www.enware.com
5. Where the valve is replaced under warranty the replacement
valve carries a new warranty as detailed herein.
Warranty Exclusions:
Replacement work will be carried out as set out in the ENWARE
Warranty above, but the following exclusions may cause the
warranty to become void, and may incur a service charge
including cost of parts where:
6. Damage has been caused by accident, Acts of God, misuse,
incorrect installation of the hot water system of which the valve
forms a part or attempts to disassemble the valve.
7. It is found that there is nothing wrong with the valve.
8. The failure of the valve is due in part or in whole to faulty
manufacture/installation of the hot water system of which the
valve forms part.
9. The valve has failed directly or indirectly as a result of
excessive water pressure or temperature outside the Application
Guidelines, thermal input or corrosive environment.
10.The valve has failed due to foreign matter either from
installation or the water supply.
11.The failure of the valve is due to scale formation in the
waterways of the valve.
12.The failure of the valve is due in part, or in whole, to installation
not in conformance with the requirements of the Code.
13.ENWARE reserves the right to change its specications
without prior notice and will not accept liability for any claim
arising from such change.
14.Subject to any statutory provisions to the contrary, claims for
damage to furniture, carpets, walls, foundations or any other
consequential loss either directly or indirectly due to leakage
from the valve are also excluded from warranty cover.
TM = Trademark of
Enware Australia Pty Limited (ENWARE)
9 Endeavour Road, Caringbah NSW 2229
© All rights reserved 1996
