Epson C11CA27201 - WorkForce 40 Color Inkjet... Manuel utilisateur
Network Installation Guide
2Before You Begin
Before You Begin
Make sure you installed ink cartridges and loaded paper as described on the
Start Here sheet. Then follow the instructions in this guide to set up the printer
for use on a network.
Tip:
For a video tutorial and other information on how to connect the printer to your wireless
network, go to: epson.com/support/wireless
Do one of the following:
■If you’re installing the printer for the first time, see below.
■If you’re setting up an additional computer to use the printer on the network,
follow the steps in “Install on Additional Computers” on page 23.
Choose Your Connection Type
Wireless. To make a wireless connection for your printer, see page 3.
Wired. To connect your printer with an Ethernet cable, see page 15.
Wireless Network Installation 3
Wireless Network Installation
To connect your printer wirelessly, you need to know the name (SSID) of your
wireless network. If your network has security enabled, you also need to know the
WEP key or WPA passphrase. Write down this information below:
■Network name (SSID): _________________________________________
■WEP key or WPA passphrase: ____________________________________
This information is stored in your network’s router, and may have been entered
when the router was first set up. If you don’t have this information, contact the
person who set up your network before you begin. You may also be able to log
onto the router from your computer and check its setup screens. See your router’s
instruction manual for details.
Note:
You should also write down whether the WEP key is in ASCII or hexadecimal format. If
the WEP key is 5 or 13 characters, it’s ASCII. If it’s 10 or 26 characters, it’s hexadecimal.
If your router gives you a choice of WEP keys to use, note which one is currently active.
Usually the first WEP key is active, unless you’ve selected a different one.
If your passphrase contains upper- or lowercase letters, be sure to note them correctly.
The printer supports the following wireless security modes: WEP 64, WEP 128, and
WPA-PSK.
Connect the Ethernet Cable
Note:
This is a temporary connection used to configure the printer. You will be prompted to
remove the cable when configuration is complete.
1. Connect an Ethernet network cable to the LAN (10/100) port on your printer.
4Wireless Network Installation
2. Connect the other end to any available LAN port on your router, access point,
or hub.
If you don’t have access to an Ethernet port on your router, access point, or
hub, connect the printer directly to your computer’s Ethernet network port.
Note:
To use this configuration method, your computer must be connected to the
network wirelessly, and your computer’s Ethernet connection must be set to
obtain an IP address automatically.
3. Continue with the steps in the next section to install software.
Wireless Network Installation 5
Install Software
Before starting, make sure the printer is not connected with a USB cable. Only an
Ethernet cable should be connected.
1. Insert the printer software CD.
2. Windows Vista®:If you see the AutoPlay window, click Run EPSETUP.EXE.
When you see the User Account Control screen, click Continue.
Windows XP: When you see the Software Installation screen, continue with
step 3.
Mac OS®X: Double-click the icon.
3. Click Install.
6Wireless Network Installation
4. When you see this screen, select Install driver for network connection and
click Next.
5. Follow the on-screen instructions to install the software for your product.
Note:
These installations take several minutes to complete.
6. Select Set up this printer for the first time, then click Next.
7. Continue with the steps in the next section to configure the printer and add it
to your network.
8Wireless Network Installation
4. Do one of the following:
■If the printer is connected to your router, access point, or hub, select
Method 1: Connect via a router/access point (RECOMMENDED).
■If the printer is connected directly to your computer, select
Method 2: Connect directly to the computer (ADVANCED). You’ll
also need to temporarily turn off or disable your computer’s wireless
network connection. (You’ll turn it back on later.)
Important:
Do not select Method 3: Connect with WPS or SES (NOT SUPPORTED).
5. Click Next.
6. If you see a firewall alert message, click Unblock or Allow to let Epson
EasyInstall continue. Do not select Ask Me Later, Keep Blocking, or Block.
Wireless Network Installation 9
Note:
Make sure that you allow network access for Epson EasyInstall. In Windows, verify
that the publisher is SEIKO EPSON, then click Unblock. In Mac OS X, configure
your firewall software to allow network access for Epson EasyInstall.
7. Select the printer you want to configure, then click Next.
Note:
It may take up to 90 seconds for your computer to find the printer on the network.
If your printer doesn’t appear in the list after 90 seconds, make sure that the printer
is turned on and the Ethernet cable is connected as described on page 3. Then
click the refresh button.
8. If you turned off your computer’s wireless network connection in step 4, turn
it back on.
10 Wireless Network Installation
9. Select Wireless (remove Ethernet cable when prompted) as the network
communication type, then click Next.
10. Select your network name (SSID) from the list of available networks, then
click Next.
Note:
If your router or access point doesn’t broadcast its network name (SSID), select
Manually Enter Network Name (SSID) and enter the network name. Click Next.
On the next screen, select your wireless network security type, then click Next.
Autres manuels pour C11CA27201 - WorkForce 40 Color Inkjet...
1
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Epson Imprimante
Epson
Epson AcuLaser C3900N Manuel utilisateur
Epson
Epson CBB Manuel utilisateur
Epson
Epson ET-2830 Series Manuel utilisateur
Epson
Epson Mobilink TM-P60 Manuel utilisateur
Epson
Epson ET-M16600 Series Mode d’emploi
Epson
Epson Stylus Pro 5000 Manuel utilisateur
Epson
Epson ME 32 Manuel utilisateur
Epson
Epson SecurColor TM-C3400 Manuel d'utilisation et d'entretien
Epson
Epson l300 Mode d’emploi
Epson
Epson SureColor T3770D Manuel utilisateur
Epson
Epson Stylus Pro 7700 Series Manuel utilisateur
Epson
Epson Stylus Color 800 Fiche technique
Epson
Epson TM-U220-i Manuel utilisateur
Epson
Epson LQ-690 Mode d’emploi
Epson
Epson Stylus Color Stylus Color IIs Manuel utilisateur
Epson
Epson Stylus SX130 series Manuel utilisateur
Epson
Epson Stylus Color 640 Manuel utilisateur
Epson
Epson ET-2600 Mode d’emploi
Epson
Epson SureColor S30670 Manuel utilisateur
Epson
Epson EPL-N3000 Manuel utilisateur
