EnOcean EASYFIT EWSSB Manuel utilisateur

USER MANUAL

EWSSB / EWSDB (REVISION DD)

EASYFIT BLUETOOTH® SINGLE / DOUBLE ROCKER WALL SWITCH

Patent protected:

WO98/36395, DE 100 25 561, DE 101 50 128,

WO 2004/051591, DE 103 01 678 A1, DE 10309334,

WO 04/109236, WO 05/096482, WO 02/095707,

US 6,747,573, US 7,019,241

Observe precautions! Electrostatic sensitive devices!

EWSSB / EWSDB

EASYFIT Bluetooth® Single / Double Rocker Wall Switch

USER MANUAL

EWSSB / EWSDB (REVISION DD)

EASYFIT BLUETOOTH® SINGLE / DOUBLE ROCKER WALL SWITCH

REVISION HISTORY

The following major modifications and improvements have been made to this document:

Version

Author

Reviewer

Date

Major Changes

2.0

MKA

22.02.2017

Initial Release

1.1

MKA

30.03.2017

Added step by step payload parsing example

1.2

MKA

30.06.2017

Added product label information

1.3

MKA

09.01.2018

Added Australia approval

1.4

MKA

30.05.2018

PTM 216B DB-05 update

1.5

MKA

20.12.2018

Separated EWSxB and PTM 216B product

documentation

1.6

MKA

25.05.2019

Added reference to PTM 216B User Manual

1.7

MKA

08.12.2020

Improved description of device label

1.8

25.04.2022

Added UKCA approval

2.0

MKA

14.07.2023

Update for revision DD (using PTM 216B)

Published by EnOcean GmbH, Kolpingring 18a, 82041 Oberhaching, Germany

www.enocean.com, [email protected], phone +49 (89) 6734 6890

Important!

This information describes the type of component and shall not be considered as assured

characteristics. No responsibility is assumed for possible omissions or inaccuracies. Circuitry

and specifications are subject to change without notice. For the latest product specifica-

tions, refer to the EnOcean website: http://www.enocean.com.

As far as patents or other rights of third parties are concerned, liability is only assumed for

modules, not for the described applications, processes and circuits.

EnOcean does not assume responsibility for use of modules described and limits its liability

to the replacement of modules determined to be defective due to workmanship. Devices or

systems containing RF components must meet the essential requirements of the local legal

authorities.

The modules must not be used in any relation with equipment that supports, directly or

indirectly, human health or life or with applications that can result in danger for people,

animals or real value.

Components of the modules are considered and should be disposed of as hazardous waste.

Local government regulations are to be observed.

Disposal

Product

Dispose of the used components at an official collection point

for electronic waste or at your local dealer.

Packing

Please use the recycling operators known to you.

 
USER MANUAL 
 
 
EWSSB / EWSDB (REVISION DD) 
EASYFIT BLUETOOTH® SINGLE / DOUBLE ROCKER WALL SWITCH 
 
© 2023 EnOcean | www.enocean.com F-710-017, V1.0 EWSSB / EWSDB User Manual | v2.0 | July 2023 | Page 3/19 
 
TABLE OF CONTENT 
1GENERAL DESCRIPTION .................................................................................4 
1.1 Basic functionality .........................................................................................4 
1.2 Ordering information .....................................................................................4 
1.3 Technical data...............................................................................................5 
1.4 Physical dimensions and mounting options .......................................................5 
1.5 Environmental conditions ...............................................................................5 
1.6 Packaging information....................................................................................5 
2FUNCTIONAL INFORMATION ...........................................................................6 
2.1 Product overview...........................................................................................6 
2.2 Compatible frames ........................................................................................7 
2.3 User interface ...............................................................................................8 
3PRODUCT LABEL ...........................................................................................9 
3.1 QR code format........................................................................................... 10 
4APPLICATION INFORMATION ........................................................................ 11 
4.1 Transmission range ..................................................................................... 11 
4.2 External magnets ........................................................................................ 12 
5Market Approval (Regulatory Information)...................................................... 13 
5.1 Market Approval for European Union (CE)....................................................... 13 
5.2 Market Approval for United Kingdom (UKCA) .................................................. 13 
5.3 FCC (United States)..................................................................................... 14 
5.3.1 Certificate........................................................................................... 14 
5.3.2 Regulatory Statement .......................................................................... 15 
5.4 ISED (former Industry Canada)..................................................................... 16 
5.4.1 Certificate........................................................................................... 16 
5.4.2 Regulatory Statement .......................................................................... 17 
5.4.2.1 English version ................................................................................. 17 
5.4.2.2 French version.................................................................................. 18 
5.5 ARIB (Japan) Construction Type Conformity Certifaction .................................. 19 
 
 

USER MANUAL

EWSSB / EWSDB (REVISION DD)

EASYFIT BLUETOOTH® SINGLE / DOUBLE ROCKER WALL SWITCH

1GENERAL DESCRIPTION

1.1 Basic functionality

This user manual described the EnOcean Easyfit Bluetooth® Single / Double Rocker Wall

Switch (EWSSB / EWSDB, jointly referred to as EWSxB) in product revision DD. EWSxB are

energy harvesting Bluetooth Low Energy (BLE) wall switches in the European 55 x 55 wall

switch form factor.

EWSxB are based on the maintenance free, self-powered Bluetooth push button transmitter

module PTM 216B. This User Manual describes of specifics of EWSxB finished products.

The energy harvesting BLE switch functionality of EWSxB products is provided by an inte-

grated PTM 216B module. For a description of the PTM 216B functionality, please refer to

the PTM 216B User Manual available at: https://www.enocean.com/en/enocean-modules-

24ghz-ble/details/ptm-215b/user-manual-pdf/ https://www.enocean.com/en/product/ptm-

216b

The PTM 216B module within EWSxB contains an electro-dynamic energy transducer which

is actuated by the EWSxB rocker movement. Whenever a rocker is pushed down or re-

leased, electrical energy is created and a set of Bluetooth advertising frames is transmitted

by the PTM 216B radio transmitter which identifies the rocker status (pushed or released).

Radio telegrams are protected with AES-128 security based on a device-unique private key.

„Long“ or „Short“ rocker press (the time between pushing and releasing the rocker) can be

calculated by the receiver. This enables switching, dimming control or jalousie control in-

cluding slat action

Figure 1 below shows the single rocker (EWSSB) and double rocker (EWSDB) product vari-

ants.

Figure 1 –EWSSB (single rocker) and EWSDB (double rocker) variants

1.2 Ordering information

Type

Ordering Code

EWSSB

E8221-A270:DD

EWSDB

E8221-A280:DD

USER MANUAL

EWSSB / EWSDB (REVISION DD)

EASYFIT BLUETOOTH® SINGLE / DOUBLE ROCKER WALL SWITCH

1.3 Technical data

Antenna

Integrated PCB antenna

Output Power

+4 dBm

Communication Range (Guidance Only)

75 m ideal line of sight / 15 m indoor environment

Communication Standard

Bluetooth Low Energy (Advertising)

Radio Frequency (min / max)

2402 MHz / 2480 MHz

Default Radio Channels

BLE CH 37 / 38 / 39 (2402 MHz / 2426 MHz / 2480 MHz)

Advertising Events per press or release

(min / max)

2 / 3

Default Data Rate and Modulation

1 Mbit/s GFSK

Configuration Interface

NFC Forum Type 2 Tag (ISO/IEC 14443 Part 2 and 3)

Device Identification

Unique 48 Bit Device ID (factory programmed)

Security

AES128 (CBC Mode) with Sequence Code

Power Supply

Integrated Kinetic Energy Harvester

Inputs

Single (EWSSB) or Double Rocker (EWSDB)

1.4 Physical dimensions and mounting options

Dimensions of Single Rocker (EWSSB)

50 x 50 mm

Dimensions of Double Rocker (EWSDB)

25 x 50 mm (for each of the two rockers)

Dimensions of Frame Insert

55 x 55 mm

Dimensions of Central Plate

71 x 71 mm

Dimensions of Frame

81 x 81 mm

1.5 Environmental conditions

Operating Temperature

-25°C ... 65°C

Storage Temperature

-25°C ... 65°C

Humidity

0% to 95% r.h. (non-condensing)

1.6 Packaging information

Packaging Unit 10 units

Packaging Method Each unit packed in a bag; 10 units packed in a box

USER MANUAL

EWSSB / EWSDB (REVISION DD)

EASYFIT BLUETOOTH® SINGLE / DOUBLE ROCKER WALL SWITCH

2FUNCTIONAL INFORMATION

2.1 Product overview

The different components of EWSSB are shown in Figure 2 below.

Figure 2 –Components of Easyfit Single Rocker Wall Switch EWSSB

Rocker

Frame

Central Plate

Frame Insert

PTM 216B Module

USER MANUAL

EWSSB / EWSDB (REVISION DD)

EASYFIT BLUETOOTH® SINGLE / DOUBLE ROCKER WALL SWITCH

2.2 Compatible frames

Single and double rocker wall switch are shipped with a Gira Standard55 frame. The switch

frame can be replaced by frames of the design programs listed in Table 1 below.

Manufacturer

Product Program

BERKER

S1, B1, B3, B7 Glas

GIRA

Standard55, E2, Event, Esprit

JUNG

A500, Aplus

MERTEN

M-Smart, M-Arc, M-Plan

Table 1 –EWSSB / EWSDB compatible switch frames

USER MANUAL

EWSSB / EWSDB (REVISION DD)

EASYFIT BLUETOOTH® SINGLE / DOUBLE ROCKER WALL SWITCH

2.3 User interface

EWSSB and EWSDB are implemented based on the EnOcean PTM 216B module which is

shown in Figure 3 below.

Figure 3 –PTM 216B module (shown with and without rocker)

The PTM 216B module provides four button contacts. These button contacts re grouped into

two channels (Channel A and Channel B) with each channel containing two button contacts

(State O and State I).

The button contacts of the PTM 216B module are either actuated by one (single) rocker

(EWSSB) or two (double) rockers (EWSDB). For the case of the single rocker variant

EWSSB, only channel B is actuated by the single rocker (actuating either B0 or BI). For the

case of the double rocker variant EWSDB, each channel (A or B) is actuated by one of the

two rockers so that one rocker actuates A0 or AI while the other actuates B0 or BI.

The state of all four button contacts (pressed or not pressed) is transmitted together with a

unique device identification (48-bit source address) whenever a rocker is pushed or re-

leased.

Figure 4 below shows the arrangement of the four button contacts on the PTM 216B module

and their designation.

Figure 4 –Button contact designation of the PTM 216B module

Please refer to the PTM 216B user manual for detailed technical information about the PTM

216B module.

CHANNEL

STATE

CHANNEL

STATE

USER MANUAL

EWSSB / EWSDB (REVISION DD)

EASYFIT BLUETOOTH® SINGLE / DOUBLE ROCKER WALL SWITCH

3PRODUCT LABEL

Each EWSSB or EWSDB product contains a device label as shown in Figure 5 below. This

example label identifies the following parameters in writing:

◼Product name (EWSSB)

◼Order number (E8221-A270)

◼Product revision (DA-01)

◼Manufacturing date (week 10, 2017)

◼Static Source Address (E21501234567)

◼Serial Number (07123456)

The device label also encodes certain parameters within an automatically readable QR code

in the lower right corner as described in chapter 0.

Figure 5 below shows the device label incl. the QR code in the lower right corner.

Figure 5 –Example of product label

USER MANUAL

EWSSB / EWSDB (REVISION DD)

EASYFIT BLUETOOTH® SINGLE / DOUBLE ROCKER WALL SWITCH

3.1 QR code format

The QR code used on the EWSSB / EWSDB product label encodes the product parameters

according to the ANSI/MH10.8.2-2013 standard with the structure shown in Table 2 below.

Data Identifier

Data Length

(excluding identifier)

Data Content

30S

12 characters

Source Address (hexadecimal)

32 characters

Security Key (hexadecimal)

31Z

8 characters

NFC PIN Code (0000E215)

30P

Up to 10 characters

Ordering Code

4 characters

Step Code and Revision

8 characters

(including leading zero)

Serial Number (always starts with 07)

Table 2 –EWSxB product QR code structure

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels EnOcean Changer

EnOcean

EnOcean Easyfit EWSSB Manuel utilisateur

EnOcean

EnOcean EASYFIT ESRPB Manuel utilisateur

EnOcean

EnOcean EASYFIT EWSXZ Manuel utilisateur

EnOcean

EnOcean Easyfit EWS Z Series Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur