ENPC EP-PT11 Manuel utilisateur

EP-PT11

Motherboard for

Pentium MMX ™

User's Manual

Order Number 41010004

October, 1997

EC-CONFORMITY DECLARATION

(EC conformity marking)

FOR HE FOLLOWING EQUIPMEN :

Product Name : MO HERBOARD

Model: EP-P 11

Manufacturer: ENPC ECHNOLOGY CORP.

Manufacturer Address: 6FL., No. 19, Wu Chuan 6 Rd.,

Wu-Ku Industrial Park, aipei, aiwan.

IS HEREWI H CONFIRMED O COMPLY WI H HE EQUIPMEN S SE UP

IN HE COUNCIL DIREC IVE ON HE APPROXIMA ION OF HE LAW OF

MEMBER S A ES RELA ING O ELEC ROMAGNE IC COMPA IBILI Y

(89/336/EEC) AND LOW VOL AGE DIREC IVE 78/28/EEC. FOR HE

EVALUA ION REGARDING HE ELEC ROMAGNE IC COMPA IBILI Y

AND SAFE Y, HE FOLLOWING S ANDARDS WERE APPLIED:

* EN50081-1 (1992) : GENERIC EMISSION S ANDARDS

EN550022 (1994) : EMISSION

EN60555-2 (1987) : HARMONICS

EN60555-3 (1987) : VOL AGE FLUC UA IONS

* EN50082-1 (1992) : GENERIC IMMUNI Y S ANDARD

IEC 801-2 (1984) : ELEC ROS A IC DISCHARGE IMMUNI Y

IEC 801-3 (1984) : RADIA ED IMMUNI Y

IEC 801-4 (1988) : ELEC RICAL FAS RANSIEN

he manufacturer also declares the conformity of above mentioned product with the

actual required safety standards in accordance with LVD 73/23 EEC.

Manufacturer/Importer

Date: May 16, 1997

Signature: Signature:

Name: JEFF CHANG Name: PE ER CHEN

(Project Leader) (President)

EP-P 11 User's Manual

EP-PT11

Motherboard

for

Compatible PC

User Manual Rev 1.4

Related Motherboard: EP-P 11 P.C.B. Rev 1.4

Date: October, 1997

EP-P 11 User's manual

1. Introduction

FCC & DOC COMPLIANCE

Federal communications Commission tatement

his device complies with FCC Rules Part 15. Operation is subject to the

following two conditions:

his device may not cause harmful interference, and

his device must accept any interference received, including

interference that may cause undesired operation.

his equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. hese limits

are designed to provide reasonable protection against harmful interference

in a residential installation. his equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with

manufacturer's instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

Re-orient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment to an outlet on a circuit different from that to

which the receiver is connected.

Consult the dealer or an experienced radio/ V technician for help.

Warning: he use of shielded cables for connection of the monitor to the

graphics card is required to assure compliance with FCC regulations.

Changes or modifications to this unit not expressly approved by the party

responsible for compliance could void the user's authority to operate this

equipment.

Canadian Department of Communications tatement

his digital apparatus does not exceed the Class B limits for radio noise

emissions from digital apparatus set out the Radio Interference Regulations

for the Canadian Department of Communications.

EP-P 11 User's Manual

Table Of Contents

1. INTRODUCTION...................................................................................................

1.1 ABOU HIS MANUAL.............................................................................................

1.2 I EM CHECKLIS ......................................................................................................

1.3 SPECIFICA IONS.......................................................................................................

1.4 NO ES ON INS ALLA ION.......................................................................................

2. IN TALLATION....................................................................................................

2.1 MO HERBOARD LAYOU .........................................................................................

2.2 INS ALLA ION S EPS...............................................................................................

2.3 SYS EM MEMORY (SIMM AND DIMM).................................................................

2.3.1 SIMM/DIMM Memory Installation Procedures:............................................

2.4 CEN RAL PROCESSING UNI (CPU)........................................................................

2.4.1 Installing the CPU...........................................................................................

2.4.2 xpansion Cards.............................................................................................

2.5 EX ERNAL CONNEC ORS.........................................................................................

2.5.1 Keyboard Connector and USB Port................................................................

2.5.2 PS/2 Mouse Connector (J18)..........................................................................

2.5.3 Parallel Printer Port (CON2, 25-pin Female)................................................

2.5.4 Serial Ports (COM1, COM2, 9-pin Male Connector).....................................

2.5.5 AT & ATX Power Supply Connectors.............................................................

2.5.6 Floppy Drive Connector (J12, 34-pin block)..................................................

2.5.7 Primary/Secondary ID connectors. (J9 & J11: 40-pin blocks)....................

2.5.8 Front Panel Connector....................................................................................

2.5.9 CPU Cooling Fan Connector (J7, FAN).........................................................

2.5.10 IrDA Compliant Infrared Module Connector (J3: Front IR; J10: Rear IR).

2.5.11 xternal Battery Connector (J4)...................................................................

2.5.12 Clear CMOS Connector (J6).........................................................................

2.5.13 Flash BIOS Vpp (J19)...................................................................................

3. CPU ETTING ......................................................................................................

3.1 SE ING CPU YPE (J20)........................................................................................

3.2 EX ERNAL CLOCK FREQUENCY (SW1)...................................................................

3.3 CPUVCORE JUMPER SE INGS (JP1)....................................................................

3.4 CPUVCORE ABLE (JP1)......................................................................................

3.5 FREQUENCY RA IO SE INGS (JB1).......................................................................

EP-P 11 User's manual

iii

1. Introduction

1.1 About this Manual

his manual is arranged to help you set up and run this Pentium

MMX™ Motherboard as quickly as possible.

Information is presented in the following three chapters:

Chapter 1.

Introduction: his chapter presents the features of the motherboard;

what components and accessories should be included with it;

and describes the specifications of this product, including a

diagram of the motherboard layout.

Chapter 2.

Installation: his chapter shows how to install the motherboard, and

how to configure its various features and functions.

Chapter 3.

CPU Settings: his chapter contains all the technical information you

need to set the type, voltage, and clock speed of your CPU.

EP-P 11 User's Manual

1. Introduction

1.2 Item Checklist

his product comes with the following components:

Motherboard x 1

9-pin serial port & 25-pin parallel port flat cable with bracket x 1

Bracket with 25-pin serial port and PS/2 Mouse ribbon cable x 1

40-pin IDE connector flat cable x 1

34-pin floppy disk drive flat cable x 1

User's Manual x 1

Quick Setting Label x 1

Bus Master IDE Driver Diskette x 1

USB Connection Cable with bracket x 1 (Optional)

IrDA Module (Optional)

EP-P 11 User's Manual

1. Introduction

1.3 Specifications

Processor:

ZIF socket 7 support for intel® Pentium (P54C & P55C;)

Cyrix 6x86 (M1 & M2), and AMD K5/K6 Series processors

and CPU speeds up to 233MHz. .

Chipset:

intel® 82430 X System Controller, intel® 82371AB PCI

ISA IDE Xcelerator, I E 8679/8687 (Giga I/O Controller)

BIOS:

Award/AMI BIOS with DMI support, 1 to 2Mb Flash ROM

with Green PC, Plug-and-Play, ACPI, and PC97

System Memory:

4 x 72-pin SIMM / 2 x 168-pin DIMM Slots support up to

256MB. he system supports mixed memory technologies:

Extended Data Out (EDO), Fast Page (FP) DRAM, and

Synchronous DRAM (SDRAM).

On-board Multi-I/O:

1 x FDD Port support up to 2.88MB

1 x Parallel Port (LP ) support ECP/EPP

2 x High Speed Serial (16550 UAR ) Ports

2 x Universal Serial Bus (USB) Port

1 x A Keyboard Port

1 x PS/2 Mouse Port

1 x Real ime Clock (R C)

2 x IrDA

PCI Bus Master IDE:

2 x PCI Bus Master IDE Controllers

Support PIO Mode 3/4 EIDE Devices (HDD, CD-ROM, LS-

120 FDD, etc.);

EP-P 11 User's Manual

1. Introduction

Ultra DMA/33 mode; and HDD Auto-Detect

Expansion Slots:

4 x 32-bit PCI Bus Master Slots, 3 x 16-bit ISA Slots

2 x DIMM Connectors for SDRAM or EDO RAM

Cache Onboard:

512KB Pipeline Burst SRAM Cache

Options:

Infrared (IrDA) Wireless Interface Kit

Universal Serial Bus (USB) Connector Kit

Dimensions:

220mm x 250mm (8.7" x 10")

Form Factor:

Baby A Form Factor

EP-P 11 User's Manual

1. Introduction

1.4 Notes On Installation

his motherboard has been designed with the Intel 82430 X, PCI

chipset, which was developed by Intel Corporation to fully support

the Pentium Processor PCI/ISA system. he Intel 82430 X PCI

chipset provides increased integration and improved performance.

he chipset provides an integrated IDE controller with two high

performance IDE interfaces, for up to four IDE devices (hard devices,

CD-ROM device, etc). he I E 8679/8687 Super I/O controller

provides standard I/O functions: floppy interface, two serial ports with

16-Byte FIFO buffers, and an EPP/ECP-capable parallel port.

Care must be taken when inserting memory modules, inserting the

CPU, or even plugging PCI cards into associated slots to avoid

damaging any circuits or sockets on the motherboard. A cooling fan

is strongly recommended when installing P54C, P54C B, P55C, K5,

K6, 6x86, or M2 CPU, to avoid overheating.

he motherboard requires a minimum of 4MB of system memory,

and can support a maximum of 256MB.

he onboard L2 Cache comprises 256KB or 512KB of synchronous

SRAM to increase system performance.

he motherboard supports standard Fast Page (FP), EDO (Extended

Data Out), or SDRAM (Synchronous DRAM) memory, and provides

four 72-pin SIMMs and two 168-pin DIMMs. he sockets support

1Mx32(32MB) single-sided or double-sided memory modules.

Memory timing requires 70ns Fast Page devices or 60ns EDO RAM.

Memory parity generation and checking is not supported. (DRAM

Modules may be parity (x36) or non-parity (x32).

he board also has two onboard PCI IDE connectors, and detects the

IDE hard disk type through an automatic BIOS utility. he system

also supports Award Plug & Play BIOS for the ISA and PCI cards.

EP-P 11 User's Manual

Table des matières

Autres manuels ENPC Carte mère

ENPC

ENPC EP-MZ21 Manuel utilisateur

ENPC

ENPC EP-KE23 Manuel utilisateur

ENPC

ENPC EP-PT22 Manuel utilisateur

ENPC

ENPC EP-KL21 Manuel utilisateur

ENPC

ENPC EP-KL11 Manuel utilisateur

ENPC

ENPC EP-KB11 Manuel utilisateur

ENPC

ENPC EP-PS21 Manuel utilisateur

ENPC

ENPC KB22 Manuel utilisateur

ENPC

ENPC EP-PV12 Manuel utilisateur

ENPC

ENPC EP-PT21 Manuel utilisateur

ENPC

ENPC EP-PI11 Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur