Epson PowerLite 7500 Manuel utilisateur

User’s Guide

Printed on recycled paper

Nflight.bk Page i Friday, September 1, 2000 8:32 AM

system, or transmitted in any form or by any means, electronic, mechanical,

photocopying, recording, or otherwise, without the prior written permission of SEIKO

EPSON CORPORATION. The information contained herein is designed only for use

with this EPSON printer. EPSON is not responsible for any use of this information as

applied to other printers.

Neither SEIKO EPSON CORPORATION nor its affiliates shall be liable to the

purchaser of this product or third parties for damages, losses, costs, or expenses incurred

by purchaser or third parties as a result of: accident, misuse, or abuse of this product or

unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.)

failure to strictly comply with SEIKO EPSON CORPORATION’s operating and

maintenance instructions.

SEIKO EPSON CORPORATION shall not be liable for any damages or problems

arising from the use of any options or any consumable products other than those

designated as Original EPSON Products or EPSON Approved Products by SEIKO

EPSON CORPORATION.

EPSON and EPSON Stylus are registered trademarks of SEIKO EPSON

CORPORATION.

AcuPhoto Halftoning and EPSON Store are trademarks of Epson America, Inc.

Adobe, PageMaker, Illustrator, PostScript, and the PostScript logo are registered

trademarks of Adobe Systems Incorporated.

PANTONE is a registered trademark and PANTONE CALIBRATED is a trademark of

Pantone, Inc.

General Notice: Other product names used herein are for identification purposes only and

may be trademarks of their respective owners. EPSON disclaims any and all rights in those

marks.

8/00

Nflight.bk Page ii Friday, September 1, 2000 8:32 AM

iii

Introduction

Do You Need PostScript? 1

Special Features 2

Macintosh System Requirements 3

Windows System Requirements 4

How To Use Your Manuals 4

Cautions, Notes, and Tips 5

Where To Get Help 6

1Installing EPSON Stylus

RIP for Macintosh

Checking the Printer 1-2

Determining Your Configuration 1-3

Standalone Configuration 1-3

Direct Connection Network Configuration 1-4

Typical Network Configuration 1-5

Installing EPSON Stylus RIP on

a Standalone or Print Server Macintosh 1-6

Installing EPSON Stylus RIP on a Client Macintosh 1-8

Contents

Nflight.bk Page iii Friday, September 1, 2000 8:32 AM

Contents

Color Matching 1-9

Press Simulations 1-9

ColorSync 2.x Support 1-10

PANTONE Color Support 1-10

2Printing with EPSON

Stylus RIP for Macintosh

Setting Up the EPSON Stylus RIP Server 2-2

Configuring EPSON Stylus RIP Preferences 2-4

Setting Up Your PostScript Printer 2-5

Printing from an Application 2-8

Sending the Print Job 2-9

Setting Print Job Options 2-10

Starting the EPSON Stylus RIP Server Software

Automatically 2-14

Drag and Drop Printing 2-15

Managing Print Jobs 2-16

Using the Stylus RIP Monitor 2-17

3Installing EPSON Stylus

RIP for Windows

Checking the Printer 3-2

Installing the EPSON Stylus RIP Software 3-2

Installing the PostScript Driver on Windows 95,

Windows 98, and Windows NT 3-5

Installing the PostScript Driver on Windows 2000 3-8

Setting Up Network Printing 3-11

Enabling File and Print Sharing 3-11

Connecting the Client Computers 3-12

Nflight.bk Page iv Friday, September 1, 2000 8:32 AM

Contents

Color Matching 3-12

ICC Support 3-13

PANTONE Color Support 3-14

4Printing with EPSON

Stylus RIP for Windows

Printing from an Application 4-1

Starting EPSON Stylus RIP 4-2

Printing with the Default Options 4-2

Printing and Setting Printer Options 4-3

Managing Print Jobs 4-8

Batch Printing 4-9

Network Printing 4-10

Sending Print Jobs from Client Computers 4-10

Configuring EPSON Stylus RIP 4-11

Setting EPSON Stylus RIP Preferences 4-11

Starting EPSON Stylus RIP Automatically 4-12

5Troubleshooting

Printing High Quality Color Images 5-1

Solving Problems 5-2

You see a Printer cannot be opened or Printer not

found error message (Macintosh) 5-2

You see a memory or VM error message (Macintosh) 5-3

You see a communications error message when you

try to open EPSON Stylus RIP 5-3

EPSON Stylus RIP does not run (Windows) 5-3

Your saved files don’t print (Windows) 5-4

Nflight.bk Page v Friday, September 1, 2000 8:32 AM

Contents

EPSON Stylus RIP takes a long time before printing

starts 5-4

Your printouts contain incorrect fonts or jagged type 5-4

The printer is producing pages containing illegible

type or characters 5-5

Images and type look bitmapped and jagged on your

printouts 5-5

You see Font not found or Find font error messages

(Macintosh) 5-6

One or more colors are missing in your printout or

it prints in black ink only 5-6

Your printed output has white lines 5-7

Bitmap images or clip art looks jagged 5-7

You’re having trouble printing from PageMaker 6.0

or 6.5 (Windows) 5-7

EPS and TIFF files do not print 5-7

Your printout has misplaced images or type 5-8

Printed images are clipped at the edges 5-8

Your Macintosh freezes when you try to print from

QuarkXPress 5-8

Your Macintosh loses custom page sizes when

selecting PDF file output from QuarkXPress 3.3x 5-8

Index

Nflight.bk Page vi Friday, September 1, 2000 8:32 AM

The EPSON Stylus®RIP software lets you use your EPSON

Stylus Color or EPSON Stylus Photo ink jet printer as a

PostScript®3 (Macintosh®, Windows®2000, and

Windows NT®) and Level 2 (Windows 95 and 98) compatible

printer. It reads the Adobe®PostScript files automatically

created by the EPSON Stylus RIP printer driver, seamlessly

converts them into raster images, and automatically prints them

on your printer. You can use the EPSON Stylus RIP with both

Macintosh and Windows systems, in standalone or networked

configurations.

Adobe PostScript is the industry standard for high-quality

graphic output. All the elements in a document—including

text, graphics

, and other images—are processed and reproduced

using PostScript code. Then, when you print from an application

such as QuarkXPress,

the RIP software creates a raster image

from the PostScript code and sends it to your printer.

Do You Need PostScript?

In many cases, you may not need the ability to print in

PostScript, and for these occasions you should use the standard,

non-PostScript driver that comes with your printer. Using the

standard driver is also a good way to ensure that your computer

and printer are connected and working properly, so make sure

you install the non-PostScript EPSON driver following the

instructions in your printer’s setup documentation.

Introduction

Nflight.bk Page 1 Friday, September 1, 2000 8:32 AM

Introduction

Here’s what you can use the EPSON Stylus RIP for:

◗Printing documents with placed or imported EPS images

◗Printing from complex PostScript-based drawing and

publishing applications like Adobe Illustrator,

Macromedia®Freehand,

®Adobe PageMaker,

®QuarkXPress,

and CorelDRAW™

◗Matching PANTONE®spot colors

For all other printing applications, especially photography, use the

standard, non-PostScript EPSON driver. In many cases, you will

get better performance with the standard driver than with the

EPSON Stylus RIP.

Special Features

To make the most of your printer’s photo-quality output, the

EPSON Stylus RIP software includes these special features:

◗EPSON error diffusion software, the same high-quality

AcuPhoto Halftoning™technology used in EPSON’s

non-PostScript printer drivers

◗PANTONE professional color palette files—calibrated for

your EPSON Stylus Color or EPSON Stylus Photo printer

using a variety of media at various resolutions—to give you

PANTONE colors when you use PANTONE licensed

applications

◗Support for ColorSync®2.x on the Macintosh and Image

Color Matching (ICM) for Windows through

International Color Consortium®(ICC) profiles

◗Press Simulation, which adjusts your EPSON printer’s

color gamut to more closely match the output of

SWOP-coated printing devices

Nflight.bk Page 2 Friday, September 1, 2000 8:32 AM

Introduction

Macintosh System Requirements

To use EPSON Stylus RIP with a Macintosh in either a

standalone or network environment as a print server, your

system should meet the following minimum requirements:

◗Power Macintosh,

®iMac™series, or Power Macintosh G3

or G4 series

◗At least 16MB of available RAM for the EPSON Stylus

RIP software (20MB or more is recommended), in

addition to the RAM needed by your operating system and

other applications

◗

At least 52MB of free hard disk space to install the software

and at least 150MB of free hard disk space for processing large

files

◗Macintosh Operating System 8.5.1 or later

◗CD-ROM drive

◗Serial, Ethernet, or USB connection to the printer. The

USB connection can be either a built-in USB port or the

EPSON USB Adapter kit (part number C-USB-PK4).

To set up a Macintosh as a client on a network using the

EPSON Stylus RIP, your system must have the following

minimum configuration:

◗Macintosh Centris,

®Macintosh Quadra,

®Performa,

®Power

Macintosh, iMac series, or Power Macintosh G3 or G4

series

◗Ethernet™AppleTalk®connection with the Macintosh set

up as the EPSON Stylus RIP print server

◗8MB RAM

◗

At least 2MB of free hard disk space to install the software and

at least 150MB of free hard disk space for processing large files

◗Macintosh Operating System 7.6.1 or later

◗CD-ROM drive

Nflight.bk Page 3 Friday, September 1, 2000 8:32 AM

Introduction

Windows System Requirements

To use the EPSON Stylus RIP in either a standalone or

peer-to-peer network environment, your system should include:

◗IBM®-compatible PC with 486 or higher processor

(Pentium®133 MHz or higher recommended)

◗Microsoft Windows 95/98, Windows 2000 or

Windows NT 4.0

◗At least 16MB of RAM (32MB or more recommended)

◗At least 50MB of free hard disk space to install the software

and at least 150MB of free hard disk space for processing

files (more for large files)

◗CD-ROM drive

◗An available parallel port configured as LPT1

You can print with the EPSON Stylus RIP on a peer-to-peer

Windows network by using file sharing, with the printer

connected to the print server’s parallel port. In this networked

environment, you install the EPSON Stylus RIP software on

the print server only. Users printing from applications on client

computers need to direct their PostScript output to a file on the

shared folder on the print server. See page 3-5 for instructions.

How To Use Your Manuals

Before you install the RIP, make sure you set up your printer

and install the standard EPSON non-PostScript driver that

came with your printer, following the instructions in your

printer’s documentation. Also, refer to your EPSON printer’s

documentation for instructions on using and maintaining your

printer.

Nflight.bk Page 4 Friday, September 1, 2000 8:32 AM

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Epson Imprimante

Epson

Epson WF-5110 Manuel utilisateur

Epson

Epson FX-880+ Manuel utilisateur

Epson

Epson LQ-1170 Manuel utilisateur

Epson

Epson SC-S80600 Series Manuel utilisateur

Epson

Epson U230 - TM Two-color Dot-matrix Printer Manuel utilisateur

Epson

Epson XP-231 Mode d’emploi

Epson

Epson WF-C878R Series Manuel utilisateur

Epson

Epson TM-T88II Series Manuel utilisateur

Epson

Epson R200 - Stylus Photo Color Inkjet Printer Manuel utilisateur

Epson

Epson L1210 Manuel utilisateur

Epson

Epson L800 Mode d’emploi

Epson

Epson TM-U220 Series Manuel utilisateur

Epson

Epson SL-D800 Series Manuel utilisateur

Epson

Epson XP-6000 Manuel utilisateur

Epson

Epson WF-100 Mode d’emploi

Epson

Epson Stylus PHOTO 870 Manuel utilisateur

Epson

Epson ET-4550 Mode d’emploi

Epson

Epson WF-R5690 Manuel utilisateur

Epson

Epson Stylus Color 800 Manuel utilisateur

Epson

Epson Stylus Pro 7900 Manuel d'utilisation et d'entretien

Epson

Epson SC-P900 Series Manuel utilisateur

Epson

Epson STYLUS CX3700 SERIES Manuel utilisateur

Epson

Epson Stylus Color 880 Manuel utilisateur

Epson

Epson Stylus C92 Series Manuel utilisateur

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur

IRA3D

IRA3D POETRY4 Manuel utilisateur

Ricoh

Ricoh Aficio AP400 Manuel utilisateur

BIXOLON

BIXOLON SRP-352plusV Manuel utilisateur