Epson SC-F3000 Series Manuel utilisateur

How to Replace the Print

Head

CMP0270-01 EN

Copyrights and Trademarks

No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical,

photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. The information contained herein is designed

only for use with this Epson printer. Epson is not responsible for any use of this information as applied to other printers.

Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses

incurred by the purchaser or third parties as a result of accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to

this product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation’s operating and maintenance instructions.

Seiko Epson Corporation shall not be liable for any damages or problems arising from the use of any options or any consumable products other than those

designated as Original Epson Products or Epson Approved Products by Seiko Epson Corporation.

Seiko Epson Corporation shall not be held liable forany damage resulting from electromagnetic interference that occurs from the use of any interface cables

other than those designated as Epson Approved Products by Seiko Epson Corporation.

EPSON, EPSON EXCEED YOUR VISION, EXCEED YOUR VISION and their logos are registered trademarks or trademarks of Seiko Epson.

YouTube

and the YouTube logo are registered trademarks or trademarks of YouTube, LLC.

General Notice:Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any

and all rights in those marks.

SC-F3000 Series How to Replace the Print Head

Copyrights and Trademarks

Contents

Copyrights and Trademarks

Introduction

MeaningofSymbols........................4

Illustrations..............................4

About Doing User Self Repair Work

Notes on Safety

Work Flow

WhenaPrintHeadNeedstoBeReplaced........7

OverviewofWork.........................8

How to Start in User Self Repair Mode

How to Do Diagnosis

DiagnosisProcedure.......................11

How to Do Cleaning(Heavy).................11

Changing the Settings for Nozzle Compensation

......................................11

Replacement Procedure

Preparation..............................13

NotesonHandling........................13

NotesonStorage........................13

NotesonOpening.......................13

CorrectlyHoldingthePrintHead...........14

DoNotTouchTheseAreas................14

HowtoRemove..........................14

HowtoInstall............................19

ProcessafterReplacement...................21

AboutUsedPrintHeads....................22

Adjustment Work

Preparation..............................23

Execute Print Head Alignment...............23

Executing Head Interval X Uni-D Adjustment

......................................24

Executing Head Interval Y Adjustment.........25

ConfirmtheAdjustmentResults..............26

Problem Solver

WhattoDoWhenaMessageIsDisplayed.......27

WhenaPrinterErrorOccurs.................28

SC-F3000 Series How to Replace the Print Head

Contents

Introduction

Meaning of Symbols

Warning: Warnings must be followed

to avoid serious bodily

injury.

Caution: Cautions must be followed to

avoid bodily injury.

Important: Important must be followed

to avoid damage to this

product.

Note: Notes contain useful or

additional information on

the operation of this product.

UIndicates related content.

Illustrations

The illustrations (including photos) may differ slightly

from the model you are using. Please be aware of this

when using the manual.

SC-F3000 Series How to Replace the Print Head

Introduction

About Doing User Self Repair Work

What is User Self Repair Work

Work that you do, such as when you start the printer in Self Repair mode and replace User Self Repair parts (Print

Head), is called "User Self Repair Work" in this manual.

Notes on Doing User Self Repair Work

Use the replacement Print Head and User Self Repair Mode for the following purposes only.

❏When the part has reached the end of its service life and needs to be replaced

❏When print results are not correct and clogged nozzles cannot be cleared

SC-F3000 Series How to Replace the Print Head

About Doing User Self Repair Work

Notes on Safety

This section lists precautions that must be taken to use the product safely and prevent damage to property or injury to

operators or others.

North American and Latin American users:

In addition, be sure to read the safety instructions in the online Notices.

Other regions:

In addition, be sure to read the "Safety Instructions" in the Setup Guide (booklet) or the Safety Instructions (booklet),

which is a separate manual.

Notes on Handling

Warning

Do not replace a Print Head without having been trained for User Self Repair.

An electric shock or injury could occur.

SC-F3000 Series How to Replace the Print Head

Notes on Safety

Work Flow

When a Print Head Needs to Be Replaced

A Print Head needs to be replaced in the following situations. The work is different for both situations.

When the part has reached the end of its service life:

A Print Head has reached the end of its service life if any of the following 16 digit numbers appears in the enclosure

shown on screen.

“0000020000000000”/“0000040000000000”/“0000060000000000”

Make a note of the number, then press Replace Parts to turn off the printer. Next, start the printer in User Self Repair

Mode, and then replace the Print Head with the replacement one.

If a number other than those above is displayed, contact your dealer or Epson Support and tell them the 16 digit code.

When print results are not correct:

If the print results are not improved after doing the following measures, start the printer in User Self Repair Mode and

do a Diagnosis.

❏Execute Head Cleaning - Cleaning(Heavy)

If the clogs are not cleared after doing this once, then execute Cleaning(Heavy) again one more time.

❏Clean around the Print Heads and the edges of the metal

❏Clean the Suction Cap

❏Replace the Anti-Drying Caps

For the procedures to clean and replace the various parts, see the User's Guide (Online Manual).

Only replace a Print Head with a replacement one if the Diagnosis determines that a Print Head needs to be replaced.

SC-F3000 Series How to Replace the Print Head

Work Flow

Overview of Work

1. Start the printer in User Self Repair Mode

U“How to Start in User Self Repair Mode” on page 9

If the print results are not correct, do a Diagnosis, and take measures according to the diagnosis results.

The Print Head may not need to be replaced if you just change the settings or do Cleaning(Heavy).

U“How to Do Diagnosis” on page 11

2. Replacing a Print Head

U“Replacement Procedure” on page 13

3. Adjusting a Print Head

U“Adjustment Work” on page 23

SC-F3000 Series How to Replace the Print Head

Work Flow

How to Start in User

Self Repair Mode

You can check the procedure in a video on YouTube.

Epson Video Manuals

Check that the printer's power is off.

Place right thumb or an approximately 25 mm

(0.98 in.) diameter coin on the area shown

in the illustration of the printer screen below, so it

is not exposed to light.

While maintaining the conditions from step 2,

press and hold the power button until the screen

in the illustration appears. (about 20 seconds)

If the screen in the illustration does not appear,

and the power just comes on as normal, turn off

the power and redo the procedure from step 2.

Input the "32998" passcode.

❏Press the right side of the screen to change the

numbers from 0 to 9.

❏Press the left side of the screen to confirm the

selected number and advance to the next digit

for input.

Press the center of the screen 2 times to confirm

the passcode.

The printer starts in User Self Repair Mode.

Check the on-screen messages, and then press

OK.

Starting is successful if User Self Repair Mode

appears in the upper left of the screen, as in the

illustration.

SC-F3000 Series How to Replace the Print Head

How to Start in User Self Repair Mode

If it does not appear, turn off the power and redo

the procedure from step 2.

SC-F3000 Series How to Replace the Print Head

How to Start in User Self Repair Mode

Autres manuels pour SC-F3000 Series

Table des matières

Autres manuels Epson Imprimante

Epson

Epson 1520 - Stylus Color Inkjet Printer Manuel utilisateur

Epson

Epson AcuLaser CX11N Instructions de montage

Epson

Epson AcuLaser C2600N Manuel utilisateur

Epson

Epson Workforce WF-7310 Series Manuel utilisateur

Epson

Epson PowerLite 7000 Manuel de la liste des pièces

Epson

Epson Stylus CX4900 Series Manuel utilisateur

Epson

Epson Stylus SX110 Manuel utilisateur

Epson

Epson L800 Mode d’emploi

Epson

Epson Stylus Photo 700 Manuel utilisateur

Epson

Epson L555 Mode d’emploi

Epson

Epson TM-T88V Manuel utilisateur

Epson

Epson 570e - LQ B/W Dot-matrix Printer Manuel d'utilisation et d'entretien

Epson

Epson Stylus Photo R360 Mode d’emploi

Epson

Epson ET-3710 Mode d’emploi

Epson

Epson NX110 - Stylus Color Inkjet Mode d’emploi

Epson

Epson Expression Home XP-300 Mode d’emploi

Epson

Epson Stylus pro 7700m Manuel utilisateur

Epson

Epson ActionNote 880 Manuel utilisateur

Epson

Epson FX-2190 Manuel utilisateur

Epson

Epson AcuLaser M7000N series Manuel utilisateur

Epson

Epson LQ-2170 Manuel utilisateur

Epson

Epson TM-T88IV ReStick Manuel d'utilisation et d'entretien

Epson

Epson U675 - TM Color Dot-matrix Printer Manuel utilisateur

Epson

Epson L3250 Mode d’emploi

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur

IRA3D

IRA3D POETRY4 Manuel utilisateur

Ricoh

Ricoh Aficio AP400 Manuel utilisateur

BIXOLON

BIXOLON SRP-352plusV Manuel utilisateur