Enttec ALEPH1 Manuel utilisateur
User Manual
rev B
Document PN: 50386
ALEPH1
C NTR LLERS
T UC H IN T E R F A C E C N T R LL E R S F R A L E P H 1 L E D L I GH T S
79350/79351/79352/79353/79354
Features
•Touch-screen interface
•RGB and single colour strip dimming
•Up to 24 changing patterns or modes
•Auto sensing 12 to 24V DC
•Constant voltage PWM signal output
•Smooth dimming
•Power-loss memory recovery function
Introduction
The ALEPH1 interface touch controllers range is designed to
control RGB and single colour LED luminaries featuring a
unique touch interface technology with the function keys.
User does not need to have even small pressure on the keys
to create colour patterns.
This user oriented controller range can make automatic
recognition of 12 or 24V DC and with PWM in-built MCU can
perform smooth dimming for LED strips.
User Manual
rev B
Document PN: 50386
Safety
•Do not expose the units to rain or moisture
•Do not spill water or other liquids into or onto
the equipment.
•Do not exceed the rated 12-24 DC power supply.
Do not use home high voltage power supplies
•Never operate the equipment when it’s cover is
removed.
•This unit is intended for indoor use only, use of
this product outdoors voids all warranties.
Functional Description
1. 79354
The ALEPH1 RGB 8 BUTT NS T UCH PANEL LED
C NTR LLER is designed to control RGB strips driving up
to 6 Amps per channel. It has 16 pre-positioned changing
patterns and 20 levels for brightness adjustments. Also
supports 3 different remote wireless controls (sold
separately) adding great flexibility.
Screw Terminals:
Colour Patterns:
1. Static Red 9. Red Fades
2. Static Green 10. Green Fades
3. Static Blue 11. Blue Fades
4. Static Yellow 12. Yellow Fades
5. Static Purple 13. Purple Fades
6. Static Cyan 14. Cyan Fades
7. Static White 15. White Fades
8. Quick Colour Glow 16. Gradual Colour Glow
Keyboard Function:
1. P WER Power N/ FF
2. PAUSE Freeze the status. Invalid under static mode
3. M DE+ Jumps to next colour pattern
4. M DE- Jumps to previous colour pattern
5. SPEED+ Increases speed. Invalid under static mode
6. SPEED- Decreases speed. Invalid under static mode
7. BRT+ Increases brightness. Invalid under static mode
8. BRT- Decreases brightness. Invalid under static mode
Accessories (sold separately):
79360
-Colour Pulley: Sliding a finger on it will
allow a selection of 64 output colours +
function keys.
-Capable to drive several controllers at
the same time.
79361
-8 available keys to provide remote
functions to the controller.
Dimensions:
2. 79353
The ALEPH1 RGB+W+W C L UR SQUARE T UCH LED
C NTR LLER AMERICAN STANDARD WALL TYPE is
designed to control RGB plus two kind of white colour LED
strips (RGB+W+W) driving up to 3 Amps per each red, green
or blue channel and up to 4.5 Amps per each white channel.
It has 24 pre-positioned static and dynamic patterns and
brightness of all 64 colours in RGB full colour touch surface
ring can be adjusted.
User Manual
rev B
Document PN: 50386
Back Panel:
Colour Patterns:
1. Static Red 13. Yellow Fades
2. Static Green 14. Purple Fades
3. Static Blue 15. Cyan Fades
4. Static Yellow 16. White Fades
5. Static Purple 17. RGB circling
6. Static Cyan 18. RGB, yellow, purple, cyan
and white circling
7. Static White 19. RG glow
8. RGB jump change 20. RB glow
9. RGB, yellow, purple, cyan
and white jump change
21. GB glow
10. Red Fades 22. RGB gradual glow
11. Green Fades 23. 7 colour gradual glow
12. Blue Fades 24. Demo: cycles patterns 9,
18, 22 and 23
Dimensions:
3. 79352
The ALEPH1 RGB SQUARE WALLM UNT T UCH LED
C NTR LLER is designed to control RGB colour LED strips
driving up to 3 Amps per each red, green or blue channel. It
has 16 pre-positioned static and dynamic patterns and
brightness of all 64 colours in RGB full colour touch surface
ring can be adjusted.
Screw Terminals:
Colour Patterns:
1. Static Red 9. Seven colour glow
2. Static Green 10. Red Fades
3. Static Blue 11. Green Fades
4. Static Yellow 12. Blue Fades
5. Static Purple 13. Yellow Fades
6. Static Cyan 14. Purple Fades
7. Static White 15. Cyan Fades
8. Seven colour jump 16. White Fades
4. 79350
The ALEPH1 SINGLE C L UR SQUARE WALLM UNT T UCH
LED C NTR LLER is designed to control monochrome LED
strips driving up to 8 Amps. Its touch-ring allows 256 levels
of brightness adjustment and the plus and minus buttons
have a long press functionality for constantly adjusting
brightness. 2 handy shortcut buttons allow easy access to 20
and 100% brightness levels.
Screw Terminals:
User Manual
rev B
Document PN: 50386
5. 79351
The ALEPH1 WARM WHITE + C L WHITE (CTA) SQUARE
WALLM UNT T UCH LED C NTR LLER is designed to
control white and warm white (CTA) LED strips driving up
to 4 Amps per channel. Its touch-ring allows 256 levels of
white temperature adjustment by dimming both cool and
warm white luminaries along the range. Plus and minus
buttons have a long press functionality for constantly
adjusting colour output and 2 handy shortcut buttons
allow easy access to the coolest and warmest setting
levels.
Screw Terminals:
Dimensions (all square models):
Touch Keyboard Functions (all wallmount models):
Button Touch to turn the power N and FF
Button Touch to activate the brightness mode
(only available with static colour patterns)
Button Touch once to activate pattern selection
Touch again to activate speed selection
(button flashes in speed selection mode)
Button Previous pattern (in pattern selection mode)
Decrease speed (in speed selection mode)
Decrease brightness ( in brightness mode)
Button Previous pattern (in pattern selection mode)
Decrease speed (in speed selection mode)
Decrease brightness (in brightness mode)
Button Shortcut buttons allow pre defined settings
Wiring diagram
Specifications
rdering Information
ENTTEC PTY LTD ENTTEC AMERICAS
17/5 Samantha Court 604A Cornerstone Ct.
Knoxfield Victoria 3180 Hillsborough NC 27278
Australia USA
Tel: +61 3 9763 5755 Tel-Fax: (888) 454-5922
Fax: +61 3 9763 5688 email [email protected]
www.enttec.com
79350 (EU) 79351(EU) 79352 (EU) 79353 (US) 79354
Rated Voltage 12/24V DC
8A*1CH 4A*2CH 3A*3CH 6A*3CH
utput Type Common Anode
Channels 1 2 3 RGB ch 3 RGB ch
Weight (g) 105 105 105 165 126
Weight (lbs) 0.23 0.23 0.23 0.36 0.27
Patterns 16 24 16
Bright levels 256 256 64 64 20
utput Max.
Current
3A*3 RGB
4.5A*2White
utput Max.
Power
96W (12V)
192W (24V)
96W (12V)
192W (24V)
108W (12V)
216W (24V)
216W (12V)
432W (24V)
215W (12V)
423W (24V)
Ce manuel convient aux modèles suivants
5
Table des matières
Autres manuels Enttec Unité de contrôle
Manuels Unité de contrôle populaires d'autres marques
Festo
Festo Compact Performance CP-FB6-E Manuel de la liste des pièces
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur
JS Automation
JS Automation MPC3034A Manuel utilisateur
JAUDT
JAUDT SW GII 6406 Series Guide rapide
Spektrum
Spektrum Air Module System Manuel utilisateur
BOC Edwards
BOC Edwards Q Series Manuel utilisateur
