer Manuel utilisateur

Epson

Epson Stylus C86 Mode d’emploi

Epson

Epson Stylus Office BX925FWD Guide de l'utilisateur

Epson

Epson WF-C878RDWF Manuel utilisateur

Epson

Epson Stylus Pro 4900 Manuel utilisateur

Epson

Epson Stylus Color 760 Manuel d'installation et d'exploitation

Epson

Epson AcuLaser M2000D Manuel utilisateur

Epson

Epson WorkForce WF-M1030 Mode d’emploi

Epson

Epson EPL-N1200 Manuel utilisateur

Epson

Epson PictureMate Dash PM 260 Manuel utilisateur

Epson

Epson Stylus Photo 1410 Series Manuel utilisateur

Epson

Epson TM-S9000MJ Manuel utilisateur

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur

IRA3D

IRA3D POETRY4 Manuel utilisateur

Ricoh

Ricoh Aficio AP400 Manuel utilisateur

BIXOLON

BIXOLON SRP-352plusV Manuel utilisateur