Epson Stylus Pro XL Manuel utilisateur

EPSON COLOR INKJET PRINTER

Stylus Pro XL+

SERVICE MANUAL

EPSON 4006101

PREFACE

This document provides supplementary information to describe the Stylus Pro XL+, which is a follow-on version

of the Stylus Pro XL. Therefore, you must refer to this information in conjunction with the Stylus Pro XL Service

Manual for details on any subjects common to both printers.

REVISION SHEET

Revision Issue Date Revision Page

A March 15, 1996 - 1st issue

-ii-

1.1 FEATURES

The Stylus Pro XL+ is a high-quality, high-performance color ink jet printer. This printer is provided with a

standard bidirectional parallel interface suitable for the Microsoft®Windows™ 95 environment and a serial

interface for the Macintosh. The main components and case of this printer are similar to the Stylus Pro XL.

The main features are:

❒High-quality color printing 720 dpi printing using EPSON Micro Dot mode

720 dpi printing on:

plain paper

EPSON premium paper

transparencies

❒High print speed 720 dpi printing of raster graphics at 200 cps

❒Built-in-3 I/F Bidirectional parallel interface (IEEE-1284 nibble mode)

Mac serial interface

Type-B interface (optional)

❒Ink out / low indicators Black and color ink out / ink low indicator LEDs

Stylus Pro XL+ Product Description

Rev.A 1-1

1.2 SPECIFICATIONS

This section provides statistical facts and other detailed information for the printer.

1.2.1 Printing Specifications

The table below shows print speeds and printable columns.

Table 1-1. Print Speed and Printable Columns

Character Pitch Printable Columns Print Speeds (LQ)

10 cpi (pica) 127 200 cps

12 cpi (elite) 152 240 cps

15 cpi 190 300 cps

17 cpi (pica condensed) 218 343 cps

20 cpi (elite condensed) 254 400 cps

Graphics Density Printable Dots Print Speed (10 cpi)

180 dpi ×180 dpi 2289

200 cps

360 dpi ×360 dpi 4578

H — 720 dpi ×V — 360 dpi 9156

720 dpi ×720 dpi 9156

Control codes: ESC/P 2 and expanded raster graphics codes

Input data buffer: 128K bytes

Product Description Stylus Pro XL+

1-2 Rev.A

1.2.2 Ink Cartridge Specifications

Black

Type: Exclusive cartridge

Color: Black

Print capacity: 1170 pages (ECMA132 letter)

Life: The effective life from the indicated production date is 2 years.

Storage temperature: –30 ∼40°C(−22 ∼104°F) Storage under a month at 40°C (104°F)

−30 ∼60°C (−22 ∼140°F) Transit under a month at 40°C (104°F)

−30 ∼60°C (−22 ∼140°F) Transit under 120 hours at 60°C (140°F)

Dimensions (W ×D×H): 26.9 ×67.4 ×41.8 mm (1.06 ×2.65 ×1.65 in.)

Color

Type: Exclusive cartridge

Colors: Cyan, magenta, yellow

Print capacity: 620 pages (5% duty for each color, A4, 360 dpi)

Life: The effective life from the indicated production date is 2 years.

Storage Temperature: –30 ∼40°C(−22 ∼104°F) Storage under a month at 40°C (104°F)

−30 ∼60°C (−22 ∼140°F) Transit under a month at 40°C (104°F)

−30 ∼60°C (−22 ∼140°F) Transit under 120 hours at 60°C (140°F)

Dimensions (W ×D×H): 54.0 ×67.4 ×41.8 mm (2.13 ×2.65 ×1.65 in.)

Notes:

❒

The ink cartridge cannot be refilled; it is the only consumable item in the printer.

❒

Do not use an ink cartridge that has exceeded the ink life.

❒

Ink freezes below

−

C; however, it can be used after it returns to room temperature.

Stylus Pro XL+ Product Description

Rev.A 1-3

1.3 INTERFACE SPECIFICATIONS

The Stylus Pro XL+ comes standard-equipped with two interfaces: an 8-bit bidirectional parallel and an

RS-422 mini-DIN serial interface for the Macintosh. This printer is also equipped with a slot for an optional

Type B interface.

1.3.1 Parallel Interface Specifications

1.3.1.1 Forward Channel

Transmission mode: 8-bit parallel, IEEE-1284 compatibility mode

Synchronization: By STROBE pulse synchronization

Handshaking: By BUSY and ACKNLG signals

Signal level: TTL compatible level

Adaptable connector: 36-pin 57-30360 (Amphenol or equivalent)

Data transmission timing: See Figure 1-7 of the Stylus Pro XL Service Manual.

Note: Transition time (rise time and fall time) of every input signal must be less than 0.2

Transition time (rise time and fall time) of every output signal must be less than 0.12

The printer sets the BUSY signal HIGH before setting either the ERROR signal LOW or the PE signal HIGH.

BUSY is held HIGH until all these signals return to their inactive state. The BUSY signal is active (HIGH)

under the following conditions:

❒During data reception (See Figure 1-7 of the Stylus Pro XL Service Manual..)

❒When the input buffer is full

❒When the INIT input signal is active

❒During initialization

❒When the ERROR is active

❒During self-test

❒During default setting

❒When the parallel interface is not selected

The ERROR signal is active (LOW) under the following conditions:

❒When a paper-out error occurs

❒When a release lever operation error occurs

❒When a hardware error (a fatal error) occurs

The PE signal is active (HIGH) under the following conditions:

❒When a paper-out error occurs

Product Description Stylus Pro XL+

1-4 Rev.A

Table 1-2 shows connector pin assignments and signal functions of the 8-bit parallel interface forward

channel.

Table 1-2. Signal and Connector Pin Assignments for the Parallel Interface

(Forward Channel)

Pin No. Signal

Name Return

GND Pin I/O* Description

1STROBE 19 I

The STROBE pulse is used to read data from the host

computer. Pulse width must be 0.5 µs or more. Normally,

it is HIGH, and data is latched with the rising edge of this

signal.

2-9 DATA 0-7 20 - 27 I

DATA 0-7 are parallel data bits. When one of these

signals is HIGH, the data bit is 1; when LOW, the data bit

is 0. The most significant bit (MSB) is DATA 8. The

signal state must be maintained for 0.5 µs on either side

of the STROBE signal’s active edge.

10 ACKNLG 28 O ACKNLG is a negative pulse indicating that the printer

can accept data again.

11 BUSY 29 O The BUSY signal informs the host computer of the

printer’s status. When this signal is HIGH, the printer

cannot accept any more data.

12 PE 28 O This signal indicates whether paper is available in the

printer or not. A HIGH level indicates no paper.

13 SLCT 28 O This signal is always at HIGH while printer power is on.

14 AFXT 30 I Not used.

31 INIT 30 I If this signal goes LOW, the printer is initialized. The

pulse width of this signal must be 50 µs or more.

32 ERROR 29 O This signal goes LOW if the printer has detected an error.

18 Logic H — O Pulled up to +5 V through 3.9K Ωresistor in the printer.

35 +5 V — — Pulled up to +5 V through 3.3K Ωresistor in the printer.

36 SLIN 30 I Not used.

17 Chassis

GND — — Chassis ground.

16, 33,

19-30 GND — — Signal ground.

15, 34 NC — — Not connected

* The I/O column indicates the direction of the signal as viewed from the printer.

Stylus Pro XL+ Product Description

Rev.A 1-5

1.3.1.2 Reverse Channel

Transmission mode: 8-bit parallel, IEEE-1284 nibble mode.

Synchronization: Refer to the IEEE-1284 specification.

Handshaking: Refer to the IEEE-1284 specification.

Signal level: IEEE-1284 level 1 device (See the forward channel.)

Adaptable connector: The same as for the forward channel.

Data transmission timing: Refer to the IEEE-1284 specification.

Table 1-3 shows connector pin assignments and signal functions of the 8-bit parallel interface for reverse

channel.

Table 1-3. Signal and Connector Pin Assignments for the Parallel Interface

(Reverse Channel)

Pin No. Signal Name Return

GND Pin I/O* Description

1 Host Clk 19 I Host clock signal.

2 - 9 DATA 0 - 7 20 - 27 I

DATA 0-7 signals represent data bits 0 - 7,

respectively. Each signal is at a HIGH level when data

is logical 1 and LOW level when data is logical 0.

These signals are used to transfer the 1284

extensibility request values to the printer.

10 Ptr Clk 28 O Printer clock signal.

11 Ptr Busy / Data

Bit 3, 7 29 O Printer busy signal and reverse channel transfer data

bits 3, 7.

12 Ack Data Req /

Data Bit 2, 6 28 O Acknowledge data request signal and reverse channel

transfer data bits 2, 6.

13 Xflag / Data Bit

1, 5 28 O X-flag signal and reverse channel transfer data bits

1, 5.

14 Host Busy 30 I Host busy signal.

31 INIT 30 I Not used.

32 Data Avail / Data

Bit 0, 4 29 O Data available signal and reverse channel transfer

data bits 0, 4.

36 1284-Active 30 I 1284 active signal.

18 Logic-H — O A HIGH signal indicates that all other signals sourced

by the peripheral are in valid status.

35 +5V — O Pulled up to +5 V via 3.3K Ωresistor.

17 Chassis GND — — Chassis GND.

16, 33,

19 - 30 GND — — Signal GND.

15, 34 NC — — Not connected.

* : The I/O column indicates the direction of the signal as viewed from the printer.

Product Description Stylus Pro XL+

1-6 Rev.A

Extensibility Request: The printer responds affirmatively when the extensibility request values

are 00H or 04H, values that mean —

00H: Request Nibble Mode Reverse Channel Transfer

04H: Request Device ID

Return data using nibble mode reverse channel transfer.

Device ID: The printer sends following device ID string when it is requested.

[00H][39H]

MFG:EPSON;

CMD:ESCPL2-00;

MDL:Stylus Pro XL+;

CLS : PRINTER;

Note: [00H] denotes a hexadecimal value of zero.

1.3.2 Optional Interface Specifications

Type-B interface Level-2 (300 mA type) is supported.

Note : With the simplified serial interface card C82305*, “Disregard a parity bit” setup is not

supported.

Reply message ESC/P 2 is selected

Main-Type: MTP48p,PW127cl10cpi,PRG(VCxxxx)rev,AP300ma

Product-Name: Stylus Pro XL+

Emulation-Type: ESCP-00

Entity-Type: EPSONLQ2

Stylus Pro XL+ Product Description

Rev.A 1-7

Autres manuels pour Stylus Pro XL

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Epson Imprimante

Epson

Epson AcuLaser C1000 Manuel utilisateur

Epson

Epson Stylus C40SX Manuel utilisateur

Epson

Epson L475 Manuel utilisateur

Epson

Epson FX-890IIN Mode d’emploi

Epson

Epson GX-80 Manuel utilisateur

Epson

Epson SureColor F6200 Manuel utilisateur

Epson

Epson LQ-300 - Impact Printer Manuel utilisateur

Epson

Epson EP-4004 Mode d'emploi

Epson

Epson TM H6000V-213P1 Manuel utilisateur

Epson

Epson Stylus C42 Series Guide d'installation

Epson

Epson ET-M3140 Series Manuel utilisateur

Epson

Epson Stylus COLOR 3000 Manuel utilisateur

Epson

Epson WorkForce Pro WP-4015 DN Manuel utilisateur

Epson

Epson TM-U330B Manuel utilisateur

Epson

Epson U950 - TM B/W Dot-matrix Printer Manuel utilisateur

Epson

Epson Stylus C64 Manuel utilisateur

Epson

Epson PM-400 Manuel utilisateur

Epson

Epson Stylus CX4100 Series Manuel utilisateur

Epson

Epson U300C - TM Dot-matrix Printer Manuel utilisateur

Epson

Epson XP-320 Manuel utilisateur

Epson

Epson SC-P9000 Series Manuel utilisateur

Epson

Epson TM-U220 Series Manuel utilisateur

Epson

Epson T605900 Instructions d'utilisation et d'entretien

Epson

Epson LG1-1070 Manuel utilisateur

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur

IRA3D

IRA3D POETRY4 Manuel utilisateur

Ricoh

Ricoh Aficio AP400 Manuel utilisateur

BIXOLON

BIXOLON SRP-352plusV Manuel utilisateur